Determination of Mechanical Properties of Natural Sandwich Composites Produced by Using Waste Material

Yıl 2019, Cilt: 23 Sayı: 4, 569 - 582, 01.08.2019

Ersen Balcıoğlu Raif Sakin

https://doi.org/10.16984/saufenbilder.486846

Cited By: 2

Öz

In the recent year, with the
development of technology the acceleration of the manufacturing of new products
has increased the use of raw materials in the industry. In addition to
decreasing underground resources, increased environmental pollution has opened
the way for the use of natural materials in the industry. Also, the reuse of
materials, which were recycled by recovery methods, is both conservation and
economical method in terms of raw material deficiency. In this study,
mechanical properties of sandwich composites made of natural and recycled
material were investigated. In this context, core material with different
thicknesses (4 mm, 8 mm and 12 mm) were produced using different size granules
(1 mm, 2 mm and 4 mm), which were recycled from the used vehicle tire. Sandwich
composite materials have become final with the combination of core materials
with natural jute fabric reinforced laminated composites. In order to test the
usability of the produced sandwich composite materials as building material, the
mechanical behaviours of the sandwich composite were investigated under tension
and compression load. Test results show that mechanical behaviour of the
material varies according to the granular size, thickness of the core material,
and fiber orientation of reinforcement fabric.

Anahtar Kelimeler

sandwich composites, mechanical properties, recycling, natural fiber, granule size, core thicknes

Kaynakça

• [1] C. Elanchezhian, B. V. Ramnath, G. Ramakrishnan, M. Rajendrakumar, V. Naveenkumar, and M. K. Saravanakumar, “Review on mechanical properties of natural fiber composites.,” Mater. Today Proc., vol. 5, no. 1, pp. 1785–1790, 2018.
• [2] M. Rajesh and T. Kanish, “Mechanical Properties of Natural Fiber Sandwich Composite: Effect of Core Layer,” Mech. Mater. Sci. Eng. MMSE J. Open Access, vol. 9, pp. 1–5, 2017.
• [3] M. Karahan, H. Gul, N. Karahan, and J. Ivens, “Static behavior of three-dimensional ıntegrated core sandwich composites subjected to three-point bending,” J. Reinf. Plast. Compos., vol. 32, no. 9, pp. 664–678, May 2013.
• [4] H. E. Balcıoğlu, “FLEXURAL BEHAVIORS OF SANDWICH COMPOSITES PRODUCED USING RECYCLED AND NATURAL MATERIAL,” Mugla J. Sci. Technol., pp. 64–73, Jun. 2018.
• [5] B. Wang, L. Wu, X. Jin, S. Du, Y. Sun, and L. Ma, “Experimental investigation of 3D sandwich structure with core reinforced by composite columns,” Mater. Des., vol. 31, no. 1, pp. 158–165, Jan. 2010.
• [6] Y. C. Shiah, L. Tseng, J. C. Hsu, and J. H. Huang, “Experimental Characterization of an Integrated Sandwich Composite Using 3D Woven Fabrics as the Core Material,” J. Thermoplast. Compos. Mater., vol. 17, no. 3, pp. 229–243, May 2004.
• [7] L. J. Lee, K. Y. Huang, and Y. J. Fann, “Dynamic Responses of Composite Sandwich Plate Impacted by a Rigid Ball*,” J. Compos. Mater., vol. 27, no. 13, pp. 1238–1256, Dec. 1993.
• [8] A. W. Van Vuure, J. A. Ivens, and I. Verpoest, “Mechanical properties of composite panels based on woven sandwich-fabric preforms,” Compos. Part Appl. Sci. Manuf., vol. 31, no. 7, pp. 671–680, 2000.
• [9] S. . Joshi, L. . Drzal, A. . Mohanty, and S. Arora, “Are natural fiber composites environmentally superior to glass fiber reinforced composites?,” Compos. Part Appl. Sci. Manuf., vol. 35, no. 3, pp. 371–376, Mar. 2004.
• [10] R. D. S. G. Campilho, D. C. Moura, D. J. S. Gonçalves, J. F. M. G. da Silva, M. D. Banea, and L. F. M. da Silva, “Fracture toughness determination of adhesive and co-cured joints in natural fibre composites,” Compos. Part B Eng., vol. 50, pp. 120–126, Jul. 2013.
• [11] Z. Salleh, Y. M. Taib, K. M. Hyie, M. Mihat, M. N. Berhan, and M. A. A. Ghani, “Fracture Toughness Investigation on Long Kenaf/Woven Glass Hybrid Composite Due To Water Absorption Effect,” Procedia Eng., vol. 41, pp. 1667–1673, 2012.
• [12] K. J. Wong, S. Zahi, K. O. Low, and C. C. Lim, “Fracture characterisation of short bamboo fibre reinforced polyester composites,” Mater. Des., vol. 31, no. 9, pp. 4147–4154, Oct. 2010.
• [13] X. Y. Liu and G. C. Dai, “Surface modification and micromechanical properties of jute fiber mat reinforced polypropylene composites,” Express Polym. Lett., vol. 1, no. 5, pp. 299–307, 2007.
• [14] A. V. Rajulu et al., “Mechanical Properties of Short, Natural Fiber Hildegardia populifolia-reinforced Styrenated Polyester Composites,” J. Reinf. Plast. Compos., vol. 24, no. 4, pp. 423–428, Mar. 2005.
• [15] S. N. Monteiro, L. A. H. Terrones, and J. R. M. D’Almeida, “Mechanical performance of coir fiber/polyester composites,” Polym. Test., vol. 27, no. 5, pp. 591–595, Aug. 2008.
• [16] M. Jawaid, H. P. S. Abdul Khalil, A. Hassan, R. Dungani, and A. Hadiyane, “Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites,” Compos. Part B Eng., vol. 45, no. 1, pp. 619–624, Feb. 2013.
• [17] F. Sarasini, J. Tirillò, C. Sergi, M. C. Seghini, L. Cozzarini, and N. Graupner, “Effect of basalt fibre hybridisation and sizing removal on mechanical and thermal properties of hemp fibre reinforced HDPE composites,” Compos. Struct., vol. 188, pp. 394–406, Mar. 2018.
• [18] N. Lu and S. Oza, “A comparative study of the mechanical properties of hemp fiber with virgin and recycled high density polyethylene matrix,” Compos. Part B Eng., vol. 45, no. 1, pp. 1651–1656, Feb. 2013.