Fault Analysis in Multi-Phase Power Systems Considering Symmetrical Components and Phase Coordinates Methods

Yıl 2019, Cilt: 3 Sayı: 1, 42 - 60, 23.05.2019

Said Mirza Tercan Erdin Gökalp

Öz

In this study, fault calculations in multi-phase
power system (MPPS) are examined. Three-phase power system (3-PPS) and twelve-phase
power system (12-PPS) are modelled. Analyzing faults in MPPS, symmetrical
components method is used. Connection of sequence circuits for all fault types
in 12-PPS are provided. Load flow analysis for MPPS is made by using phase
coordinates method. It includes modeling of power systems components such as
generator, transformer, and line for 12-PPS. Therefore, bus voltages are
calculated before fault calculation. Different types of faults are calculated.
Proposed fault calculation method for any type of fault at any bus of MPPS is
provided. Fault calculations were done for all possible faults in 12-PPS. Symmetrical
and asymmetrical fault currents in 12-PPS were calculated and listed. The fault
location and type compared with other different locations and types of faults
in 12-PPS. In addition, 3-PPS fault currents compared with MPPS examined in
this study.

Anahtar Kelimeler

symmetrical fault, asymmetrical fault, fault analysis, symmetrical component, multi-phase power system, twelve-phase power system

Kaynakça

• [1] Uma Pal and L. P. Singh, “Feasibility and Fault Analysis of Multi-Phase (12-Phase) Systems,” J. Inst. Eng. Electr. Eng. Div., vol. 65, pp. 138–146, 1985.
• [2] N. B. Bhatt, S. S. Venkata, W. C. Guyker, and W. H. Booth, “Six-phase (multi-phase) power transmission systems: Fault analysis,” IEEE Trans. Power Appar. Syst., vol. 96, no. 3, pp. 758–767, May 1977.
• [3] A. Augugliaro, L. Dusonchet, and A. Spataro, “Mixed three-phase and six-phase power system analysis using symmetrical components method,” Int. J. Electr. Power Energy Syst., vol. 9, no. 4, pp. 233–240, 1987.
• [4] S. S. Venkata, W. C. Guyker, W. H. Booth, J. Kondragunta, N. K. Saini, and E. K. Stanek, “138-kV, Six-phase Transmission System: Fault Analysis,” IEEE Power Eng. Rev., vol. PER-2, no. 5, pp. 40–41, 1982.
• [5] C. Grande-Moran, “Series faults in six-phase electric power systems,” Electr. Power Syst. Res., vol. 13, no. 2, pp. 109–117, 1987.
• [6] M. Abdel-akher and K. M. Nor, “Fault Analysis of Multiphase Distribution Systems,” IEEE Trans. Power Deliv., vol. 25, no. 4, pp. 2931–2939, 2010.
• [7] K. Hassan Youssef and F. Mabrouk Abouelenin, “Analysis of simultaneous unbalanced short circuit and open conductor faults in power systems with untransposed lines and six-phase sections,” Alexandria Eng. J., vol. 55, no. 1, pp. 369–377, 2016.
• [8] S. Kulkarni, B. Pulavarthi, A. B. Parit, and S. S. Patil, “Comparative analysis of three phase, five phase and six phase symmetrical components with MATLAB,” in International Conference on Data Management, Analytics and Innovation, Pune, India, Feb 24-26, 2017, pp. 182–186.
• [9] A. S. Binsaroor and S. N. Tiwari, “Evaluation of twelve-phase (multiphase) transmission line parameters,” Electr. Power Syst. Res., vol. 15, no. 1, pp. 63–76, 1988.
• [10] J. R. Stewart and T. L. Hudson, “138 kV 12-phase as an alternative to 345 kV 3-phase,” Conf. Proc. ’88., IEEE Southeastcon, pp. 258–263, 1988.
• [11] E. Gökalp, “Üç ve Çok Fazlı Enerji Sistemlerinde Simetrili Bileşenler Yöntemi ve Faz Koordinatları Yöntemi ile Arıza Analizi,” Doktora Tezi, Fen Bilimleri Enstitüsü, Yıldız Teknik Üniversitesi, 1994.
• [12] J. J. Grainer and W. Stevenson, Power System Analysis. McGraw-Hill, 1994.
• [13] Z. Demir, O. Kilic, and S. Ozbey, “Calculation of Load Flow in Mixed Three-Phase Line and Multiphase (Six-Phase and Twelve-Phase) Line by The Method of Phase Coordinate,” in Proceedings of the 6th International Conference on Optimization of Electrical and Electronic Equipments, Brasov, Romania, May 14-15, 1998, pp. 139–145.
• [14] Ş. Özbey, “Enerji sistemlerinin faz koordinatları ile incelenmesi ve çok fazlı sistemlerde yük akış analizi,” Doktora Tezi, Fen Bilimleri Enstitüsü, Yıldız Teknik Üniversitesi, 1991.