Large Deflection Static Analysis of A Cantilever Beam Subjected to A Point Load

Yıl 2010, Cilt: 2 Sayı: 4, 1 - 13, 01.12.2010

T. Kocatürk Ş. D. Akbaş M. Şimşek

Öz

This work presents geometrically non-linear static analysis of a cantilever beam subjected to a non-follower transversal point load at the free end of the beam. The material of the beam is assumed as isotropic and hyperelastic. In this study, finite element model of the beam is constructed by using total Lagrangian finite element model of two dimensional continua for a twelve-node quadratic element. The considered highly nonlinear problem is solved by using incremental displacement-based finite element method in connection with Newton-Raphson iteration method. In the study, the effect of the large deflections and rotations on the displacements and the normal stress and the shear stress distributions through the thickness of the beam is investigated in detail. With the variation of the ratio of Lenght/height, the results of the total Lagrangian finite element model of two dimensional continua for a twelve-node quadratic element are compared with the results of SAP2000 packet program. Also, a few of the obtained results are compared with the previously published results. Numerical results indicate that with decrease the of ratio of lenght/height, using the total Lagrangian finite element model of two dimensional continua plays very important role in the static responses of the beam in geometrically non-linear static analysis

Anahtar Kelimeler

Cantilever Beam, Non-linear Finite Element Analysis, Large Displacements, Large Rotations

Kaynakça

• [1] Chucheepsakul S, Buncharoen S, Wang CM., Large deflection of beams under moment gradient. Journal of Engineering Mechanics-ASCE, 120(9),1848-1860, 1994
• [2] Chucheepsakul S, Buncharoen S, Huang ST., Elastica of a simple variable-arc-length beam subjected to an end moment. Journal of Engineering Mechanics-ASCE,121(7), 767- 772,1995.
• [3] Wang CM, Lam KY, He XQ, Chucheepsakul S., Large deflections of an end supported beam subjected to a point load. International Journal of Non-Linear Mechanics, 32(1), 63- 72,1997.
• [4] He XQ, Wang CM, Lam KY, Analytical bending solutions of elastica with one end held while the other end portion slides on a friction support. Archive of Applied Mechanics, 67, 543-554,1997.
• [5] Kapania RK, Li JA., Formulation and implementation of geometrically exact curved beam elements incorporating finite strains and finite rotations. Computational Mechanics, 30, 444- 459, 2003.
• [6] Pulngern, T., Chucheepsakul, S., Halling, M.W., Large deflections of variable-arc-length beams under uniform self weight: Analytical and experimental”, Structural Engineering and Mechanics, 19 (4), 413-423, 2005.
• [7] Al-Sadder A, Al-Rawi RAO., Finite difference scheme for large-deflection analysis of non-prismatic cantilever beams subjected to different types of continuous and discontinuous loadings. Archive of Applied Mechanics, 75, 459-473, 2006.
• [8] Li SR, Zhou YH., Post-buckling of a hinged-fixed beam under uniformly distributed follower forces. Mechanics Research Communications, 32, 359-367,2005.
• [9] AL-Sadder, Othman, R.A, Shatnawi, A.S., A simple finite element formulation for large deflection analysis of nonprismatic slender beams, Structural Engineering and Mechanics, 24 (6), 647-664, 2006.
• [10] Reddy JN., An introduction to non-linear finite element analysis, New York, Oxford University Press Inc., 2004.
• [11] Banerjee A, Bhattacharya B, Mallik AK., Large deflection of cantilever beams with geometric non-linearity: Analytical and numerical approaches. International Journal of NonLinear Mechanics, 43, 366-376, 2008.
• [12] Shvartsman BS., Direct method for analysis of flexible cantilever beam subjected to two follower forces. International Journal of Non-Linear Mechanics, 44, 249-252, 2009.
• [13] M. Brojan, T. Videnic, F. Kosel. Large deflections of nonlinearly elastic non-prismatic cantilever beams made from materials obeying the generalized Ludwick constitutive law. Meccanica, 44, 733-739, 2009.
• [14] Nallathambi A. K., Rao C. L., Srinivasan M. S., Large deflection of constant curvature cantilever beam under follower load. International Journal of Mechanical Sciences 52, 440– 445, 2010.
• [15] Vaz M.A.,Caire M., On the large deflections of linear viscoelastic beams. International Journal of Mechanical Sciences , 45, 75–81, 2010.
• [16] Akbaş Ş. D., Konsol bir kirişin geometrik lineer olmayan statik incelenmesi (Geometrically non-linear static analysis of a cantilever beam), MSc Thesis, Institute of Science at Yildiz Technical University (İstanbul), 2009.
• [17] Akbaş Ş. D., Kocatürk T., Hiperelastik malzemeden yapılmış basit kirişlerin geometrik lineer olmayan statik analzi (Geometrically non-linear static analysis of simply supported beams made of hyperelastic material). XVI. Turkish National Mechanic Congress, Kayseri, Turkey, pp. 115-125, 2009.
• [18] Kocatürk T, Akbaş Ş. D., Geometrically non-linear static analysis of a simply supported beam made of hyperelastic material. Structural Engineering and Mechanics, (In press), 2010.
• [19] O.C. Zienkiewichz, R.L. Taylor, The finite element method, Fifth Edition, Volume 2: Solid Mechanics, Oxford: Butterworth-Heinemann, 2000.
• [20] CSI Computers & Structures Inc. , SAP2000-Version 14 Three Dimensional Static and Dynamic Finite Element Analysis and Design of Structures, Berkeley (CA, USA), Computers & Structures Inc.; 2009.
• [21] Fertis DG., Nonlinear Mechanics, 2nd edition, CRC Press, 1999.