BibTex RIS Kaynak Göster

KBİ SAMSUN BAKIR İZABE TESİSLERİ CÜRUF ÖĞÜTME DEVRESİNİN MODELLEMESİ VE SİMÜLASYONU

Yıl 2004, Cilt: 43 Sayı: 3, 13 - 26, 01.09.2004

Öz

Bu çalışmada, KBİ Samsun İzabe Tesisleri cüruf zenginleştirme tesisi öğütme devresinde yürütülen
modelleme ve simülasyon çalışmaları sunulmaktadır. Öğütme ve flotasyon devresinde örnekleme
çalışmaları yürütülmüş, tüm örneklerin tane boyut dağılımları ve katı içerikleri, flotasyon devresinden
alınan örneklerin bakır içerikleri belirlenmiştir. Madde denkliği hesaplamaları sonunda akışların katı ve
su tonajları hesaplandıktan sonra, öğütme devresinde bulunan otojen ve çakıllı değirmen, elek ve
hidrosiklonların matematiksel modelleri oluşturulmuştur. Oluşturulan modeller devre performansını
başarıyla tahmin etmiştir. Daha sonra, cürufun soğutma süresinin öğütme devresi performansı
üzerinde etkisi simülasyon yoluyla incelenmiştir. Şok soğutulan cürufla daha ince flotasyon beslemesi
elde edilirken, diğer numuneler benzer tane boyut dağılımı vermektedir

Modelling and Simulation of the Slag Grinding Circuit at KBİ Samsun Copper Smelter

Yıl 2004, Cilt: 43 Sayı: 3, 13 - 26, 01.09.2004

Öz

In this study, modelling and simulation studies performed in the grinding circuit of slag concentration
plant at KBİ Samsun Smelter are presented. An elaborate sampling survey was performed in grinding
and flotation circuits and size distributions and solid contents of the all samples and copper content of
the samples taken from flotation circuits were determined. After calculation of solid and water flow rates
by mass balancing, models for the autogenous and pebble mills, screen and hydocyclones were
developed. Models predicted the circuit performance successfully. Then, the effect of cooling duration
of slag on the performance of the grinding circuit was investigated by simulation. Shock cooled slags
gave finer flotation feed while the other samples provided similar size distributions.

Toplam 0 adet kaynakça vardır.

Ayrıntılar

Diğer ID JA36DF73RG
Bölüm Araştırma Makalesi
Yazarlar

Tarık Doğru Bu kişi benim

Levent Ergün Bu kişi benim

Yayımlanma Tarihi 1 Eylül 2004
Gönderilme Tarihi 1 Eylül 2004
Yayımlandığı Sayı Yıl 2004 Cilt: 43 Sayı: 3

Kaynak Göster

APA Doğru, T., & Ergün, L. (2004). Modelling and Simulation of the Slag Grinding Circuit at KBİ Samsun Copper Smelter. Scientific Mining Journal, 43(3), 13-26.
AMA Doğru T, Ergün L. Modelling and Simulation of the Slag Grinding Circuit at KBİ Samsun Copper Smelter. Mining. Eylül 2004;43(3):13-26.
Chicago Doğru, Tarık, ve Levent Ergün. “Modelling and Simulation of the Slag Grinding Circuit at KBİ Samsun Copper Smelter”. Scientific Mining Journal 43, sy. 3 (Eylül 2004): 13-26.
EndNote Doğru T, Ergün L (01 Eylül 2004) Modelling and Simulation of the Slag Grinding Circuit at KBİ Samsun Copper Smelter. Scientific Mining Journal 43 3 13–26.
IEEE T. Doğru ve L. Ergün, “Modelling and Simulation of the Slag Grinding Circuit at KBİ Samsun Copper Smelter”, Mining, c. 43, sy. 3, ss. 13–26, 2004.
ISNAD Doğru, Tarık - Ergün, Levent. “Modelling and Simulation of the Slag Grinding Circuit at KBİ Samsun Copper Smelter”. Scientific Mining Journal 43/3 (Eylül 2004), 13-26.
JAMA Doğru T, Ergün L. Modelling and Simulation of the Slag Grinding Circuit at KBİ Samsun Copper Smelter. Mining. 2004;43:13–26.
MLA Doğru, Tarık ve Levent Ergün. “Modelling and Simulation of the Slag Grinding Circuit at KBİ Samsun Copper Smelter”. Scientific Mining Journal, c. 43, sy. 3, 2004, ss. 13-26.
Vancouver Doğru T, Ergün L. Modelling and Simulation of the Slag Grinding Circuit at KBİ Samsun Copper Smelter. Mining. 2004;43(3):13-26.