PRODUCTION OF AA5754/B4C COMPOSITE MATERIALS BY THE SEMI-SOLID STIRRING METHOD

Yıl 2019, Cilt: 14 Sayı: 2, 57 - 67, 20.04.2019

Rifat Yakut Nilhan Ürkmez Taşkın

Öz

      Aluminum
composites were produced by reinforcing an AA5754 aluminum alloy with B4C
particles. The semi-solid stirring and low-pressure solidification methods were
used to produce AA5754/B4C composites, and the mechanical characteristics of
the samples that were obtained were determined by three-point bending and
compression tests. Additionally, microstructure examinations were made by SEM,
EDS and XRD, and the sucsesfull producibility of the B4C reinforced aluminium
composites with the method that was used was seen.                   

Anahtar Kelimeler

B4C, Aluminum, Metal Matrix Composite, Semi-Solid Stirring

PRODUCTION OF AA5754/B4C COMPOSITE MATERIALS BY THE SEMI-SOLID STIRRING METHOD

Öz

      Aluminum composites were produced by reinforcing an AA5754 aluminum alloy with B4C particles. The semi-solid stirring and low-pressure solidification methods were used to produce AA5754/B4C composites, and the mechanical characteristics of the samples that were obtained were determined by three-point bending and compression tests. Additionally, microstructure examinations were made by SEM, EDS and XRD, and the sucsesfull producibility of the B4C reinforced aluminium composites with the method that was used was seen.                   

Anahtar Kelimeler

Aluminum, B4C, Metal Matrix Composite, Semi-Solid Stirring, Hardness

Kaynakça

• [1] Toptan, F., (2011). Production of High Wear Resistant B4c Particle Reınforced Aluminum Matrix Composites. PhD Thesis. İstanbul: Yıldız Technical University Institute of Science and Technology.
• [2] Pul, M., Calin, R., and Citak, R., (2011). An Investigation of Surface Quality of Turning in Al Matrix MgO Reinforced Composite Materials. Journal of the Faculty of Engineering and Architecture of Gazi University: Vol::26, No:1, pp:81-88,.
• [3] Aksöz, S., Özdemir, A. T., Bostan, B., (2012). Alloyed AA2014 Aluminum Powders Synthesized with Carbon and Determined Properties. Journal of the Faculty of Engineering and Architecture of Gazi University, Vol: 27, No: 1, pp: 109-115.
• [4] Arslan, D., Gürü, M., (2013. Production of Boron Carbıde by Mechanochemical Method and Investigation of Usability on the Aluminum Based Composite Material. Journal of the Faculty of Engineering and Architecture of Gazi University, Vol: 28, No: 4, pp: 875-883.
• [5] Tosun, N., Kuru, C., and Altıntaş, E., (2010). Investigation of Surface Roughness in Milling with Air and Conventional Cooling Method. Journal of the Faculty of Engineering and Architecture of Gazi University, Vol: 25, No: 1, pp: 141-146.
• [6] Tuncer, N., Taşdelen, B., and Arslan, G., (2011). Effect of Passivation and Precipitation Hardening on Processing and Mechanical Properties of B4C/Al Composites, Ceramics International, Vol: 37, No: 7, pp: 2861-2867.
• [7] Ekici, E., (2012). The Manufacture of Aluminium Matrix Composites with B4C Reinforcing Element and Addition of Graphite and the Analysis of Mechanical Features and Their Machinability on Milling. PhD Thesis. Ankara: Gazi University Institute of Science and Technology.
• [8] Groover, M.P., (2010). Fundamentals of Modern Manufacturing, Materials, Processes and Systems 4th Edition. U.S.A.
• [9] Yalçın, E.D., (2010). Investigation of Joinability AA 7075 and AA5754 Aluminum Alloys by Friction Stir Welding Method. Master Thesis. Karadeniz Technical University Institute of Science and Technology.
• [10] Singla, M., Dwivedi, D. D., Singh, L., and Chawla, V., (2009). Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite. Journal of Minerals & Materials Characterization & Engineering, Vol:8, No:6, pp:455-467.
• [11] Atik, E., Ünlü, B.S., Sen, O., and Çavdar, U., (2006). Investigation of Wear Strength and Mechanical Properies of Particle Reinforced AlSi12CuNiMg Composites. C.B.U. Journal of Science, Vol:2 No:2 pp:75-87.
• [12] Kılıç, C., (2008). Sıkıştırma Döküm Yöntemi İle Üretilmiş ve Soğuk Haddelenmiş AlMg3/SiCp Kompozitinin Aşınma Özelliklerinin İncelenmesi, Master Thesis. Trakya University Institute of Science and Technology.
• [13] Ürkmez, N., (2004). AlMg3/SiCp Kompozitlerinin Üretimi ve Mekanik Özelliklerdeki Değişimlerin İncelenmesi. PhD Thesis. İstanbul: Yıldız Technical University Institute of Science and Technology.