INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4

Ahmet Yönetken

INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4

Yıl 2015, Cilt: 28 Sayı: 3, 419 - 424, 05.10.2015

Öz

The microstructure, dielectric properties and electrical characteristics of Ni plated Si₃N₄ powders were investigated using specimens produced by tube furnace sintering at 800-1200°C temperature. A uniform nickel layer on Si₃N₄powders was deposited prior to sintering using electroless plating technique. A composite consisting of binary additions, a metallic phase, Ni within a matrix of Ni has been prepared under Ar shroud and then tube furnace sintered. XRD, SEM (Scanning Electron Microscope), Empedans Phase Analyzer were used to obtain structural data and to determine electrical properties such as dielectric and conductivity at the temperature range of 25-400C. The ferromagnetic resonance varied from 10 Hz to 1 GHz and measurements were employed to characterize the properties of the specimens. Experimental results carried out for composition (33Si₃N₄)66Ni at 1200°C suggest that the best properties as 75,81HB and permittivity were obtained at 1200°C

Anahtar Kelimeler

Powder metallurgy, electroless plating, electrical proporties

Kaynakça

G.O. Mallory, J.B. Hajdu, Electroless Plating: Fundamentals and Applications, AESF, Orlando, 1991.
Metzger, Th Florian, Trans. Inst. Met. Finish. 54 (1976) 174.
S.S. Tulsi, Finishing 7(11) (1983) 14.
J. Lukschandel, Trans. Inst. Met. Finish. 56(3) (1978) 118.
Poper P.. Ruddlesden S.N.. Trans. br. ceram. soc.. 60 (1961). 603.
Zıegler G.. Heınrıch J.. Wöttıng G.. J. Mater. Sci.. 22 (1987). 3041.
Guge E.. Woettıng G.. Ind. Cer.. 19 (1999). 196.
G.O. Mallory. J.B. Hajdu. Electroless Plating: Fundamentals Orlando.1991. AESF.
Metzger. Th Florian. Trans. Inst. Met. Finish. 54 (1976) 174.
J. Lukschandel. Trans. Inst. Met. Finish. 56(3) (1978) 118.
Z. Abdel Hamid. S.A. El Badry. A. Abdel Aal. Surf. Coat. Technol. 201(2007) 5948.
J. Novakovic. P. Vassiliou. Kl. Samara. Th. Argyropoulos Surf. Coat. Technol. 201(3-4) (2006)895.
M. Sarret. C. Muller. A. Amell. Surf. Coat. Tech. 201 (1-2) (2006) 389.
Int. J. Electrochem. Sci.. Vol. 2. 2007
I. Apachitei. F.D. Tichelaar. J. Duszczyk. L. Katgerman. Surf. Coat. Technol. 149 (2002) 263
Trojanová Z.. Lukáˇc P.. Ferkel H.and Riehemann W.. 2004. “Internal Friction in Microcrystalline and Nanocrystalline Mg”. Materials Science and Engineering A 370. P154-157.
Erol A.. Yönetken A.. ‘MW sintering ‘the economic way’ to ceramic reinforced nickel aluminide composites’ . Metal Powder Report. 2009 Vol 64. page 18-25

Yıl 2015, Cilt: 28 Sayı: 3, 419 - 424, 05.10.2015

Ahmet Yönetken

Öz

Kaynakça

G.O. Mallory, J.B. Hajdu, Electroless Plating: Fundamentals and Applications, AESF, Orlando, 1991.
Metzger, Th Florian, Trans. Inst. Met. Finish. 54 (1976) 174.
S.S. Tulsi, Finishing 7(11) (1983) 14.
J. Lukschandel, Trans. Inst. Met. Finish. 56(3) (1978) 118.
Poper P.. Ruddlesden S.N.. Trans. br. ceram. soc.. 60 (1961). 603.
Zıegler G.. Heınrıch J.. Wöttıng G.. J. Mater. Sci.. 22 (1987). 3041.
Guge E.. Woettıng G.. Ind. Cer.. 19 (1999). 196.
G.O. Mallory. J.B. Hajdu. Electroless Plating: Fundamentals Orlando.1991. AESF.
Metzger. Th Florian. Trans. Inst. Met. Finish. 54 (1976) 174.
J. Lukschandel. Trans. Inst. Met. Finish. 56(3) (1978) 118.
Z. Abdel Hamid. S.A. El Badry. A. Abdel Aal. Surf. Coat. Technol. 201(2007) 5948.
J. Novakovic. P. Vassiliou. Kl. Samara. Th. Argyropoulos Surf. Coat. Technol. 201(3-4) (2006)895.
M. Sarret. C. Muller. A. Amell. Surf. Coat. Tech. 201 (1-2) (2006) 389.
Int. J. Electrochem. Sci.. Vol. 2. 2007
I. Apachitei. F.D. Tichelaar. J. Duszczyk. L. Katgerman. Surf. Coat. Technol. 149 (2002) 263
Trojanová Z.. Lukáˇc P.. Ferkel H.and Riehemann W.. 2004. “Internal Friction in Microcrystalline and Nanocrystalline Mg”. Materials Science and Engineering A 370. P154-157.
Erol A.. Yönetken A.. ‘MW sintering ‘the economic way’ to ceramic reinforced nickel aluminide composites’ . Metal Powder Report. 2009 Vol 64. page 18-25

Toplam 17 adet kaynakça vardır.

Ayrıntılar

Birincil Dil	İngilizce
Bölüm	Mechanical Engineering
Yazarlar	Ahmet Yönetken
Yayımlanma Tarihi	5 Ekim 2015
Yayımlandığı Sayı	Yıl 2015 Cilt: 28 Sayı: 3

Kaynak Göster

APA	Yönetken, A. (2015). INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4. Gazi University Journal of Science, 28(3), 419-424.
AMA	Yönetken A. INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4. Gazi University Journal of Science. Ekim 2015;28(3):419-424.
Chicago	Yönetken, Ahmet. “INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4”. Gazi University Journal of Science 28, sy. 3 (Ekim 2015): 419-24.
EndNote	Yönetken A (01 Ekim 2015) INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4. Gazi University Journal of Science 28 3 419–424.
IEEE	A. Yönetken, “INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4”, Gazi University Journal of Science, c. 28, sy. 3, ss. 419–424, 2015.
ISNAD	Yönetken, Ahmet. “INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4”. Gazi University Journal of Science 28/3 (Ekim 2015), 419-424.
JAMA	Yönetken A. INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4. Gazi University Journal of Science. 2015;28:419–424.
MLA	Yönetken, Ahmet. “INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4”. Gazi University Journal of Science, c. 28, sy. 3, 2015, ss. 419-24.
Vancouver	Yönetken A. INVESTIGATION OF ELECTRICAL CHARACTERISTICS OF COMPOSITES PRODUCED BY ELECTROLESS Ni PLATING OF Si3N4. Gazi University Journal of Science. 2015;28(3):419-24.