Investigation of Thermal and Electrical Conductivity Properties of Carbon Black Coated Cotton Fabrics

Yıl 2015, Cilt: 27 - Özel Sayı I: Future Technical Textiles, 91 - 94, 09.07.2015

Nergis Demirel Gültekin İsmail Usta

https://doi.org/10.7240/mufbed.67752

Cited By: 5

Öz

In this study, the thermal and electrical conductivity properties of carbon black coated cotton fabrics were investigated. To obtain coated cotton fabrics, first carbon black nanoparticles were dispersed in distilled water. To improve dispersion stability of water based carbon black coating solutions, anionic wetting and dispersing agent was used. Plain weaved cotton fabrics were dipped into carbon black dispersion for 5 min. Because of the strong absorption, the cotton fabric was quickly coated by the carbon black dispersion. Then, the fabric with carbon black dispersion was subsequently dried in an oven at 120 °C for 10 min to remove water. The dipping-drying process was repeated for 5 times to increase the carbon black loading in cotton fabric. Different carbon black concentrations on coating process were examined. The effect of carbon black loading on thermal and electrical conductivity properties of fabrics were investigated.

Anahtar Kelimeler

Thermal and Electrical Conductivity, carbon black coating, cotton fabrics, functional and smart textiles

Kaynakça

• Li, D. and G. Sun, Coloration of textiles with self- dispersible carbon black nanoparticles. Dyes and Pigments, 2007. 72: p. 144-149.
• Negru, D., C.T. Buda, and D. Avram, Electrical Conductivity of Woven Fabrics Coated with Carbon Black Particles. FIBRES & TEXTILES in Eastern Europe, 2012. 20(1): p. 53-56.
• Salaeh, S. and C. Nakason, Influence of Modified Natural Rubber and Structure of Carbon Black on Properties of Natural Rubber Compounds. POLYMER COMPOSITES, 2012: p. 1-12.
• Iijima, M., et al., Effect of structure of cationic dispersants on stability of carbon black nanoparticles and further processability through layer-by-layer surface modificatio. Chemical Engineering Science, 2013. 85: p. 30–37.
• Sanchez- Gonzalez, J., et al., Electrical conductivity of carbon blacks under compression. Carbon, 2005. 43: p. 741–747.
• Al-Saleh, M.H. and U. Sundararaj, Nanostructured carbon black filled polypropylene/polystyrene blends containing styrene–butadiene–styrene copolymer: Influence of morphology on electrical resistivity. European Polymer Journal, 2008. 44: p. 1931–1939.
• Pantea, D., et al., Electrical conductivity of conductive carbon blacks: influence of surface chemistry and topology. Applied Surface Science, 2003. 217: p. 181– 193.
• Pantea, D., et al., Heat-treatment of carbon blacks obtained by pyrolysis of used tires. Effect on the surface chemistry, porosity and electrical conductivity. Journal of Analytical and Applied Pyrolysis, 2003. 67: p. 55–76.
• Heiser, J.A. and J.A. King, Thermally Conductive Carbon Filled Nylon 6,6. POLYMER COMPOSITES, 2004. 25(2): p. 186-193.
• Xiang, J. and L.T. Drzal, Investigation of exfoliated graphite nanoplatelets (xGnP) in improving thermal conductivity of paraffin wax-based phase change material. Solar Energy Materials & Solar Cells, 2011. 95: p. 1811–1818.