TY - JOUR T1 - Development of Salt Core Use Alternative in Aluminum Alloy Casting Parts AU - Hancerlioglu, Tulay PY - 2021 DA - June DO - 10.18466/cbayarfbe.1033177 JF - Celal Bayar University Journal of Science JO - CBUJOS PB - Manisa Celal Bayar University WT - DergiPark SN - 1305-130X SP - 141 EP - 147 VL - 18 IS - 2 LA - en AB - For creating complex geometric shapes in the cast part, salt was used to produce core instead of sand which is thermo-chemical or chemical process using resin as a binder.In salt core casting, the efficiency will be increased by reducing the core gas-induced errors in the part. The harmful effect on the environment will be reduced with the absence of odor and smoke from the core gas.Using water in salt core breaking instead of mechanical impact and vibration during sand core breaking will bring benefits such as eliminating the noise source and using less energy. By eliminating the dust generated during sand core breaking, its harmful effects on the environment will be reduced. Since the salt core can be dissolved in water and removed from the piece without any residue, there will be no problem of sand remaining in the sand core from time to time. KW - core gas KW - KW - sand core KW - salt core CR - [1]. Brůna, M., Sládek, A. & Kucharčík, L. (2012). Formation of porosity in Al-Si alloys. Archives of Foundry Engineering. 12(1), 5-8. DOI: 10.2478/v10266-012-0001-5. CR - [2]. Lichý, P., Bednářová, V. & Elbel, T. (2012). Casting routes for porous metals production. Archives of Foundry Engineering. 12(1), 71-74. DOI: 10.2478/v10266-012- 0014-0. CR - [3]. Dańko, J., Dańko, R. (2009). Theoretical and technological aspects of the production processes of foundry cores blown In 50. Konferencji Krzepniecie i Krystalizacja Metali (pp. 71-86). Katowice – Gliwice, Poland: Polska Academia Nauk, Komisja Odlewnictwa. ISBN: 978-83-929266-0-3. (in Polish) CR - [4]. Fuchs, B., Eibisch, H. & Körner, C. (2013). Core viability simulation for salt core technology in high – pressure die casting. International Journal of Metalcasting. 7(3), 39-45. ISSN: 1939-5981 CR - [5]. Stingl, P., & Shiller, G. (2009). Gichte und rückstandfreie Entkernung – Salzkerne für den Aluminiumguss. Giesserei- Erfahrungsaustausch. 6, 4-8. CR - [6]. Adámková, E., Jelínek, P., & Študentová, S. (2013). Application of cooking salts in manufacture of water soluble cores for high pressure die . Materials and technology. 61(11-12), 689-693. ISSN: 1580-2949, 1580-3414. CR - [7]. P. Jelínek, E. Adámková “ Lost Cores for High-Pressure Die Casting” Department of Metallurgy and Foundry Engineering, VŠB-Technical University of Ostrava DOI:10.2478/afe-2014-0045 CR - [8]. P. Jelínek, E. Adámková *, F. Mikšovský, J. Beňo Advance in Technology of Soluble Cores for Die Castings, Department of Metallurgy and Foundry, VŠB – Technical University of Ostrava ISSN (1897-3310) Volume 15 Issue 2/2015 29-34 CR - [9]. Eliska Adámková, Petr Jelínek, Jaroslav Beòo Frantiek Mik{ovský, Water-Soluble Cores-Verifying Development Trends, V[B-Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Department of Metallurgy and Foundry,ISSN 1580-2949 MTAEC9,49(1)61(2015) CR - [10]. Mr. Vijaykumar A. Radadiya, Dr. Komal G. Dave, Mr. Kalpeshkumar R. Patel, Design and Analysis of Salt Core for a Casting of Alüminium Alloys Core casting, International Journal Of Advance Engineering and Research Development Valume 2,Issue 3-2015 CR - [11]. Jun Yaoka wa, Daisuke Miura, Koichi Anzai1, Youji Ya mada and Hiroshi Yoshii, “Strength of Salt Core Composed of Alkali Carbonate and Alkali Chloride Mixtu res Made by Casting” Journal of Technique Mate rials Transactions, Vo l. 48, No. 5 (2007) pp. 1034 to 1041,Japan Foundry Engineering Society [12]. Petr Jelinek, Frantisek Miksovsky, Jaroslav Beoo, Eliska Adamkova, “ Development of Foundry Cores Based On Inorganic Salts” MTAEC9, 47(6)689(2013), ISSN 1580-2949 CR - [13]. Bühler AG: Lost Core - An Industrial Process Path for High-Quality Salt Cores. https://www.foundry-planet.com (Date of access: 25.06.2021) UR - https://doi.org/10.18466/cbayarfbe.1033177 L1 - https://dergipark.org.tr/en/download/article-file/2117967 ER -