Year 2018, Volume 20, Issue 3, Pages 519 - 524 2018-12-15

Çevre Dostu Madde Kullanılarak Isıl İşlemli Örneklerin Yanma Dirençlerinin İyileştirilmesi
Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance

AHMET CAN [1] , Wojciech Grzeskowiak [2] , İsmail Özlüsoylu [3]

40 161

Ahşap malzemelerin avantajlarının yanında en büyük dezavantajları alevlenmeleri ve yanmalarıdır. Odunun bu negatif özelliği çevre dostu maddeler kullanılarak azaltılabilir. Bu çalışmada, çam (Pinus sylvestris L.) odun örnekleri,% 2.5 ve % 5'lik konsantrasyonlarda borik asit ile emprenye edildikten sonra 120 dakika süreyle, 210 ° C'de ısıl işleme tabi tutulmuşlardır. Bor ve ısıl işlem kombinasyonunun odunun yanma performansı üzerine etkisi maksimum sıcaklık ve ağırlık kaybı üzerinden hesaplanmıştır. Mini Fire Tube (MFT) test sonuçlarına göre kontrol örneklerinde% 99,99 ağırlık kaybı gözlenirken, % 5 BA ve % 5 BA + Isıl işlemli örneklerde sırasıyla % 38,36 ve % 52,24 ağırlık kaybı gözlenmiştir. % 2,5 BA + Isıl işlem ve % 5 BA + Isıl işlemli örnekler 160 saniyede maksimum ağırlık kaybına ulaşmıştır. % 5 BA emprenyeli örneklerde maksimum sıcaklık 444,73 ºC'ye yükselirken,% 2.5 BA + Isıl işlemdeki maksimum sıcaklık 227,9 ºC’de kalmıştır.
The greatest risk of wood structures with many advantages is there ignition and burning. Negative property of wood can be reduced by using environmentally friendly substance. In this study, pine (Pinus sylvestris L.) wood samples were heat-treated at 210 ° C for 120 minutes after impregnation with boric acid in concentrations of 2.5% and 5%. Fire performance of the combination of boric acid (BA) and heat treatment was calculated from maximum temperature and weight loss. According to Mini Fire Tube (MFT) test results, 99,99% weight loss was observed in the control samples, while 38,36% and 52,24% weight loss were observed in 5% BA and 5% BA+Heat treatment respectively. 2.5% BA+Heat treatment and 5% BA+Heat treatment samples reached maximum weight loss in 160 seconds. While the maximum temperature increased to 444,73 ºC in 5% BA impregnated samples, it remained at 227.9 ºC in 2.5% BA + heated samples.
  • ASTM-D, 1976. Standard Test Method of Testing Wood Preservatives by Laboratory Soilblock Cultures, 1413-76, Annual Book of ASTM Standards, Philadelphia, 452-460.
  • ASTM E 69, (2002). Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus, ASTM International, West Conshohocken, PA.
  • Baysal, E. 2002. Determination of oxygen index levels and thermal analysis of scots pine impregnated melamine formaldehyde-boron combinations, Journal of Fire Sciences. 20(9), 373-389.
  • Can, A. (2011). Endüstriyel Ölçekli Isıl Işlem ve Borlu Bileşiklerle Emprenyenin Odunun Bazı, Fiziksel, Mekanik ve Biyolojik Özelliklerine Etkisi. Yüksek Lisans Tezi, KTÜ Fen Bilimleri Enstitüsü, Trabzon.
  • Fengel, D. and Wegener, G. (1989). Wood: Chemistry, Ultrastructure, Reactions. Walter De Gruyter, Berlin /New York, 3(9):333–335.
  • Fogel, J.L. and Lloyd, J.D. (2002). Mold Performance of Some Construction Products with and without Borates, Forest Products Journal, 52, 2, 38-43.
  • Gündüz, G., Korkut, S., Korkut, D.S. (2008). The effects of heat treatment on physical and technological properties and surface roughness of Camiyanı Black Pine (Pinus nigra Arn. subsp. pallasiana var. pallasiana) wood. Bioresour. Technol. 99(7): 2275-2280.
  • İstek, A., and Özlüsoylu, İ. (2016). The Effect of Using Siriono and Boric Acid on the Combustion Performance in Particleboard Production. International Forestry Symposium (IFS 2016), 07-10 December 2016, Kastamonu/TURKEY
  • Kartal, S.N. and Imamura, Y. (2004). Borlu Bileşiklerin Emprenye Maddesi Olarak Ağaç Malzeme ve Kompozitlerde Kullanımı, 3. Uluslararası Bor Sempozyumu, Eylül, Eskişehir, Bildiriler Kitabı: 333-338
  • Kamdem, D.P., Pizzi, A., Triboulot, M.C. (2000). Heat-treated timber: potentially toxic byproducts presence and extent of wood cell wall degradation. Holz Roh Werkst. 58: 253-257
  • Levan, S.L. and Tran, H.C. (1990). The Role of Boron in Flame-Retardant Treatments, in: Hamel, Margaret, Ed. 1st International Conference on Wood Protection With Diffusible Preservatives: Proceedings 47355; 1990 November, Nashville, TN. Madison, WI: Forest Products Research Society; 39-41.
  • Tomak, E.D. (2011). Masif Odundan Bor Bileşiklerinin Yıkanmasını Önlemede Yağlı Isıl İşlemin ve Emülsiyon Teknikleri ile Emprenye İşleminin Etkisi. Doktora Tezi, Karadeniz Teknik Üniversitesi.
  • TS 2470. (1976). Wood - sampling methods and general requirements for physical and mechanical tests. TSE, Ankara URL-1 (2018). http://www.boren.gov.tr/en/boron/areas-of-application/flame-retardants
  • Yalınkılıç, M. K., Baysal, E., Demirci, Z. 1997. Fire resistance of calabrian pine (Pinus brutia (Ten.)) wood treated with some boron compounds and or water repellents. Turkish. Journal of Agriculture and Foresty, Vol 4: 423-431
  • Yamaguchi, H. (2003). Silicic Acid: Boric Acid Complex as Wood Preservatives, Wood Science and Technology, 37, 287-297.
  • Yıldız, S. (2002). Isıl işlem uygulanan Doğu Kayını ve Doğu Ladini Odunlarının Fiziksel Teknolojik ve Kimyasal Özellikleri, Doktora Tezi, K.T.Ü., Fen Bilimleri Enstitüsü, Trabzon.
Primary Language en
Subjects Science
Journal Section Biomaterial Engineering, Bio-based Materials, Wood Science
Authors

Orcid: 0000-0001-5926-6039
Author: AHMET CAN (Primary Author)
Institution: Bartın Üniversitesi Orman Fakültesi, Bartın
Country: Turkey


Author: Wojciech Grzeskowiak
Country: Poland


Author: İsmail Özlüsoylu
Institution: Bartın Üniversitesi Orman Fakültesi, Bartın
Country: Turkey


Dates

Publication Date: December 15, 2018

Bibtex @research article { barofd466141, journal = {Bartın Orman Fakültesi Dergisi}, issn = {1302-0943}, eissn = {1308-5875}, address = {Bartin University}, year = {2018}, volume = {20}, pages = {519 - 524}, doi = {}, title = {Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance}, key = {cite}, author = {CAN, AHMET and Grzeskowiak, Wojciech and Özlüsoylu, İsmail} }
APA CAN, A , Grzeskowiak, W , Özlüsoylu, İ . (2018). Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance. Bartın Orman Fakültesi Dergisi, 20 (3), 519-524. Retrieved from http://dergipark.org.tr/barofd/issue/38873/466141
MLA CAN, A , Grzeskowiak, W , Özlüsoylu, İ . "Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance". Bartın Orman Fakültesi Dergisi 20 (2018): 519-524 <http://dergipark.org.tr/barofd/issue/38873/466141>
Chicago CAN, A , Grzeskowiak, W , Özlüsoylu, İ . "Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance". Bartın Orman Fakültesi Dergisi 20 (2018): 519-524
RIS TY - JOUR T1 - Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance AU - AHMET CAN , Wojciech Grzeskowiak , İsmail Özlüsoylu Y1 - 2018 PY - 2018 N1 - DO - T2 - Bartın Orman Fakültesi Dergisi JF - Journal JO - JOR SP - 519 EP - 524 VL - 20 IS - 3 SN - 1302-0943-1308-5875 M3 - UR - Y2 - 2018 ER -
EndNote %0 Journal of Bartin Faculty of Forestry Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance %A AHMET CAN , Wojciech Grzeskowiak , İsmail Özlüsoylu %T Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance %D 2018 %J Bartın Orman Fakültesi Dergisi %P 1302-0943-1308-5875 %V 20 %N 3 %R %U
ISNAD CAN, AHMET , Grzeskowiak, Wojciech , Özlüsoylu, İsmail . "Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance". Bartın Orman Fakültesi Dergisi 20 / 3 (December 2018): 519-524.
AMA CAN A , Grzeskowiak W , Özlüsoylu İ . Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance. Bartın Orman Fakültesi Dergisi. 2018; 20(3): 519-524.
Vancouver CAN A , Grzeskowiak W , Özlüsoylu İ . Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance. Bartın Orman Fakültesi Dergisi. 2018; 20(3): 524-519.