Araştırma Makalesi
BibTex RIS Kaynak Göster

Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu ve Topaklanmasına Etkisi

Yıl 2021, Cilt: 60 Sayı: 4, 209 - 217, 21.12.2021
https://doi.org/10.30797/madencilik.922988

Öz

Flotasyon işlemlerinde tane boyutu ve tane morfolojisi gibi tanelerin fiziksel özellikleri, hem tane-tane hem de tane-kabarcık etkileşimlerinde önemli bir rol oynar ve bu da onları flotasyon işlemlerinin değerlendirilmesinde çok önemli kılmaktadır. Bu çalışmada, farklı sürelerde pürüzlendirilen galen tanelerinin pürüzlülük süresine bağlı olarak elde edilen morfolojik özelliklerinin flotasyon verimi ve topaklanma özelliklerine etkisi araştırılmıştır. Deneysel çalışmaların sonuçlarına göre artan pürüzlülük değerlerinde tanelerin flotasyon ve topaklanma özelliklerinin önemli oranda arttığı belirlenmiştir. Sonuç olarak tanelerin tercihli üretimi ile flotasyonun daha düşük kollektör konsantrasyonlarına ötelenerek daha verimli hale getirilebileceği belirlenmiştir.

Destekleyen Kurum

TÜBİTAK

Proje Numarası

117M659

Teşekkür

Yazarlar çalışmaya verdiği destekten dolayı TÜBİTAK (117M659 no’lu Proje ve TÜBİTAK 2218) ve Berivan Tunç’a teşekkür ederler.

Kaynakça

  • Chandra, A.P., Gerson, A.R., 2009. A review of the fundamental studies of the copper activation mechanisms for selective flotation of the sulfide minerals, sphalerite and pyrite, Advances in Colloid and Interface Science, 145 (1-2), 97-110.
  • Feng, D., Aldrich, C., 2000. A comparison of the flotation of ore from the Merensky Reef after wet and dry grinding, International Journal of Mineral Processing, 60 (2), 115–129.
  • Fuerstenau, D., Pradip, P., 2005. Zeta Potentials in the flotation of oxide and silicate minerals, Advances in Colloid and Interface Science, 114-115, 9-26.
  • Güven, O., Serdengecti, M.T., Tunc, B., Ozdemir, O., Karaagaclioglu, I.E., Celik, M.S., 2020. Effect of particle shape properties on selective separation of chromite from serpentine by flotation, Physicochemical Problems of Mineral Processing, 56 (5), 818–828.
  • Güven, O., Celik, M.S., Drelich, J., 2015. Flotation of methylated roughened glass particles and analysis of particle-bubble energy barrier, Minereals Engineering, 79, 125-132.
  • Güven, O., Çelik, M.S., 2016. Interplay of particle shape and surface roughness to reach maximum flotation efficiencies depending on collector concentration, Mineral Processing and Extractive Metallurgy Review, 37 (6), 412-417.
  • Güven, O., Karakas, F., Kodrazi, N., Çelik, M. S., 2017. Dependence of morphology on anionic flotation of alumina, International Journal of Mineral Processing, 156, 69-74.
  • Rahimi, M., Dehghani, F., Rezai, B., 2012. Influence of the roughness and shape of quartz particles on their flotation kinetics, International Journal of Minerals, Metallurgy and Materials, 19, 4, 284-289.
  • Rezai, B., Rahimi, M., Aslani, M.R., Eslamian, A., Dehghani F., 2010. Relationship between surface roughness of minerals and their flotation kinetics, In Proceedings of the XI International Mineral Processing and Technology Congress, 232-238.
  • Ulusoy, U., Yekeler, M., 2005. Correlation of the surface roughness of some industrial with their wettability parameters, Chemical Engineering and Processing, 44, 557-565.
  • Uysal, T., Guven O., Ozdemir, O., Karaagaclioglu, I.E., Tunç, B., Çelik, M.S., 2021. Contribution of particle morphology on flotation and aggregation of sphalerite particles, Minerals Engineering, 165, 106860.
  • Yekeler, M., Ulusoy, U., Hiçyılmaz, C., 2004. Effect of particle shape and roughness of talc mineral ground by different mills on the wettability and floatability, Powder Technology, 140 (1-2), 68-78.

Effect of Particle Roughness on Flotation and Aggregation of Galena Mineral

Yıl 2021, Cilt: 60 Sayı: 4, 209 - 217, 21.12.2021
https://doi.org/10.30797/madencilik.922988

Öz

Physical properties of particles such as particle size and particle morphology plays an important role on both particle-particle and particle-bubble interactions which makes them very important on evaluation of flotation processes. In this study, the contribution of roughness of galena particles produced as a function of abrasion time was investigated on their flotation recovery and aggregation characteristics. According to the results of experimental studies, it was found that the flotation and aggregation characteristics increased in proportion to their roughness value. As a result, it was determined that with the preferential production of particles, flotation can be made more efficient by shifting to lower collector concentrations.

Proje Numarası

117M659

Kaynakça

  • Chandra, A.P., Gerson, A.R., 2009. A review of the fundamental studies of the copper activation mechanisms for selective flotation of the sulfide minerals, sphalerite and pyrite, Advances in Colloid and Interface Science, 145 (1-2), 97-110.
  • Feng, D., Aldrich, C., 2000. A comparison of the flotation of ore from the Merensky Reef after wet and dry grinding, International Journal of Mineral Processing, 60 (2), 115–129.
  • Fuerstenau, D., Pradip, P., 2005. Zeta Potentials in the flotation of oxide and silicate minerals, Advances in Colloid and Interface Science, 114-115, 9-26.
  • Güven, O., Serdengecti, M.T., Tunc, B., Ozdemir, O., Karaagaclioglu, I.E., Celik, M.S., 2020. Effect of particle shape properties on selective separation of chromite from serpentine by flotation, Physicochemical Problems of Mineral Processing, 56 (5), 818–828.
  • Güven, O., Celik, M.S., Drelich, J., 2015. Flotation of methylated roughened glass particles and analysis of particle-bubble energy barrier, Minereals Engineering, 79, 125-132.
  • Güven, O., Çelik, M.S., 2016. Interplay of particle shape and surface roughness to reach maximum flotation efficiencies depending on collector concentration, Mineral Processing and Extractive Metallurgy Review, 37 (6), 412-417.
  • Güven, O., Karakas, F., Kodrazi, N., Çelik, M. S., 2017. Dependence of morphology on anionic flotation of alumina, International Journal of Mineral Processing, 156, 69-74.
  • Rahimi, M., Dehghani, F., Rezai, B., 2012. Influence of the roughness and shape of quartz particles on their flotation kinetics, International Journal of Minerals, Metallurgy and Materials, 19, 4, 284-289.
  • Rezai, B., Rahimi, M., Aslani, M.R., Eslamian, A., Dehghani F., 2010. Relationship between surface roughness of minerals and their flotation kinetics, In Proceedings of the XI International Mineral Processing and Technology Congress, 232-238.
  • Ulusoy, U., Yekeler, M., 2005. Correlation of the surface roughness of some industrial with their wettability parameters, Chemical Engineering and Processing, 44, 557-565.
  • Uysal, T., Guven O., Ozdemir, O., Karaagaclioglu, I.E., Tunç, B., Çelik, M.S., 2021. Contribution of particle morphology on flotation and aggregation of sphalerite particles, Minerals Engineering, 165, 106860.
  • Yekeler, M., Ulusoy, U., Hiçyılmaz, C., 2004. Effect of particle shape and roughness of talc mineral ground by different mills on the wettability and floatability, Powder Technology, 140 (1-2), 68-78.
Toplam 12 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Yer Bilimleri ve Jeoloji Mühendisliği (Diğer)
Bölüm Orijinal Araştırma
Yazarlar

Turan Uysal 0000-0003-1643-6725

İbrahim Ethem Karaağaçlıoğlu 0000-0002-2838-0514

Onur Güven 0000-0002-5267-9153

Proje Numarası 117M659
Yayımlanma Tarihi 21 Aralık 2021
Gönderilme Tarihi 20 Nisan 2021
Yayımlandığı Sayı Yıl 2021 Cilt: 60 Sayı: 4

Kaynak Göster

APA Uysal, T., Karaağaçlıoğlu, İ. E., & Güven, O. (2021). Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu ve Topaklanmasına Etkisi. Scientific Mining Journal, 60(4), 209-217. https://doi.org/10.30797/madencilik.922988
AMA Uysal T, Karaağaçlıoğlu İE, Güven O. Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu ve Topaklanmasına Etkisi. Mining. Aralık 2021;60(4):209-217. doi:10.30797/madencilik.922988
Chicago Uysal, Turan, İbrahim Ethem Karaağaçlıoğlu, ve Onur Güven. “Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu Ve Topaklanmasına Etkisi”. Scientific Mining Journal 60, sy. 4 (Aralık 2021): 209-17. https://doi.org/10.30797/madencilik.922988.
EndNote Uysal T, Karaağaçlıoğlu İE, Güven O (01 Aralık 2021) Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu ve Topaklanmasına Etkisi. Scientific Mining Journal 60 4 209–217.
IEEE T. Uysal, İ. E. Karaağaçlıoğlu, ve O. Güven, “Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu ve Topaklanmasına Etkisi”, Mining, c. 60, sy. 4, ss. 209–217, 2021, doi: 10.30797/madencilik.922988.
ISNAD Uysal, Turan vd. “Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu Ve Topaklanmasına Etkisi”. Scientific Mining Journal 60/4 (Aralık 2021), 209-217. https://doi.org/10.30797/madencilik.922988.
JAMA Uysal T, Karaağaçlıoğlu İE, Güven O. Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu ve Topaklanmasına Etkisi. Mining. 2021;60:209–217.
MLA Uysal, Turan vd. “Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu Ve Topaklanmasına Etkisi”. Scientific Mining Journal, c. 60, sy. 4, 2021, ss. 209-17, doi:10.30797/madencilik.922988.
Vancouver Uysal T, Karaağaçlıoğlu İE, Güven O. Tane Pürüzlülüğünün Galen Mineralinin Flotasyonu ve Topaklanmasına Etkisi. Mining. 2021;60(4):209-17.

Cited By

TANE ŞEKLİNİN GALEN MİNERALİNİN FLOTASYONU VE TOPAKLANMASINA ETKİSİ
Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi
https://doi.org/10.31796/ogummf.1070082