In
this study, stresses and strains that occur on the surface of material are
investigated for a flat plate that is made cooling as numerically and
analytically. The cooling blowing ratios applied to the surface vary between
0.5 and 1.75. The cooling injection angle is 30 degrees with the horizontal.
Plexiglas plate were used in experiments which done for analytical solution and
numerical modelling studies. Air was injected to cooling zone at 57 oC
and 77 oC. The results show that the cooling surface size varies
with the blow ratio. In addition, the sizes of thermal stresses and
displacements of surface set out that they are indicators of cooling.
Konular | Mühendislik |
---|---|
Bölüm | Articles |
Yazarlar | |
Yayımlanma Tarihi | 26 Eylül 2017 |
Kabul Tarihi | 21 Temmuz 2017 |
Yayımlandığı Sayı | Yıl 2017 Cilt: 3 Sayı: 3 |
Alıntı-Gayriticari-Türetilemez 4.0 Uluslararası (CC BY-NC-ND 4.0)