The effect of object surface colors on terrestrial laser scanners

Yıl 2017, Cilt: 2 Sayı: 2, 68 - 74, 01.06.2017

Aydan Yaman Hacı Murat Yılmaz

https://doi.org/10.26833/ijeg.296835

Cited By: 4

Öz

Terrestrial laser scanning systems are a relatively new measurement technology. With the advances in technology, these systems have gained more popularity and have been increasingly used in many different fields. With the terrestrial laser scanning technology, three- dimensional (3D) information and images of objects can be obtained in a more practical and easier manner and with higher accuracy compared to the conventional methods. Additionally, the measurement of an object is performed without being in physical contact. In this study, a test area of 2.10 meters ×2.80 meters in a vertical position was scanned at a 35 meters distance using different object colors (white, red, blue and green) with a Topcon laser scanner to determine the position accuracy of the scanner according to the colors. Then, by switching the Y and Z coordinates obtained from laser scanning, the test area was placed in a horizontal position, which resulted in a half rectangular prism. Then, the volume of this prism and the volumes obtained from laser scanning were calculated and compared. Based on the differences in this values, it was found that within a scanning distance of 35 meters, the position accuracy of the laser scanner varied between 5.7 mm and 12.2 mm. In addition, the best result was obtained by scanning the test area in white color.

Anahtar Kelimeler

Laser Scanning Technology, Object Color, Position Accuracy, Volume

Kaynakça

• Demir, N., Bayram, B., Alkış, Z., Helvacı, C., Çetin, I., Vogtle, T., Ringle, K. and Steinle, E., 2004. Laser scanning for terrestrial photogrammetry, alternative system or combined with traditional system?, XX. ISPRS Symposium, Commission V, WG V/2, 12-21 July, Istanbul, 193-197.
• El-Hakim, S.F., 2001. 3D modeling of complex environments, SPIE Proceedings, Electronic Imaging, 4309, NRC 44153.
• Ingensand, H., Ryf, A. and Schulz, T., 2003. Performances and experiences in terrestrial laserscanning, Proceedings of the 6th Conference on Optical 3D Measurement Techniques, Zurich.
• Karşıdağ, G. and Alkan, R.M., 2012. Analysis of the accuracy of terrestrial laser scanning measurements, Electronic Journal of Map Technologies, 4 (2), 1-10.
• Shulz, T. and Ingesand, H., 2004, Terrestrial laser scanning- investigations and applications for high precision scanning, Fig Working Week 2004, Athens, Greece.
• Yılmaz, H.M., 2007. The effect of interpolation methods in surface definition: an experimental study, Earth Surface Processes and Landforms, 32, 1346-1361.
• Yılmaz, H.M., Yakar, M., Yıldız, F., Karabörk, H., Kavurmacı, M.M., Mutluoğlu, Ö. and Göktepe, A., 2009. Monitoring of corrosion in fairy chimney by terrestrial laser scanning, JIEAS Journal of International Environmental Application and Science, 4 (1), 86-91.