PRODUCTION AND PROPERTIES OF AL2024-2 WT.% (SiC-B4C) HYBRID NANOCOMPOSITE

Yıl 2018, Cilt: 13 Sayı: 1, 29 - 33, 20.01.2018

Abdullah Karabacak Aykut Çanakçı Serdar Özkaya Müslim Çelebi Emre Yalçın

Öz

In this paper, production
and properties of Al2024-SiC-B₄C hybrid nanocomposite produced using
mechanical alloying and hot pressing by powder metallurgy method. First of all,
Al2024, SiC and B₄C powders were
alloyed in planetary ball mill at room temperature with 8 hours to be obtained
homogeneous powder distribution. After, the hot pressing technique was
used for producing hybrid nanocomposite with 2 weight percentage (1 wt.% SiC
and 1 wt.% B₄C respectively) of SiC and B₄C
reinforcements. The mechanical (hardness, tensile strength, bending strength,
fracture surface), physical (density, porosity) of properties and
microstructure of Al2024-SiC-B₄C hybrid nanocomposite were
investigated. It was showed that the uniform distribution of dispersion of
SiC-B₄C nano particles within Al2024 matrix.

Anahtar Kelimeler

Powder metallurgy, SiC, Nanocomposite, B4C, Hybrid, Hybrid

Kaynakça

• 1. Miracle, D.B., (2005). Composites Science and Technology, 2526, 65.
• 2. Mazahery, A. and Shabani, M.O., (2012). Journal of Materials Engineering and Performance, 247, 21.
• 3. Toptan, F., Kilicarslan, A., Karaaslan, A., Ciğdem, M., and Kerti, I., (2010). Materials and Design, 87, 31.
• 4. LIM, K.Y., KIM, Y.W., and KIM, K.J., (2014). Electrical properties of SiC ceramics sintered with 0.5 wt% AlN–RE2O3, (J) Ceramics International, 40:8885−8890.
• 5. Liu, Y., Chai, N., Qin, H., Li, Z., Ye, F., and Cheng, L., (2015). Tensile Fracture Behavior and Strength Distribution of SiCf/SiC Composites with Different SiBN Interface Thicknesses, (J) Ceramics International, 41:1609−1616.
• 6. Tuncer, N., Tasdelen, B., and Arslan, G., (2011). Ceramics International 37, 2861–2867.
• 7. Alizadeh, A., Taheri-Nassaj, E., and Hajizamani, M., (2011). Hot Extrusion Process Effect on Mechanical Behavior of Stir Cast Al Based Composites Reinforced with Mechanically Milled B4C Nanoparticles, J Mater Sci Technol, 27(12):1113–9.
• 8. Abdoli, H., Asgharzadeh, H., and Salahi, E., (2009). Sintering Behavior of Al–AlNnanostructured Composite Powder Synthesized by High-Energy Ball Milling, J Alloys Compd, 473, 116, 22.
• 9. Sajjadi, S.A., Torabi Parizi, M., Ezatpour, H.R., and Sedghic, A., (2012). Fabrication of A356 Composite Reinforced with Micro and Nano Al2O3 Particles by a Developed Compocasting Method and Study of Its Properties, J Alloys Compd, 511, 226–31.
• 10. Erdemir, F., Canakci, A., Varol, T., and Ozkaya, S., (2015). Journal of Alloys and Compounds, 589, 644.