Research Article
BibTex RIS Cite

Otonom Dozer için Küreme Algoritması Geliştirilmesi

Year 2018, Volume: 6 Issue: 1, 292 - 308, 31.01.2018
https://doi.org/10.29130/dubited.349423

Abstract

Bu çalışmada insan müdahalesi olmadan küreme işleminin
gerçekleştirilebilmesi için yeni bir küreme algoritması geliştirilmiştir.
Algoritmaya uygun biçimde küreme ve tesviye işlemlerini gerçekleştirmesi için
küçük ölçekli bir otonom iş makinesinin yapması gereken hareketler
hesaplanmıştır. Küreme algoritması arazi şeklinden bağımsız olarak
programlanmıştır. Arazi modeline ve kazı projesine bağlı olarak dozer
üzerindeki küreme bıçağının yapacağı hareketler hesaplanmıştır. Bıçak
hareketleri hesaplanırken iş makinesinin motor gücü, hidrolik aksamın
uygulayabileceği kuvvet ve bıçak boyutları göz önünde bulundurulmuştur. Arazi
ızgara biçiminde satır ve sütunlara ayrılarak gerekli küreme işlemini kuzey
güney doğrultusu boyunca yapacak biçimde dozerin hareketleri belirlenmiştir. İş
makinesinin, küreme alanı koordinatları ve yüksekliğinin tanımlanması durumunda
dışarıdan hiçbir müdahale ve komut almadan küreme işini gerçekleştirebilecek biçimde
küreme algoritması oluşturulmuştur. Dikdörtgen bir arazi modeli oluşturulmuş ve
bu arazi modeli üzerinde geliştirilen algoritma başarıyla uygulanmıştır. Geliştirilen
algoritma otonom iş makinesinin ihtiyaç duyduğu yapay zekânın geliştirmesinde
önemli bir adımdır.

References

  • [1] Bettemir, Ö. H., ve Burak Tombaloğlu. "Kürüme İçin Küçük Ölçekli Otonom İş Makinesi Tasarımı ve Üretimi." Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 28.3 (2013).
  • [2] Zhong, DengHua, Ping Zhang, ve KangXin Wu. "Theory and practice of construction simulation for high rockfill dam." Science in China Series E: Technological Sciences 50 (2007): 51-61.
  • [3] Lu, Ming, vd. "Positioning and tracking construction vehicles in highly dense urban areas and building construction sites." Automation in construction 16.5 (2007): 647-656.
  • [4] Vahdatikhaki, Faridaddin, Amin Hammad, ve Hassaan Siddiqui. "Optimization-based excavator pose estimation using real-time location systems." Automation in Construction 56 (2015): 76-92.
  • [5] Hammad, Amin, Faridaddin Vahdatikhaki, ve Cheng Zhang. "A novel integrated approach to project-level automated machine control/guidance systems in construction projects." Journal of Information Technology in Construction (ITcon) 18.9 (2013): 162-181
  • [6] Jurasz, Jaroslaw, ve K. Kley. "A Cost-Effective Positioning Solution For Asphalt Rollers Based On Low-Cost DGPS Receivers." NIST SPECIAL PUBLICATION SP (2003): 403-408.
  • [7] Hung, Wei-Han, ve Shih-Chung Jessy Kang. "Automatic clustering method for real-time construction simulation." Advanced Engineering Informatics 28.2 (2014): 138-152.
  • [8] Oloufa, Amr A., Masaaki Ikeda, ve Hiroshi Oda. "Situational awareness of construction equipment using GPS, wireless and web technologies." Automation in Construction 12.6 (2003): 737-748.
  • [9] Oloufa, A., Masaaki Ikeda, ve Hiroshi Oda. "GPS-based wireless collision detection of construction equipment." NIST Special Publication sp (2003): 461-466.
  • [10] Hammad, Amin, vd. "Towards the smart construction site: improving productivity and safety of construction projects using multi-agent systems, real-time simulation and automated machine control." Simulation Conference (WSC), Proceedings of the 2012 Winter. IEEE, 2012.
  • [11] ElNimr, Amr, Muaz Fagiar, ve Yasser Mohamed. "Two-way integration of 3D visualization and discrete event simulation for modeling mobile crane movement under dynamically changing site layout." Automation in Construction 68 (2016): 235-248.
  • [12] Vahdatikhaki, Faridaddin, ve Amin Hammad. "Risk-based look-ahead workspace generation for earthwork equipment using near real-time simulation." Automation in Construction 58 (2015): 207-220.
  • [13] Blackmore, B. S., ve Hans-Werner Griepentrog. "Autonomous vehicles and robots." CIGR Handbook of Agricultural Engineering. American Society of Agricultural and Biological Engineers, 2006.
  • [14] Çanakcı, Murad, ve Erdem Yıldız. "Sera Üretim Mekanizasyonunda Robotik Uygulamalar: Literatür Çalışması."
  • [15] Auernhammer, H., ve H. Speckmann. "7 Communication Issues and Internet Use." (2006): 435.
  • [16] Kyriakopoulos, K. J., ve S. G. Loizou. "2.4 Robotics: Fundamentals and Prospects." (2006): 93.
  • [17] Karan, Oğuz, H. Arsev Eraslan, ve Sefer Kurnaz. "Topografik Bilgiler ve Uydu Görüntü Verilerini Kullanarak 3 Boyutlu Alan Tanıma Sistemi." Havacılık ve Uzay Teknolojileri Dergisi: 31-40.
  • [18] Güney, Caner, ve Serdar Bora Sayın. "Jeodezik Ölçme Ve Mekansal Karar Destek İçin Robotik Bir Yaklaşım."
  • [19] Eski, İ., vd. "Otonom Sualtı Taşıtların Yörünge Kontrolü için Yapay Sinir Ağı Kontrol Sistemi Tasarımı."
  • [20] Kılıç, Ali, ve Sadettin Kapucu. "Modüler Yeniden Yapilandirilabilir Robot Modülü Omnimo’nun Tasarimi ve Üretimi." Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 31.3 (2016).
  • [21] Dadhich, Siddharth, Ulf Bodin, and Ulf Andersson. "Key challenges in automation of earth-moving machines." Automation in Construction 68 (2016): 212-222.
  • [22] Alshaer, B. J., T. T. Darabseh, and M. A. Alhanouti. "Path planning, modeling and simulation of an autonomous articulated heavy construction machine performing a loading cycle." Applied Mathematical Modelling 37.7 (2013): 5315-5325.

Development of Grading Algorithm for Autonomous Dozer

Year 2018, Volume: 6 Issue: 1, 292 - 308, 31.01.2018
https://doi.org/10.29130/dubited.349423

Abstract

In this study, a new grading algorithm is developed for the execution of grading and finishing tasks without human intervention. is developed. Maneuvers of a small scale autonomous dozer which are required for shoveling and grading operations are computed. The algorithm of grading is programmed independent of the shape of the area. Movements of the dozer blade are computed by considering the elevation of the field. Restrictions on the engine power and the applicable force by the hydraulics of the dozer were also considered when computing the movements of the blade. Area is divided into grid shaped columns and rows and movement of the dozer is computed as the grading operation is performed in the direction from south to the north. The grading algorithm can perform the grading operation autonomously, if the coordinates of the area to be graded and grade elevation are defined. A rectangular area is formed and the algorithm which autonomously performs grading operations on that area is implemented. Developed algorithm avoids excavating and grading in the upward direction. Developed grading algorithm is a significant contribution for the development of artificial intelligence for autonomous construction machines.

References

  • [1] Bettemir, Ö. H., ve Burak Tombaloğlu. "Kürüme İçin Küçük Ölçekli Otonom İş Makinesi Tasarımı ve Üretimi." Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 28.3 (2013).
  • [2] Zhong, DengHua, Ping Zhang, ve KangXin Wu. "Theory and practice of construction simulation for high rockfill dam." Science in China Series E: Technological Sciences 50 (2007): 51-61.
  • [3] Lu, Ming, vd. "Positioning and tracking construction vehicles in highly dense urban areas and building construction sites." Automation in construction 16.5 (2007): 647-656.
  • [4] Vahdatikhaki, Faridaddin, Amin Hammad, ve Hassaan Siddiqui. "Optimization-based excavator pose estimation using real-time location systems." Automation in Construction 56 (2015): 76-92.
  • [5] Hammad, Amin, Faridaddin Vahdatikhaki, ve Cheng Zhang. "A novel integrated approach to project-level automated machine control/guidance systems in construction projects." Journal of Information Technology in Construction (ITcon) 18.9 (2013): 162-181
  • [6] Jurasz, Jaroslaw, ve K. Kley. "A Cost-Effective Positioning Solution For Asphalt Rollers Based On Low-Cost DGPS Receivers." NIST SPECIAL PUBLICATION SP (2003): 403-408.
  • [7] Hung, Wei-Han, ve Shih-Chung Jessy Kang. "Automatic clustering method for real-time construction simulation." Advanced Engineering Informatics 28.2 (2014): 138-152.
  • [8] Oloufa, Amr A., Masaaki Ikeda, ve Hiroshi Oda. "Situational awareness of construction equipment using GPS, wireless and web technologies." Automation in Construction 12.6 (2003): 737-748.
  • [9] Oloufa, A., Masaaki Ikeda, ve Hiroshi Oda. "GPS-based wireless collision detection of construction equipment." NIST Special Publication sp (2003): 461-466.
  • [10] Hammad, Amin, vd. "Towards the smart construction site: improving productivity and safety of construction projects using multi-agent systems, real-time simulation and automated machine control." Simulation Conference (WSC), Proceedings of the 2012 Winter. IEEE, 2012.
  • [11] ElNimr, Amr, Muaz Fagiar, ve Yasser Mohamed. "Two-way integration of 3D visualization and discrete event simulation for modeling mobile crane movement under dynamically changing site layout." Automation in Construction 68 (2016): 235-248.
  • [12] Vahdatikhaki, Faridaddin, ve Amin Hammad. "Risk-based look-ahead workspace generation for earthwork equipment using near real-time simulation." Automation in Construction 58 (2015): 207-220.
  • [13] Blackmore, B. S., ve Hans-Werner Griepentrog. "Autonomous vehicles and robots." CIGR Handbook of Agricultural Engineering. American Society of Agricultural and Biological Engineers, 2006.
  • [14] Çanakcı, Murad, ve Erdem Yıldız. "Sera Üretim Mekanizasyonunda Robotik Uygulamalar: Literatür Çalışması."
  • [15] Auernhammer, H., ve H. Speckmann. "7 Communication Issues and Internet Use." (2006): 435.
  • [16] Kyriakopoulos, K. J., ve S. G. Loizou. "2.4 Robotics: Fundamentals and Prospects." (2006): 93.
  • [17] Karan, Oğuz, H. Arsev Eraslan, ve Sefer Kurnaz. "Topografik Bilgiler ve Uydu Görüntü Verilerini Kullanarak 3 Boyutlu Alan Tanıma Sistemi." Havacılık ve Uzay Teknolojileri Dergisi: 31-40.
  • [18] Güney, Caner, ve Serdar Bora Sayın. "Jeodezik Ölçme Ve Mekansal Karar Destek İçin Robotik Bir Yaklaşım."
  • [19] Eski, İ., vd. "Otonom Sualtı Taşıtların Yörünge Kontrolü için Yapay Sinir Ağı Kontrol Sistemi Tasarımı."
  • [20] Kılıç, Ali, ve Sadettin Kapucu. "Modüler Yeniden Yapilandirilabilir Robot Modülü Omnimo’nun Tasarimi ve Üretimi." Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 31.3 (2016).
  • [21] Dadhich, Siddharth, Ulf Bodin, and Ulf Andersson. "Key challenges in automation of earth-moving machines." Automation in Construction 68 (2016): 212-222.
  • [22] Alshaer, B. J., T. T. Darabseh, and M. A. Alhanouti. "Path planning, modeling and simulation of an autonomous articulated heavy construction machine performing a loading cycle." Applied Mathematical Modelling 37.7 (2013): 5315-5325.
There are 22 citations in total.

Details

Primary Language Turkish
Subjects Engineering
Journal Section Articles
Authors

Adem Yıldırım This is me

Önder Halis Bettemir

Publication Date January 31, 2018
Published in Issue Year 2018 Volume: 6 Issue: 1

Cite

APA Yıldırım, A., & Bettemir, Ö. H. (2018). Otonom Dozer için Küreme Algoritması Geliştirilmesi. Düzce Üniversitesi Bilim Ve Teknoloji Dergisi, 6(1), 292-308. https://doi.org/10.29130/dubited.349423
AMA Yıldırım A, Bettemir ÖH. Otonom Dozer için Küreme Algoritması Geliştirilmesi. DUBİTED. January 2018;6(1):292-308. doi:10.29130/dubited.349423
Chicago Yıldırım, Adem, and Önder Halis Bettemir. “Otonom Dozer için Küreme Algoritması Geliştirilmesi”. Düzce Üniversitesi Bilim Ve Teknoloji Dergisi 6, no. 1 (January 2018): 292-308. https://doi.org/10.29130/dubited.349423.
EndNote Yıldırım A, Bettemir ÖH (January 1, 2018) Otonom Dozer için Küreme Algoritması Geliştirilmesi. Düzce Üniversitesi Bilim ve Teknoloji Dergisi 6 1 292–308.
IEEE A. Yıldırım and Ö. H. Bettemir, “Otonom Dozer için Küreme Algoritması Geliştirilmesi”, DUBİTED, vol. 6, no. 1, pp. 292–308, 2018, doi: 10.29130/dubited.349423.
ISNAD Yıldırım, Adem - Bettemir, Önder Halis. “Otonom Dozer için Küreme Algoritması Geliştirilmesi”. Düzce Üniversitesi Bilim ve Teknoloji Dergisi 6/1 (January 2018), 292-308. https://doi.org/10.29130/dubited.349423.
JAMA Yıldırım A, Bettemir ÖH. Otonom Dozer için Küreme Algoritması Geliştirilmesi. DUBİTED. 2018;6:292–308.
MLA Yıldırım, Adem and Önder Halis Bettemir. “Otonom Dozer için Küreme Algoritması Geliştirilmesi”. Düzce Üniversitesi Bilim Ve Teknoloji Dergisi, vol. 6, no. 1, 2018, pp. 292-08, doi:10.29130/dubited.349423.
Vancouver Yıldırım A, Bettemir ÖH. Otonom Dozer için Küreme Algoritması Geliştirilmesi. DUBİTED. 2018;6(1):292-308.