Araştırma Makalesi
BibTex RIS Kaynak Göster

PRODUCTION OF LONG GEOMETRIC PARTS WITH 3D PRINTERS

Yıl 2019, Cilt: 3 Sayı: 1, 11 - 18, 30.04.2019

Öz

In this study, it is
searched that the 3D printer can produce the parts with longer geometry than
the printing area of ​​standard 3D printers. The solid model of the long
workpiece to be produced is sliced ​​in computer-aided design programs and the
production of separate code is provided for each slice, and the production of
these pieces is realized end to end and the piece is obtained. It was observed
that the obtained piece was resistant.

Kaynakça

  • Kaya G., Çetinkaya K., “Vidalı Transfer Sistemlerine Sahip Kartezyen Tipi 3B Yazıcılarda Gıda Malzemesi Yazdırma Parametrelerinin Karşılaştırılması”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (16-24). Antalya, 2017
  • Huri P., (2017), “3D Biyobaskı İle Anatomik Şekilli Kemik Dokusu Üretimi”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (60-62). Antalya, 2017
  • Aydın K., Gök A., Gül F., “Mühendislik Eğitimi İçin Malzeme Kristal Kafes Yapılarının Modellenmesi Ve 3 Boyutlu Baskısı”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (109-118). Antalya, 2017.
  • Şahin A., Şahin T., Gökçe H., Eren O., “Hasarlı Dişlilerin Tersine Mühendislik Yaklaşımıyla Yeniden Oluşturulması”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (126-134), Antalya, 2017.
  • Godoi F.C., Prakash S., Bhandari B.R.,”3d printing technologies applied for food design: Status and prospects”, Journal of Food Engineering 179 (2016) 44e54
  • Biswas P. , Mamatha S., Naskar S., Rao Y.S., Johnson R., Padmanabham G., “3D extrusion printing of magnesium aluminate spinel ceramic parts using thermally induced gelation of methyl cellulose”, Journal of Alloys and Compounds 770 (2019) 419e423
  • Chen Z., Li Z. , Li J., Liu C., Lao C., Fu Y., Liu C., Li Y., Wang P., He Y., “3D printing of ceramics: A review”, Journal of the European Ceramic Society 39 (2019) 661–687
  • Maleksaeedi S., Eng H., Wiria F. E., Ha T.M.H., He Z., “Property enhancement of 3D-printed alumina ceramics using vacuumin filtration”, Journal of Materials Processing Technology 214 (2014) 1301–1306
  • Mamatha S., Biswas P., Ramavath P., Das D., Johnson R., “3D printing of complex shaped alumina parts”, Ceramics International 44 (2018) 19278–19281
  • Satyanarayana B., Prakash K. J., “Component Replication using 3D Printing Technology”, Procedia Materials Science 10 ( 2015 ) 263 – 269
  • Sathish T., Vijayakumar M. D., Ayyangar A. K., “Design and Fabrication of Industrial Components Using 3D Printing”,Materials Today: Proceedings 5 (2018) 14489–14498
  • Awad A., Trenfield S. J., Gaisford S.,. Basit A.W., “3D printed medicines: A new branch of digital healthcare”, International Journal of Pharmaceutics 548 (2018) 586–596
  • https://www.voxeljet.com/3d-drucksysteme/vx4000/ (erişim tarihi: 09.04.2019)
  • http://www.sciaky.com/additive-manufacturing/metal-additive-manufacturing-systems (erişim tarihi: 09.04.2019)
  • http://wwwassets.e-ci.com/PDF/Products/baam-fact-sheet.pdf (erişim tarihi: 09.04.2019)
  • https://www.matterhackers.com/articles/printing-outside-the-box-exceeding-the-build-volume-of-your-printer (erişim tarihi: 09.04.2019)
  • Gök A.,“AutoCAD 2006” , (191-194), Seçkin Yayıncılık, Ankara, 2006.

3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ

Yıl 2019, Cilt: 3 Sayı: 1, 11 - 18, 30.04.2019

Öz




Bu çalışmada standart
3B yazıcıların baskı alanına göre daha uzun geometriye sahip parçaların 3B
yazıcı ile üretilebilirliği araştırılmıştır. Üretilecek uzun iş parçasına ait
katı model, bilgisayar destekli tasarım programlarında dilimlenerek her bir
dilim için ayrı kod üretimi sağlanmış ve bu parçaların üretimleri uç uca
gerçekleştirilerek yekpare parça elde edilmiştir. Elde edilen parçanın
mukavemetli olduğu gözlenmiştir.




Kaynakça

  • Kaya G., Çetinkaya K., “Vidalı Transfer Sistemlerine Sahip Kartezyen Tipi 3B Yazıcılarda Gıda Malzemesi Yazdırma Parametrelerinin Karşılaştırılması”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (16-24). Antalya, 2017
  • Huri P., (2017), “3D Biyobaskı İle Anatomik Şekilli Kemik Dokusu Üretimi”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (60-62). Antalya, 2017
  • Aydın K., Gök A., Gül F., “Mühendislik Eğitimi İçin Malzeme Kristal Kafes Yapılarının Modellenmesi Ve 3 Boyutlu Baskısı”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (109-118). Antalya, 2017.
  • Şahin A., Şahin T., Gökçe H., Eren O., “Hasarlı Dişlilerin Tersine Mühendislik Yaklaşımıyla Yeniden Oluşturulması”, 3B Baskı Teknolojileri Uluslararası Sempozyumu (3b-Bts2017), (126-134), Antalya, 2017.
  • Godoi F.C., Prakash S., Bhandari B.R.,”3d printing technologies applied for food design: Status and prospects”, Journal of Food Engineering 179 (2016) 44e54
  • Biswas P. , Mamatha S., Naskar S., Rao Y.S., Johnson R., Padmanabham G., “3D extrusion printing of magnesium aluminate spinel ceramic parts using thermally induced gelation of methyl cellulose”, Journal of Alloys and Compounds 770 (2019) 419e423
  • Chen Z., Li Z. , Li J., Liu C., Lao C., Fu Y., Liu C., Li Y., Wang P., He Y., “3D printing of ceramics: A review”, Journal of the European Ceramic Society 39 (2019) 661–687
  • Maleksaeedi S., Eng H., Wiria F. E., Ha T.M.H., He Z., “Property enhancement of 3D-printed alumina ceramics using vacuumin filtration”, Journal of Materials Processing Technology 214 (2014) 1301–1306
  • Mamatha S., Biswas P., Ramavath P., Das D., Johnson R., “3D printing of complex shaped alumina parts”, Ceramics International 44 (2018) 19278–19281
  • Satyanarayana B., Prakash K. J., “Component Replication using 3D Printing Technology”, Procedia Materials Science 10 ( 2015 ) 263 – 269
  • Sathish T., Vijayakumar M. D., Ayyangar A. K., “Design and Fabrication of Industrial Components Using 3D Printing”,Materials Today: Proceedings 5 (2018) 14489–14498
  • Awad A., Trenfield S. J., Gaisford S.,. Basit A.W., “3D printed medicines: A new branch of digital healthcare”, International Journal of Pharmaceutics 548 (2018) 586–596
  • https://www.voxeljet.com/3d-drucksysteme/vx4000/ (erişim tarihi: 09.04.2019)
  • http://www.sciaky.com/additive-manufacturing/metal-additive-manufacturing-systems (erişim tarihi: 09.04.2019)
  • http://wwwassets.e-ci.com/PDF/Products/baam-fact-sheet.pdf (erişim tarihi: 09.04.2019)
  • https://www.matterhackers.com/articles/printing-outside-the-box-exceeding-the-build-volume-of-your-printer (erişim tarihi: 09.04.2019)
  • Gök A.,“AutoCAD 2006” , (191-194), Seçkin Yayıncılık, Ankara, 2006.
Toplam 17 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Biyomateryaller, Makine Mühendisliği
Bölüm Araştırma Makalesi
Yazarlar

Ahmet Köbeloğlu 0000-0003-3813-2204

Kerim Çetinkaya

Yayımlanma Tarihi 30 Nisan 2019
Gönderilme Tarihi 10 Nisan 2019
Yayımlandığı Sayı Yıl 2019 Cilt: 3 Sayı: 1

Kaynak Göster

APA Köbeloğlu, A., & Çetinkaya, K. (2019). 3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ. International Journal of 3D Printing Technologies and Digital Industry, 3(1), 11-18.
AMA Köbeloğlu A, Çetinkaya K. 3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ. IJ3DPTDI. Nisan 2019;3(1):11-18.
Chicago Köbeloğlu, Ahmet, ve Kerim Çetinkaya. “3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ”. International Journal of 3D Printing Technologies and Digital Industry 3, sy. 1 (Nisan 2019): 11-18.
EndNote Köbeloğlu A, Çetinkaya K (01 Nisan 2019) 3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ. International Journal of 3D Printing Technologies and Digital Industry 3 1 11–18.
IEEE A. Köbeloğlu ve K. Çetinkaya, “3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ”, IJ3DPTDI, c. 3, sy. 1, ss. 11–18, 2019.
ISNAD Köbeloğlu, Ahmet - Çetinkaya, Kerim. “3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ”. International Journal of 3D Printing Technologies and Digital Industry 3/1 (Nisan 2019), 11-18.
JAMA Köbeloğlu A, Çetinkaya K. 3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ. IJ3DPTDI. 2019;3:11–18.
MLA Köbeloğlu, Ahmet ve Kerim Çetinkaya. “3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ”. International Journal of 3D Printing Technologies and Digital Industry, c. 3, sy. 1, 2019, ss. 11-18.
Vancouver Köbeloğlu A, Çetinkaya K. 3B YAZICILAR İLE UZUN GEOMETRİLİ PARÇALARIN ÜRETİLEBİLİRLİĞİ. IJ3DPTDI. 2019;3(1):11-8.

 download

Uluslararası 3B Yazıcı Teknolojileri ve Dijital Endüstri Dergisi Creative Commons Atıf-GayriTicari 4.0 Uluslararası Lisansı ile lisanslanmıştır.