Capacity Analysis on Multi-Lane Roundabouts: An Evaluation With Highway Capacity Manual 2010 Capacity Model

Yıl 2014, Cilt: 20 Sayı: 6, 225 - 231, 01.06.2014

Melike Ersoy Hilmi Berk Çelikoğlu

Öz

In this study, capacity estimations with the incorporation of Highway Capacity Manual (HCM) 2010 method are evaluated. Parameter based sensitivity analysis on calculations with the new HCM formula and a comparative evaluation of the new methodology with two most common capacity analysis methods, i.e., the method of critical gap acceptance and the method of regression analysis, are performed. Maximum and minimum headway intervals of follow up time and critical gap parameters are alternated within the sensitivity analysis. The Transport Research Laboratory formula for regression and Australian formula for gap acceptance method are considered in comparison. Relative comparisons of predictions on capacity by HCM2010 method, regression analysis and gap acceptance method are presented considering field data obtained by observations at two roundabouts in Izmir, Turkey. The results of the study show that the HCM2010 formula led to lower capacity estimates than regression analysis and higher estimates than the gap acceptance method. Regarding the real capacity observations under high circulating flow-rates the HCM2010 method yielded to more appropriate results than the regression method. In addition to comparisons, studies on the sensitivity analysis show that entry capacity estimates possess sharper changes as smaller follow up headways are accepted.

Anahtar Kelimeler

Traffic engineering, Roundabouts.

Çokşeritli Dönel Kavşaklarda Kapasite Analizi: Highway Capacity Manual 2010 Kapasite Modeliyle Bir Değerlendirme

Öz

Bu çalışmada, genel kabul görmüş çok şeritli dönel kavşak kapasite hesap yöntemlerinin uygulanabilirliği, yeni Highway Capacity Manual (HCM) 2010 yöntemiyle karşılaştırılmıştır. Yöntemlerden elde edilen sonuçlar, yerel çalışmalardan toplanan verilerin ışığında değerlendirilmiştir. Karşılaştırma için regresyon analiz yöntemini temsilen Transportation Research Laboratory (TRL) formülasyonu, Kritik aralık kabulü yöntemini temsilen Avusturya Hesap Yöntemi seçilmiştir. Bunlara ek olarak, sınırlı öncelik ve ters öncelik koşullarının göz önünde bulundurulduğu kalibre edilmiş kritik aralık yöntemi ve HCM 2010 da yerel uygulamalar için öngörülen kalibre edilmiş formüller ile hesaplamalar yapılmış ve HCM 2010'un olağan değerleriyle karşılaştırılmıştır.Çalışmanın sonucunda elde edilenler, kritik aralık kabul yöntemi ve regresyon yönteminin HCM 2010 olağan değerlerine kıyasla genellikle daha yüksek sonuçlar verdiğini göstermiştir. Yöntemler arasında yapılan regresyon analizleri sonucu, özellikle yüksek dönen akımlar altında kritik aralık kabul yönteminin HCM 2010 yönteminden daha uygun sonuçlar verdiği görülmüştür. Ancak HCM 2010'da yerel uygulamalar için kalibrasyon yapılmasını sağlayan formülasyon sonucunda elde edilenler, olağan formülasyonun verdiği düşük kapasite tahminlerini daha uygun değerlere yükseltmiştir.

Anahtar Kelimeler

Trafik mühendisliği, Yuvarlakada kavşaklar.

Kaynakça

• Federal Highway Administration (FHWA). “Roundabouts: An Informational Guide”. Department of Transportation, Virginia, USA, FHWA-RD-00-67, 2000.
• Akçelik R, Troutbeck RJ. "Implementation of the Australian Roundabout Analysis Method in SIDRA", Highway capacity an Level of Service-Proceedings of the International Symposium on Highway Capacity, Karlsruhe, Germany, 1991.
• Tanyel S. A Capacity calculation method for roundabouts in Turkey (in Turkish). Ph.D. Thesis, Technical University of Istanbul, Institute of Science and Technology, Istanbul, Turkey, 2001.
• Highway Capacity Manual 2010. Transportation Research Board of The National Academies, 2010.
• Kimber RM. “The Traffic Capacity of Roundabouts”. Transport and Road Research Laboratory, Crowthorne, England, 942, 1980.
• Troutbeck RJ, Kako S. "Limited Priority Merge at Unsignalised Intersections". Transportation Research Part A: Policy and Practice, 33(3-4), 291-304, 1999.
• Gedizlioglu E. A method for Determining the Practical Capacity at Unsignalised Intersections Due to the Behavior of Minor Stream Drivers (in Turkish). PhD Thesis, Tecnical University of Istanbul, Istanbul, Turkey, 1979.
• Hagring O. Vehicle-Vehicle Interactions at Roundabouts and Their Implications for the Entry Capacity. Dissertation, Dept. of Traffic Planning and Engineering, Lund, Sweden, 1998.
• Tanyel S, Baran T, Özuysal M. "Determining the Capacity of Single-Lane Roundabouts in Izmir, Turkey". ASCE Journal of Transportation Engineering, 131(12), 953–956, 2005.
• Tanyel S, Ozuysal M, Caliskanelli SP, Baran T. "Predicting a Suitable Capacity Estimation Method for Single-Lane Roundabouts in Izmir, Turkey". 11th Meeting of the EURO Working Group on Transportation, Bari, Italy, 27-29 Sept. 2006.
• Tanyel S, Yayla N. "Yuvarlakada Kavşakların Kapasiteleri Üzerine Bir Tartışma", İMO Teknik Dergi, 21(1), 4935-4958, 2010.
• Tanyel S, Celik K, Ozuysal M, Caliskanelli SP. "Different Approaches to Minimum Delay Prediction at Single-Lane Traffic Circles in İzmir, Turkey". Canadian Journal of Civil Engineering, 40(3), 274-284, 2013.
• Tanyel S. "Yuvarlakada Kavşaklarda Anaakımdaki Ağır Araç Yüzdesinin Yanyol Kapasitesi Üzerindeki Etkisi". DEÜ Fen ve Mühendislik Dergisi, 7(1), 19-30, 2005.
• Tanyel S, Caliskanelli SP, Aydin MM, Utku SB. "Yuvarlakada İncelenmesi". İMO Teknik Dergi, 24(4), 6479-6504, 2013. Ağır Araç Etkisinin
• Akçelik R. “An Assesment of the Highway Capacity Manual 2010 Roundabout Capacity Model”. Akçelik and Associates Pty Ltd, Australia, 2011.
• Austroads. “Roundabouts-Guide to Traffic Engineering Practice-Part 6”. Association of Australian State Road and Transport Authorities, Sydney, Australia, AP-G 6, 1993.
• Troutbeck RJ, Brilon W. “Unsignalised Intersection Theory”. Turner Fairbank Highway Research Center (TFHRC), Traffic Flow Theory: A State of Art Report, McLean, VA, USA, 1995.
• Akçelik R. "Roundabputs: Capacity and Performance Analysis". ARRB Research Report, Vermont, Australia, 321, 1998.
• Tanyel S, Yayla N. "A Discussion on the Parameters of Cowan M3 Distribution for Turkey". Transportation Research Part A: Policy and Practice, 37(2), 129-143, 2003.
• Akçelik R. "Speed-Flow and Bunching Relationships for Uninterrupted Flows". Proceeding of 25th Conference of Australian Institute of Transportation Research (CAITR), University of South Australia, Victoria, AU, 3-5 December 2003.
• Troutbeck RJ. "A Review on the Process to Estimate the Cowan M3 Headway Distribution Parameters". Traffic Engineering & Control, 38(11), 600-603, 1997.
• Troutbeck RJ. "Background of HCM Section on Analysis of Performance of Roundabouts". Transportation Research Record, 1646, 54-62, 1998.