Abstract
This study aims to investigate the effect of material type and braiding angle on the performance characteristics of the reinforced multi-layered hose, to manufacture a high-pressure fuel hose. For this purpose, NBR (Acrylo-Nitrile Butadiene rubber)/CPE (chlorinated polyethylene) fuel hose was manufactured using a single-screw extruder and for the production of the reinforcement layer, braiding technology was used. With an attempt to discuss the effect of braiding angle on the performance characteristics of the reinforced multi-layered hose, the speed of the radial braiding machine was altered. E-glass, aramid, carbon, polyester, and basalt yarns were used for the production of the braided layer. Then CPE (chlorinated polyethylene) rubber was extruded for the cover application. Performance properties of the fuel hose such as hardness, ply adhesion, vacuum collapse bursting pressure, and diametric expansion were measured and evaluated according to the requirements of the related standards. The results revealed that, with increased braiding speed, ply adhesion, vacuum collapse, and diametric expansion properties of hoses increase, while hardness, permanent deformation, and bursting pressure of hoses decrease. It has been determined that NBR/Basalt/CPE fuel hose produced in 4m/min braiding speed provided optimum functional and adhesion properties, because of its hardness, permanent deformation, bursting, and vacuum test values at 25°C are within the limit. Additionally, the results were verified by running finite element analysis (FEA) using the ANSYS simulation program.
Keywords
high pressure rubber composites with technical textile reinforcement high-performance yarns braiding fuel hose
Supporting Institution
The Scientific and Technological Research Council of Turkey (TUBITAK)
Project Number
217M004 and 217M005
Thanks
This work is supported by The Scientific and Technological Research Council of Turkey (TUBITAK) with grant numbers 217M004 and 217M005.
References
- Molded hose, formed hose and reinforced rubber hose. 2021, 10.27, Retrieved from https://www.unitedrubber.net/pdf/product-sheets/rubber-hoses.pdf.
- Kim JK, Thomas S, Saha P. 2016. Multicomponent Polymeric Materials, Dortdrecht: Springer.
- Fuel hose. 2021, 10.27, Retrieved from https://www.stahlbus.com/info/en/products/fuel-hoses.
- Wooton DB. 2001. The Application of Textiles in Rubber, UK: Rapra Technology Limited.
- Bogdanovich AE. 2016. An overview of three-dimensional braiding technologies. In Y. Kyosev (Ed.), Advances in Braiding Technology: Specialized Techniques and Applications. UK: Elsevier, 5.
- Kyosev Y. 2015. Braiding Technology for Textiles. UK:Elsevier.
- Fuel System: Components, Working Principles, Symptoms and Emission Controls. 2021, 10.27, Retrieved from https://www.ingenieriaymecanicaautomotriz.com/fuel-system-components-working-principles-symptoms-and-emission-controls/.
- Kısacık F. 2006. İki komponentli kauçuk hortum (yayınlanmamış yüksek lisans tezi), Kocaeli Üniversitesi Fen Bilimleri Enstitüsü, Kocaeli.
- Savran,HÖ. 2001. Elastomer Teknolojisi-I, İstanbul:Acar Matbaacılık.
- Bunsell, A.R. 2018. Handbook of Properties of Textile and Technical Fibres. UK: Woodhead Publishing
- Alagirusamy R, Padaki NV. 2016. Introduction to braiding. In S. Rana and R. Fangueiro (Eds.), Braided structures and composites. Boca Raton: CRC Press.
- Horrocks AR, Anand SC. 2000. Handbook of Technical Textiles. UK: Elsevier.
- Basalt fibers, Lance Brown import and export data sheet, 2019, 02.26, Retrieved from: http://www.lbie.com/PDF/n3011.pdf.
Abstract
Project Number
217M004 and 217M005
References
- Molded hose, formed hose and reinforced rubber hose. 2021, 10.27, Retrieved from https://www.unitedrubber.net/pdf/product-sheets/rubber-hoses.pdf.
- Kim JK, Thomas S, Saha P. 2016. Multicomponent Polymeric Materials, Dortdrecht: Springer.
- Fuel hose. 2021, 10.27, Retrieved from https://www.stahlbus.com/info/en/products/fuel-hoses.
- Wooton DB. 2001. The Application of Textiles in Rubber, UK: Rapra Technology Limited.
- Bogdanovich AE. 2016. An overview of three-dimensional braiding technologies. In Y. Kyosev (Ed.), Advances in Braiding Technology: Specialized Techniques and Applications. UK: Elsevier, 5.
- Kyosev Y. 2015. Braiding Technology for Textiles. UK:Elsevier.
- Fuel System: Components, Working Principles, Symptoms and Emission Controls. 2021, 10.27, Retrieved from https://www.ingenieriaymecanicaautomotriz.com/fuel-system-components-working-principles-symptoms-and-emission-controls/.
- Kısacık F. 2006. İki komponentli kauçuk hortum (yayınlanmamış yüksek lisans tezi), Kocaeli Üniversitesi Fen Bilimleri Enstitüsü, Kocaeli.
- Savran,HÖ. 2001. Elastomer Teknolojisi-I, İstanbul:Acar Matbaacılık.
- Bunsell, A.R. 2018. Handbook of Properties of Textile and Technical Fibres. UK: Woodhead Publishing
- Alagirusamy R, Padaki NV. 2016. Introduction to braiding. In S. Rana and R. Fangueiro (Eds.), Braided structures and composites. Boca Raton: CRC Press.
- Horrocks AR, Anand SC. 2000. Handbook of Technical Textiles. UK: Elsevier.
- Basalt fibers, Lance Brown import and export data sheet, 2019, 02.26, Retrieved from: http://www.lbie.com/PDF/n3011.pdf.
Details
| Primary Language | English |
|---|---|
| Subjects | Wearable Materials |
| Journal Section | Articles |
| Authors | |
| Project Number | 217M004 and 217M005 |
| Early Pub Date | September 30, 2022 |
| Publication Date | September 30, 2022 |
| Submission Date | November 5, 2021 |
| Acceptance Date | May 23, 2022 |
| Published in Issue | Year 2022 Volume: 32 Issue: 3 |
