Araştırma Makalesi
Yıl 2018,
Cilt: 10 Sayı: 2, 64 - 72, 15.08.2018
Öz
In the
present study, a numerical model for wheel-snow interaction ispresented using
finite element method. For this aim, the model of tire is designed using
SolidWorks and ANSYS Design modeler. The analyses of the prepared models are
performed using ANSYS Explicit Dynamics considering Mooney- Rivilin tire model.
Frictional relationship between wheel and snow ground was established and snow
erosion is considered as linear, in the analyses. To
validate the results, a comparison is carried out with available results. Six different mesh sizes are considered in the
study, the effect of mesh sizing and mesh number on the accuracy of the
obtained results and solution time is discussed. Finally, it is concluded that models
with 0.025 m and 0.02 m mesh sizes give more accurate
results than the others and a strong linear proportion exists between the
number of iteration and the mesh size.
Anahtar Kelimeler
Kaynakça
- Jafarzadyeganeh, M.,Modeling and developing a new generation tire chain with finite element analysis (FEA), Institute Of Natural And Applied Sciences, MSc.Thesis, Isparta, 2017.
- Danielson, K.T., Noor, A.K., Green, J.S., Computational strategies for tire modeling and analysis, Computers & Structures, 4, 673-693, 1996.
- Mousseau, C.W., Hulbert, G.M., An efficient tire model for analaysis of spindle forces produced by a tire impacting large obstacles, Computer Methods in Applied Mechanics and Engineering, 135, 15-34, 1996.
- Xiangquiao Y., Non-linear three-dimensional finite element modeling of radial tires, Mathematics and computers in simulation, 58, 51–70, 2001.
- Lee, J.H. Finite element modeling of interfacial forces and contact stresses of pneumatic tire on fresh snow for combined longitudinal and lateral slips, Elsevier, Journal of Terramechanics, 48, 171-197, 2011.
- Cho, J.R., Numerical estimation of rolling resistance and temperature distribution of 3-D periodic patterned tire, International Journal of Solids and Structures, 50, 86-96, 2013.
- Wei, C., Olatunbosun, O.A., Transient dynamic behaviour of finite element tire traversing obstacles with different heights, Journal of Terramechanics, 1-16, 2014.
- Katz, A., Sankaran, V., Mesh quality effects on the accuracy of cfd solutions on unstructured meshes, 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Aerospace Sciences Meetings, 4 - 7 January 2011,
- Hou, C.Y., Development of a varying mesh scheme for finite element crack closure analysis, Engineering Fracture Mechanics, 148, 42-59, 2015.
- Tigdemir M., Jafarzadyeganeh M., Avcar M., Finite element modelling of wheel on the snow. 4th international conference on computational and experimental science and engineering, 1, 452, 2017.
- Yan, X., Non-linear three-dimensional finite element modeling of radial tires, Mathematics and Computers in Simulation, 58(1), 51–70, 2001.
- Borstad, C.P., McClung, D.M., Numerical modeling of tensile fracture initiation and propagation in snow slabs using nonlocal damage mechanics, Cold Regions Science and Technology, 69(2-3), 145-155, 2011
- Krmela, J., Krmelová, Replacement of Belt Structure for FEA of Tire, Procedia Engineering, 132-136, 2016.
- ANSYS, 2016. Academic Student Engineering Simulation Software.
Yıl 2018,
Cilt: 10 Sayı: 2, 64 - 72, 15.08.2018
Öz
Kaynakça
- Jafarzadyeganeh, M.,Modeling and developing a new generation tire chain with finite element analysis (FEA), Institute Of Natural And Applied Sciences, MSc.Thesis, Isparta, 2017.
- Danielson, K.T., Noor, A.K., Green, J.S., Computational strategies for tire modeling and analysis, Computers & Structures, 4, 673-693, 1996.
- Mousseau, C.W., Hulbert, G.M., An efficient tire model for analaysis of spindle forces produced by a tire impacting large obstacles, Computer Methods in Applied Mechanics and Engineering, 135, 15-34, 1996.
- Xiangquiao Y., Non-linear three-dimensional finite element modeling of radial tires, Mathematics and computers in simulation, 58, 51–70, 2001.
- Lee, J.H. Finite element modeling of interfacial forces and contact stresses of pneumatic tire on fresh snow for combined longitudinal and lateral slips, Elsevier, Journal of Terramechanics, 48, 171-197, 2011.
- Cho, J.R., Numerical estimation of rolling resistance and temperature distribution of 3-D periodic patterned tire, International Journal of Solids and Structures, 50, 86-96, 2013.
- Wei, C., Olatunbosun, O.A., Transient dynamic behaviour of finite element tire traversing obstacles with different heights, Journal of Terramechanics, 1-16, 2014.
- Katz, A., Sankaran, V., Mesh quality effects on the accuracy of cfd solutions on unstructured meshes, 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Aerospace Sciences Meetings, 4 - 7 January 2011,
- Hou, C.Y., Development of a varying mesh scheme for finite element crack closure analysis, Engineering Fracture Mechanics, 148, 42-59, 2015.
- Tigdemir M., Jafarzadyeganeh M., Avcar M., Finite element modelling of wheel on the snow. 4th international conference on computational and experimental science and engineering, 1, 452, 2017.
- Yan, X., Non-linear three-dimensional finite element modeling of radial tires, Mathematics and Computers in Simulation, 58(1), 51–70, 2001.
- Borstad, C.P., McClung, D.M., Numerical modeling of tensile fracture initiation and propagation in snow slabs using nonlocal damage mechanics, Cold Regions Science and Technology, 69(2-3), 145-155, 2011
- Krmela, J., Krmelová, Replacement of Belt Structure for FEA of Tire, Procedia Engineering, 132-136, 2016.
- ANSYS, 2016. Academic Student Engineering Simulation Software.
Toplam 14 adet kaynakça vardır.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Mühendislik |
| Bölüm | Makaleler |
| Yazarlar | |
| Yayımlanma Tarihi | 15 Ağustos 2018 |
| Kabul Tarihi | 26 Temmuz 2018 |
| Yayımlandığı Sayı | Yıl 2018 Cilt: 10 Sayı: 2 |
