Bu
çalışmada amaç; biyomedikal uygulamalarda kullanılmak üzere mevcut
biyomalzemelerden daha hafif, biyolojik saldırılara karşı dirençli ve kemik
yapısına benzer, doku ile uyumlu bir malzeme üretebilmektir. Hafiflik
biyomalzeme uygulamalarında son derece önemlidir, çünkü paslanmaz çelik ve
bunun gibi ağır metalik alaşımlar vücutta kullanıldığında implant çevresindeki
dokulara zarar vererek enfeksiyona sebep olabilmektedir. AZ91 Mg alaşımının
hafifliği büyük bir avantaj olsa da vücutta kullanmak için yeterli mukavemete
sahip değildir ve biyolojik ortamda bozunmaktadır. AZ91 Mg alaşım tozları 320
°C sıcaklık ve 275 MPa basınçta sıcak pres yöntemi ile preslendikten sonra,
yeterli dayanımı sağlamak ve bozunmasını engellemek amacıyla sol-jel ve dip
coating metoduyla yüzeyi farklı daldırma sayılarında hidroksiapatit ile
kaplanmış ve 400 °C’de sinterlenmiştir. Kaplanan numunelerin yüzey
morfolojileri SEM; faz yapıları ise XRD ile incelenmiştir.
Producing
a material lighter than available biomaterials, having corrosion-resistance to
biological attacks and histocompatible similar to the bone structure in order
to use in biomedical applications is the purpose of this study. Lightness is
extremely important in biomedical applications because stainless steel and many
of the similar heavy metallic alloys can lead to infection by causing harm to
tissues around the implant when it is used in the body. Although the lightness
of AZ91 Mg alloy is an advantage, it is not strength enough to use in human
body and it degrades in biological environment. After AZ91 Mg alloy powders
were pressed with unidirectional hot pressing machine under 275 MPa pressure
and 320 °C temperature, their surfaces were coated with hydroxyapatite to
provide sufficient strength and prevent the degradation of specimens using
sol-gel and dip coating method with different dipping number. Then the
specimens were sintered at the temperature of 400 °C. The surface morphologies
and phase structures of coated specimens were analyzed with SEM and XRD,
respectively.
Konular | Mühendislik |
---|---|
Bölüm | Özel Sayı |
Yazarlar | |
Yayımlanma Tarihi | 28 Aralık 2017 |
Yayımlandığı Sayı | Yıl 2017 Cilt: 23 Sayı: 8 |