Araştırma Makalesi
BibTex RIS Kaynak Göster

Influence Of Different Ecoquench Temperature On High Carbon Steel Wire Mechanical Properties

Yıl 2018, Cilt: 2 Sayı: 1, 1 - 5, 31.12.2018

Öz

Patenting
heat treatment wires in the production of bead wire, spring wire, prestressed
concrete wire and wire rope provide suitable microstructural properties for
subsequent diameter reduction steps. The process of patenting in the fluidized
bed, which is a faster and more environmentally friendly process than the
conventional lead bath, is carried out in two stages: After heating to the
austenitizing temperature, a thin perlite structure is obtained after cooling
at the appropriate speeds in the fluid sand bed. Both high tensile strength and
ductility can be achieved by suitable patenting conditions. The effect of fluid
bed temperatures and cooling rate on the success of the process is of critical
importance. In this study, mechanical properties (tensile, elongation,
elongation ratio, torsion) and microstructure effects of different fluidized
bed temperatures for wt.%0,83 carbon wires at 3.5 mm diameter were
investigated.

Kaynakça

  • [1] R. Wright, Wire Technology, Second Edition: Process Engineering and Metallurgy B-H, (2011).
  • [2] I.A. Khvorova Materials Science, Tomsk Polytechnic University Publishing House (2012).
  • [3] S. D. Bhole, J. A. Friedman, Steel wire patenting: thermal and metallurgical comparison between quenching in lead and quenching in a fluidised bed, Int. Heat Treatment and Surface Eng. Vol4.,(2010), 152-155.
  • [4] A.M. Elwazri , P. Wanjara , S. Yue, The effect of microstructural characteristics of pearlite on the mechanical properties of hypereutectoid steel, Materials Sci. and Engineering A 404 (2005) 91–98.
  • [5] S. S. Bargujera,, N.M. Suria, R. M. Belokara, Pearlitic steel wire: High carbon steel based natural nanomaterial by lead patenting process, Materials Today: Proceedings 3 (2016) 1553–1562.
  • [6] S. Wiewiórowska, Z. Muskalski, The assessment of the structure and properties of high-carbon steel wires after the process of patenting with induction heating, Archieves of Metallurgy and Materials Vol. 60 (2015) 855-858.
Yıl 2018, Cilt: 2 Sayı: 1, 1 - 5, 31.12.2018

Öz

Kaynakça

  • [1] R. Wright, Wire Technology, Second Edition: Process Engineering and Metallurgy B-H, (2011).
  • [2] I.A. Khvorova Materials Science, Tomsk Polytechnic University Publishing House (2012).
  • [3] S. D. Bhole, J. A. Friedman, Steel wire patenting: thermal and metallurgical comparison between quenching in lead and quenching in a fluidised bed, Int. Heat Treatment and Surface Eng. Vol4.,(2010), 152-155.
  • [4] A.M. Elwazri , P. Wanjara , S. Yue, The effect of microstructural characteristics of pearlite on the mechanical properties of hypereutectoid steel, Materials Sci. and Engineering A 404 (2005) 91–98.
  • [5] S. S. Bargujera,, N.M. Suria, R. M. Belokara, Pearlitic steel wire: High carbon steel based natural nanomaterial by lead patenting process, Materials Today: Proceedings 3 (2016) 1553–1562.
  • [6] S. Wiewiórowska, Z. Muskalski, The assessment of the structure and properties of high-carbon steel wires after the process of patenting with induction heating, Archieves of Metallurgy and Materials Vol. 60 (2015) 855-858.
Toplam 6 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Malzeme Üretim Teknolojileri
Bölüm Research Articles
Yazarlar

Sevim Gökçe Esen

Ekrem Altuncu

Fatih Üstel Bu kişi benim

Serkan Savcıoğlu Bu kişi benim

Yayımlanma Tarihi 31 Aralık 2018
Yayımlandığı Sayı Yıl 2018 Cilt: 2 Sayı: 1

Kaynak Göster

APA Esen, S. G., Altuncu, E., Üstel, F., Savcıoğlu, S. (2018). Influence Of Different Ecoquench Temperature On High Carbon Steel Wire Mechanical Properties. Acta Materialia Turcica, 2(1), 1-5.
AMA Esen SG, Altuncu E, Üstel F, Savcıoğlu S. Influence Of Different Ecoquench Temperature On High Carbon Steel Wire Mechanical Properties. ACTAMAT. Aralık 2018;2(1):1-5.
Chicago Esen, Sevim Gökçe, Ekrem Altuncu, Fatih Üstel, ve Serkan Savcıoğlu. “Influence Of Different Ecoquench Temperature On High Carbon Steel Wire Mechanical Properties”. Acta Materialia Turcica 2, sy. 1 (Aralık 2018): 1-5.
EndNote Esen SG, Altuncu E, Üstel F, Savcıoğlu S (01 Aralık 2018) Influence Of Different Ecoquench Temperature On High Carbon Steel Wire Mechanical Properties. Acta Materialia Turcica 2 1 1–5.
IEEE S. G. Esen, E. Altuncu, F. Üstel, ve S. Savcıoğlu, “Influence Of Different Ecoquench Temperature On High Carbon Steel Wire Mechanical Properties”, ACTAMAT, c. 2, sy. 1, ss. 1–5, 2018.
ISNAD Esen, Sevim Gökçe vd. “Influence Of Different Ecoquench Temperature On High Carbon Steel Wire Mechanical Properties”. Acta Materialia Turcica 2/1 (Aralık 2018), 1-5.
JAMA Esen SG, Altuncu E, Üstel F, Savcıoğlu S. Influence Of Different Ecoquench Temperature On High Carbon Steel Wire Mechanical Properties. ACTAMAT. 2018;2:1–5.
MLA Esen, Sevim Gökçe vd. “Influence Of Different Ecoquench Temperature On High Carbon Steel Wire Mechanical Properties”. Acta Materialia Turcica, c. 2, sy. 1, 2018, ss. 1-5.
Vancouver Esen SG, Altuncu E, Üstel F, Savcıoğlu S. Influence Of Different Ecoquench Temperature On High Carbon Steel Wire Mechanical Properties. ACTAMAT. 2018;2(1):1-5.