ELECTROLESS NICKEL PLATING ON ABS PLASTIC BY USING ENVIRONMENTALLY FRIENDLY CHEMICALS

Yıl 2017, Sayı: 1, 1 - 8, 09.11.2017

Canan Uraz

Öz

In this study, electroless nickel (EN) plating on
acrylonitrile butadiene styrene (ABS) engineering plastic by using
environmentally friendly chemicals were studied. Electroless plating is a
fundamental step in the metal plating on the plastic. This step makes the
plastic conductive and makes it possible to a homogeneous and hard plating
without using any hazardous and unfriendly chemical such as palladium, tin,
etc. In the industry there are many distinct chemical materials both catalysts
and activation solutions for the electroless bath which is one of the most
important parts of the process. In this study the effects of plating bath
compositions, plating time and sand paper size were investigated on electroless
nickel plating. Experiments were carried out with 400, 800, 1500 grit sandpaper
by applying sand attrition process and at 75°C, 85°C, and 95°C bath
temperatures with 20, 40, 60 minutes of deposition time. The surface morphology
and the amount of deposit analysis were performed by Fischerscope X-Ray XDL-B
System, X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). Due to
the results of experiments and analysis, the nickel plating on ABS plastic was
succeeded with two different bath compositions. According to the results, the
best plating on ABS plastic was obtained at maximum plating thickness as 2.47
μm with plating time as 60 min and at 95°C plating bath temperature by
using 1500 grit sandpaper. Nickel plating was better with Bath 1 (6.2 μm) than
Bath 2 (1.42 μm) on activated surfaces of ABS which were activated with 1500
grit sandpaper.

Anahtar Kelimeler

ABS plastic, nickel plating, electroless plating

Kaynakça

• “ABS”, http://www.steinwall.com/wp-content/uploads/2016/05/Acrylonitrile-Butadiene-Styrene-ABS.pdf " Electroplating ", https://nzic.org.nz/ChemProcesses/metals/8G.pdf " Plating ", https://en.wikipedia.org/wiki/Plating Rajaguru J.C., C. Au, Duke M., (2012). Study of electroless nickel plating on PerFactoryTM rapid prototype model. Journal of Achievements in Materials and Manufacturing Engineering. 55: 782-789. Schlesinger M, (2010), Electroless deposition of nickel. Modern Electroplating. 447-458. Sudagar, Jothi; Lian, Jianshe; Sha, Wei (2013). Electroless nickel, alloy,composite and nano coatings - A critical review. Journal of Alloys and Compounds. 571: 183–204. Tang XJ, Bi CI, Han CG, Zhang BG (2009). A new palladium-free surface activation process for Ni electroless plating on ABS plastic. Materials Letters 63. 840-842.