The scope of this study, is to
determine the effectiveness of using rivets in the adhesive joints in order to
combine plastic based composite materials which are often used in today's
engineering structures, to the joint strength. For this purpose, double lap
joints are prepared in 3 different types of configuration included adhesive,
pinned and both adhesive and pinned and also prepared in 3 different overlap
lengths as 30, 45 and 60 mm. Stress-strain diagrams were derived by exposing
the joints obtained, to the axial tensile test and then the most appropriate
joint type was determined by comparing each of the results obtained. The
evaluation of the results pointed out that the hybrid joints where adhesive and
rivet are used together, can carry much more load than the joints where only
adhesive was used or the joints which are combined with rivet in terms of joint
strength.
Konular | Mühendislik |
---|---|
Bölüm | Araştırma Makalesi |
Yazarlar | |
Yayımlanma Tarihi | 31 Mart 2018 |
Yayımlandığı Sayı | Yıl 2018 Cilt: 19 Sayı: 1 |