Forecasting weathering and rock erosion through rock surface hardness: A case study on the Avşa Island granite formations

Yıl 2018, Sayı: 1, 1 - 12, 15.10.2018

Hüseyin Turoğlu

Öz

Rock erosion and its severity are directly proportional to the severity weathering. Erosion develops rapidly and effectively in rocks where the weathering is severe. The variations in the rock surface hardness values are indication of the weathering level of rocks. Rock surface hardness values tend to decrease on the weathered rocks. Rock surface hardness itself can be measured and classified easily using a Schmidt hammer.

The purpose of this study is to asses and analyse the rock hardness across Avşa Island (in the Marmara Sea, Turkey) using the Schmidt hammer methodology.

Rock surface hardness measurements were made on Avşa Island granites at 100 different locations using the Schmidt hammer. A statistical analysis of the measurement data was carried out followed by field controls of the new data obtained from the analysis. The results were used to create a rock surface hardness classification for Avşa Island, and were also assessed as indicators of weathering rate and erosion potential.

This new classification indicates that Avşa Island's Granite rocks can be segmented into 3 basic groups. 40% of the granites are "Hard", without serious weathering and resistant to erosion. The second group, represents 10% of the of Avşa Island's granite and is classified as "Medium to Weak". The remaining 50% Group 3 granites in the Avşa Island fall into the "Very weak" class. Group 3 granites are rocks deformed by weathering, and have high erosion potential.

Anahtar Kelimeler

Rock surface hardness, weathering, Rock erosion, Granite weathering, Schmidt hammer

KAYA YÜZEYİ SERTLİĞİ İLE AYRIŞMA VE KAYA EROZYONUNUN TAHMİN EDİLMESİ: AVŞA ADASI GRANİT FORMASYONLARI ÜZERİNE BİR ÖRNEK ÇALIŞMA

Öz

Kaya erozyonu ve onun şiddeti ayrışmanın şiddeti ile doğru orantılıdır. Ayrışmanın şiddetli olduğu kayalarda erozyon hızlı ve etkili olarak gelişme gösterir. Kaya yüzey sertliğindeki değişkenlik ise kayalardaki ayrışma seviyesinin göstergesidir. Ayrışmaya uğrayan kayalarda “Kaya yüzey sertliği” azalma yönünde değişim gösterir. Kaya yüzey sertliği Schmidt çekici ile ölçülebilir ve sayısal olarak ifade edilebilir, sınıflandırılabilir.   

Bu çalışmada; Avşa Adası’nda (Marmara Denizi, Türkiye), Schmidt çekici kullanılarak Granit Kaya yüzey sertliği ölçümü yapılması, sonuçların Avşa Adası için ayrışma ve erozyon göstergesi olarak değerlendirilmesi amaçlanmıştır. 

Avşa Adası granitlerinde, 100 farklı lokasyonda, Schmidt çekici kullanılarak kaya yüzey sertliği ölçümü yapılmıştır. Ölçüm verilerinin istatistiksel analizleri yapılmış, analizler ile elde edilen yeni verilerin arazi kontrolleri gerçekleştirilmiştir. İlk sonuçlar; Avşa Adası için sertlik tanımlamaları açısından sınıflandırılarak, aşınma derecesi ve erozyon potansiyeli göstergesi olarak değerlendirilmiştir.

Sonuçlar Avşa Adası'nın Granit kayalarının 3 temel grup olarak sınıflandırılabileceğini göstermektedir. Granitlerin % 40 ı “Sert” ve henüz şiddetli ayrışmaya uğramamış, erozyona karşı dirençlidir. % 10 oranındaki 2. Grup; “Orta ve Zayıf” sertliktedir. %50 oranındaki 3. Grup granitler ise “Çok Zayıf” olarak tanımlanmıştır. 3. Grup granitler şiddetli ayrışma ile deforme olan ve yüksek erozyon potansiyeline sahip kayalardır.    

Anahtar Kelimeler

Kaya yüzey sertliği, Kaya erozyonu, Schmidt Çekici, Granit ayrışması

Kaynakça

• Aoki, H. & Matsukura, Y. (2007) A new technique for non-destructive field measurement of rock-surface strength: an application of the Equotip hardness tester to weathering studies. Earth Surface Processes and Landforms, 32/ 12: 1759–1769, DOI: 10.1002/esp.1492. Augustinus, P.C. (1992) Rock resistance to erosion: some further considerations. Earth Surface Processes and Landforms, 16: 563-569. Aydin, A. ve Basu, A. (2005) The Schmidt Hammer in rock material characterization. Engineering Geology, 41: 1211-1214.
• Aydın, A. (2008) ISRM Suggested Method for Determination of the Schmidt Hammer Rebound Hardness: Revised Version. R. Ulusay (Ed.), The ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 2007–2014: 25-33. DOI: 10.1007/978-3-319-07713-0.
• Basu, A. & Aydın, A.A. (2004) Method for normalization of Schmidt hammer rebound values. International Journal of Rock Mechanics & Mining Sciences, 41:1211-1214.
• Colman, S.M. (1981) Rock-weathering rates as functions of time. Quaternary Research, 15: 250-264
• Day, M.J. (1980) Rock hardness: field assessment and geomorphic importance. Professional Geographer, 32: 72-81.
• Day, M.J. (2010) Rock hardness: field assessment and geomorphic importance. The Professional Geographer, 32:1, 72-81, DOI: 10.1111/j.0033-0124.1980.00072.x
• Day, M.J. & Goudie, A.S. (1977) Field assessment of rock hardness using the Schmidt test hammer. BGRG Technical Bulletin, 18: 19-29.
• Ericson, K. (2004) Geomorphological surfaces of different age and origin in granite landscapes: an evaluation of the Schmidt hammer test. Earth Surface Processes and Landforms, Volume 29, Issue 4, Pages 495–509, DOI: 10.1002/esp.1048, http://onlinelibrary.wiley.com/doi/10.1002/esp.1048/full
• Hall, K., Thorn, C., Sumner, P. (2012) On the persistence of ‘weathering’. Geomorphology, 149–150: 1–10.
• Huggett, R.J. (2011) Fundamentals of Geomorphology, Third Edition. Routledge, 270 Madison Avenue, New York, NY 10016, ISBN 0-203-86008-X Master e-book ISBN.
• ISRM (1978) Suggested Methods for Determining Hardness and Abrasiveness of Rocks, International Society for Rock Mechanics, International Journal Rock Mechanics and Mining Sciences, Geomechanics Abstracts, 15: 89- 97
• Goudie, A.S. (2006) The Schmidt Hammer in geomorphological research. Progress in Physical Geography, 30: 703 – 718.
• Goudie, A.S. (2016) Quantification of rock control in geomorphology. Earth-Science Reviews, 159: 374–387.
• Kahraman, S., Fener, M. & Günaydin, O. (2002) Predicting the Schmidt Hammer values of in-situ rock from core sample values. International Journal of Rock Mechanics and Mining Sciences, 39: 395–99.
• McCarroll, D. (1991) The schmidt hammer, weathering and rock surface roughness. Earth Surface Processes and Landforms, 16/5, 477–480, DOI: 10.1002/esp.3290160510
• Mol, L. (2014) Measuring rock hardness in the field. British Society for Geomorphology, ISSN 2047-0371, Geomorphological Techniques, Chapter 1, Section 3.2, pages 1- 8.
• Moses, C., Robinson, D., Barlow, J. (2014) Methods for measuring rock surface weathering and erosion: A critical review. Earth-Science Reviews, 135: 141 – 161.
• Placek, A. ve Migoń, P. (2007) Rock–landform relationships in the Sudetes in the light of rock strength assessment using the Schmidt hammer. In: Goudie, A. S., Kalvoda, J. (Eds): Geomorphological Variations. Nakladatelstvi P3K, Prague, Pages 287-311.
• Saptonoa, S., Kramadibratab, S., Sulistiantob, B. (2013) Using the Schmidt Hammer on Rock Mass Characteristic in Sedimentary Rock at Tutupan Coal Mine. Procedia Earth and Planetary Science, 6: 390 – 395.
• Selby, M.J. (1980) A rock-mass strength classification for geomorphic purposes: with tests from Antarctica and New Zealand. Zeitschrift fur Geomorphologie, Neue Folge, 24: 31–51.
• Sharma, V.K. (2010) Introduction to Process Geomorphology. CRC Press, Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742. International Standard Book Number-13: 978-1-4398-0338-7 (Ebook-PDF).
• Shobe, C.M., Hancock, G.S., Eppes, M.C., Small, E.E. (2017) Field evidence for the influence of weathering on rock erodibility and channel form in bedrock rivers. Earth Surface Processes and Landforms, 42: 1997–2012. https://onlinelibrary. wiley.com/doi/abs/10.1002/esp.4163
• Viles, H.A., Goudie, A.S., Grab, S., Lalley, J. (2011) The use of the Schmidt Hammer and Equotip for rock hardness assessment in geomorphology and heritage science: A comparative analysis. Earth Surface Processes and Landforms, 36(3):320-333. DOI10.1002/esp.2040
• Yaşar, E. & Erdoğan, Y. (2004) Estimation of rock physicomechanical properties using hardness methods. Engineering Geology, 71/3-4: 281-288.
• Yılmaz, I. & Sendir, H., (2002) Correlation of Schmidt hardness with unconfined compressive strength and Young’s modulus in gypsum from Sivas (Turkey). Engineering Geology, 66: 211–19.
• Web 1 https://www.proceq.com/compare/schmidt-rebound-hammers/
• Web 2 https://www.corrosionpedia.com/definition/5963/schmidt-hammer
• Web 3 https://www.gardco.com/pages/hardness/schmidthammer.cfm
• Web 4 http://www.controls-group.com/eng/rock-mechanics-testing-equipment/rock-classification-hammer.php