BibTex RIS Kaynak Göster

Aerodynamic Numerical Testing of Megawatt Wind Turbine Blade to Find Optimum Angle of Attack

Yıl 2015, Cilt: 7 Sayı: 4, 1 - 9, 01.12.2015
https://doi.org/10.24107/ijeas.251260

Öz

Wind energy is one of the oldest kinds of energy source used by mankind and it is dating back to thousand years. At the beginning of twentieth century, multi blades wind turbines were improved and used for charging in USA. After oil crisis in in the seventies, there was a surge of alternative energy sources in USA, Denmark and Germany. In terms of installed capacity, Germany had the leadership until 2007, then it passed to USA and finally China becomes the leader. Today, 6 MW capacity wind turbine are available in the market. The majority of the airfoils in use on horizontal-axis wind turbines today were originally developed for aircraft but it has been begun to design airfoil especially for wind turbine for 20 years. S series airfoil poses the most significant examples designed by NREL. In this study, S809 airfoil was simulated using the SST turbulence model and compared with experimental data to validate simulation accuracy of the computational fluid dynamics and this calculation. After verifying the consistency of the simulation model, S830 airfoil was simulated with different Reynolds numbers or velocities. Lift and drag coefficient, lift to drag ratio and pressure coefficient were calculated and compared

Kaynakça

  • [1] Sayed, M.A., Kandil, H.A., Shaltot, A., Aerodynamic analysis of different wind-turbine-blade profiles using finite-volume method, Energy Conversion and Management 64,541–550, 2012.
  • [2] Gul, M., Uzol, O., Akmandor, I.S. An Experimental Study on Active Flow Control Using Synthetic Jet Actuators over S809 Airfoil, Journal of Physics: Conference Series 524-012101, 2014.
  • [3] Sogukpinar, H., Bozkurt, I. Calculation of Optimum Angle of Attack to Determine Maximum Lift to Drag Ratio of NACA 632-215 Airfoil. Journal of Multidisciplinary Engineering Science and Technology Vol. 2, 1103-1108, 2015.
  • [4] Thumthae, C., Chitsomboon, T., Optimal angle of attack for untwisted blade wind türbine. Renewable Energy 34, 1279–1284, 2009.
  • [5] Wolfe, P.W., Ochs, S.S. CFD Calculations of S809 Aerodynamic Characteristics, AIAA, 97- 0973, 2015.
  • [6] COMSOL CFD, Module user guide. http://www.comsol.com, 2015.
Yıl 2015, Cilt: 7 Sayı: 4, 1 - 9, 01.12.2015
https://doi.org/10.24107/ijeas.251260

Öz

Kaynakça

  • [1] Sayed, M.A., Kandil, H.A., Shaltot, A., Aerodynamic analysis of different wind-turbine-blade profiles using finite-volume method, Energy Conversion and Management 64,541–550, 2012.
  • [2] Gul, M., Uzol, O., Akmandor, I.S. An Experimental Study on Active Flow Control Using Synthetic Jet Actuators over S809 Airfoil, Journal of Physics: Conference Series 524-012101, 2014.
  • [3] Sogukpinar, H., Bozkurt, I. Calculation of Optimum Angle of Attack to Determine Maximum Lift to Drag Ratio of NACA 632-215 Airfoil. Journal of Multidisciplinary Engineering Science and Technology Vol. 2, 1103-1108, 2015.
  • [4] Thumthae, C., Chitsomboon, T., Optimal angle of attack for untwisted blade wind türbine. Renewable Energy 34, 1279–1284, 2009.
  • [5] Wolfe, P.W., Ochs, S.S. CFD Calculations of S809 Aerodynamic Characteristics, AIAA, 97- 0973, 2015.
  • [6] COMSOL CFD, Module user guide. http://www.comsol.com, 2015.
Toplam 6 adet kaynakça vardır.

Ayrıntılar

Konular Mühendislik
Diğer ID JA66EN63TV
Bölüm Makaleler
Yazarlar

H. Sogukpinar Bu kişi benim

İ. Bozkurt Bu kişi benim

M. Pala Bu kişi benim

H. Turkmenler Bu kişi benim

Yayımlanma Tarihi 1 Aralık 2015
Yayımlandığı Sayı Yıl 2015 Cilt: 7 Sayı: 4

Kaynak Göster

APA Sogukpinar, H., Bozkurt, İ., Pala, M., Turkmenler, H. (2015). Aerodynamic Numerical Testing of Megawatt Wind Turbine Blade to Find Optimum Angle of Attack. International Journal of Engineering and Applied Sciences, 7(4), 1-9. https://doi.org/10.24107/ijeas.251260
AMA Sogukpinar H, Bozkurt İ, Pala M, Turkmenler H. Aerodynamic Numerical Testing of Megawatt Wind Turbine Blade to Find Optimum Angle of Attack. IJEAS. Aralık 2015;7(4):1-9. doi:10.24107/ijeas.251260
Chicago Sogukpinar, H., İ. Bozkurt, M. Pala, ve H. Turkmenler. “Aerodynamic Numerical Testing of Megawatt Wind Turbine Blade to Find Optimum Angle of Attack”. International Journal of Engineering and Applied Sciences 7, sy. 4 (Aralık 2015): 1-9. https://doi.org/10.24107/ijeas.251260.
EndNote Sogukpinar H, Bozkurt İ, Pala M, Turkmenler H (01 Aralık 2015) Aerodynamic Numerical Testing of Megawatt Wind Turbine Blade to Find Optimum Angle of Attack. International Journal of Engineering and Applied Sciences 7 4 1–9.
IEEE H. Sogukpinar, İ. Bozkurt, M. Pala, ve H. Turkmenler, “Aerodynamic Numerical Testing of Megawatt Wind Turbine Blade to Find Optimum Angle of Attack”, IJEAS, c. 7, sy. 4, ss. 1–9, 2015, doi: 10.24107/ijeas.251260.
ISNAD Sogukpinar, H. vd. “Aerodynamic Numerical Testing of Megawatt Wind Turbine Blade to Find Optimum Angle of Attack”. International Journal of Engineering and Applied Sciences 7/4 (Aralık 2015), 1-9. https://doi.org/10.24107/ijeas.251260.
JAMA Sogukpinar H, Bozkurt İ, Pala M, Turkmenler H. Aerodynamic Numerical Testing of Megawatt Wind Turbine Blade to Find Optimum Angle of Attack. IJEAS. 2015;7:1–9.
MLA Sogukpinar, H. vd. “Aerodynamic Numerical Testing of Megawatt Wind Turbine Blade to Find Optimum Angle of Attack”. International Journal of Engineering and Applied Sciences, c. 7, sy. 4, 2015, ss. 1-9, doi:10.24107/ijeas.251260.
Vancouver Sogukpinar H, Bozkurt İ, Pala M, Turkmenler H. Aerodynamic Numerical Testing of Megawatt Wind Turbine Blade to Find Optimum Angle of Attack. IJEAS. 2015;7(4):1-9.

21357download