TY - JOUR T1 - Process Improvement Study in a Tire Factory AU - Arslankaya, Seher AU - Demir, Asude PY - 2023 DA - June Y2 - 2023 DO - 10.22399/ijcesen.1289121 JF - International Journal of Computational and Experimental Science and Engineering JO - IJCESEN PB - İskender AKKURT WT - DergiPark SN - 2149-9144 SP - 111 EP - 122 VL - 9 IS - 2 LA - en AB - Today, motorsports is one of the sports branches with the world's largest audience and fan base. The production techniques of the tires used in these organizations are an indispensable factor in order to be the pioneer of the sector. In this study, SWOT Analysis and Failure Modes and Effects Analysis were performed for two different production lines, and the superiority of the lines against each other was evaluated. The process to be improved on the excellent line was determined as a result of brainstorming by an expert team. After the changed parameters, the effects on the final product and the process were evaluated. The study was concluded by determining that all the changes made do not constitute an obstacle to the continuity of the process and the quality of the final product. Time analysis was made by video recording the process whose cycle time changed. As a result of the calculations made after the time analysis, the annual tire gain was calculated as 7299. KW - Cycle time KW - SWOT analysis KW - Failure modes and effects analysis KW - Time analysis KW - Brainstorming KW - Process improvement CR - [1] Krajewski, L. J., Rıtzman L. P. and Malhotra M. K. (2014). Üretim yönetimi süreçler ve tedarik zincirleri (9. Ed), (S. Birgün, Trans.), Nobel publications, Ankara. https://books.google.com.tr/books/about/%C3%9Cretim_y%C3%B6netimi.html?id=G5JqngEACAAJ&redir_esc=y CR - [2] Kirkham, L., Garza-Reyes, J. A., Kumar, V. and Antony J. (2014). Prioritisation of operations ımprovement projects in the europan manufacturing ındustry. International Journal of Production Research, 52(18); 5323-5345. Doi: 10.1080/00207543.2014.903345 CR - [3] Patel N., Chauhan N. and Trivedi P. (2015). Benefits of value stream mapping as a lean tool ımplementation manufacturing ındustries: a review. International Journal for Innovative Research in Science & Technology, 1(8); 53-57. http://www.ijirst.org/articles/IJIRSTV1I8017.pdf CR - [4] Türkan, T. and Görener, A. (2017). Süreç iyileştirme: vasıflı çelik üretim sektöründe bir uygulama, Optimum Ekonomi ve Yönetim Bilimleri Dergisi, 4(2); 23-40. Doi: https://doi.org/10.17541/optimum.282050 CR - [5]Gupta, A., Singh, R.K. and Suri P.K. (2018). Sustainable service quality management by logistics service providers: an ındian perspective, Global Business Review, 19(3); 130-150. Doi: https://doi.org/10.1177/0972150918758098 CR - [6] Avunduk, H. (2019). Yalın altı sigma: bir pet şişirme makinesinde süreç iyileştirme uygulaması, Elektronik Sosyal Bilimler Dergisi, 18(70); 633-653. Doi: https://doi.org/10.17755/esosder.428802 CR - [7] Sevgili, A. and Antmen, Z. F. (2019). Yalın üretim tekniklerinden değer akış haritalandırmanın bir metal işleme fabrikasında süreç iyileştirme amacıyla uygulanması, Avrupa Bilim ve Teknoloji Dergisi, 16, 219-228. Doi: https://doi.org/10.31590/ejosat.555940 CR - [8] Apilioğulları, L. (2020). Yalın altı sigma ve endüstri 4.0 entegrasyonu ile kalite iyileştirme vaka çalışması, Anemon Muş Alparslan Üniversitesi Sosyal Bilimler Dergisi, 8(5); 1497-150. https://dergipark.org.tr/tr/pub/anemon/issue/57135/640553 CR - [9] Sarı, İ., Sergi, D. and Özuduruk, S. F. (2020). Müşteri hizmetleri bölümünde süreç analizi ve stratejik planlama lastik sektöründe bir uygulama, Eskişehir Teknik Üniversitesi Bilim Ve Teknoloji Dergisi, 8(2); 191-211. Doi: https://doi.org/10.20290/estubtdb.604569 CR - [10] Berber, G. and Deste, M. (2018). Süreç iyileştirme uygulamaları üzerine bir literatür araştırması, Uluslararası Ekonomi, İşletme ve Politika Dergisi, 2(2); 213-230. Doi: https://doi.org/10.29216/ueip.462265 CR - [11] Özan, M. (2021). Süreç yönetimi ve süreç iyileştirmenin işletme performansına etkilerinin analizi. İşletme Araştırmaları Dergisi, 13(2), 1144-1161. Doi:https://doi.org/10.20491/isarder.2021.1189 CR - [12] Çelik, H. (2020). Süreç iyileştirmede kaizen ve kaikaku uygulamasi. Avrasya Sosyal ve Ekonomi Araştırmaları Dergisi, 7(4), 245-259. https://dergipark.org.tr/en/pub/asead/issue/54055/708375#article_cite CR - [13] Oskaloğlu, E. (2019). Üretim işletmelerinde süreç iyileştirme tekniklerinin kullanılabilirliği üzerine bir araştırma (Master's thesis, İnönü Üniversitesi Sosyal Bilimleri Enstitüsü). http://abakus.inonu.edu.tr/xmlui/handle/11616/15071 CR - [14] Sütçü, A., Karşıyaka, O. & Burhan, M. E. (2019). Bir mobilya üretim tesisinde iş analizi ve benzetim uygulaması ile süreç verimliliğinin artırılması. Avrupa Bilim ve Teknoloji Dergisi, (17). 45-57. DOI: 10.31590/ejosat.609563 CR - [15] Uluskan, M. (2019). Süreç yeterlilik analizinin genişletilmiş kaizen yöntemine entegrasyonu: otomotiv sektöründe bir uygulama. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, 27(3), 165-183. DOI: 10.31796/ogummf.581278 CR - [16] Yildiz, B., & Sayin, B. (2019). Süreç Yönetiminin Ürün İnovasyon Performansı Üzerindeki Etkisinde Rekabet Yoğunluğunun Düzenleyici Rolü. Business and Economics Research Journal, 10(2), 575-586. https://www.ceeol.com/search/article-detail?id=762619 CR - [17] Selimoğlu, S. K., Yeşilçelebi, G., & Altunel, M. (2021). İç denetim süreçlerini iyileştirme ve risk yönetimi araçları: Yalın altı sigma ve FMEA. Muhasebe ve Finansman Dergisi, 201-218. Doi: https://doi.org/10.25095/mufad.950760 CR - [18] Akkurt, I Basyigit C., Kilincarslan S., Beycioglu, A. 2010. Prediction of photon attenuation coefficients of heavy concrete by fuzzy logic. Journal of the Franklın Instıtute-Engıneerıng and Applıed Mathematıcs. 347(9);1589-1597. DOI: 10.1016/j.jfranklin.2010.06.002 CR - [19] Arslankaya, S. and Çelik, M. T. (2021). Prediction of Heart Attack Using Fuzzy Logic Method and Determination of Factors Affecting Heart Attacks. International Journal of Computational and Experimental Science and Engineering, 7(1); 1-8. https://doi.org/10.22399/ijcesen.837731 CR - [20] Basyigit, C, Akkurt I, Kilincarslan S. and Beycioglu A. (2010). Prediction of compressive strength of heavyweight concrete by ANN and FL models. Neural Computıng & Applıcatıons 19(4);507-513 DOI: 10.1007/s00521-009-0292-9 CR - [21] Caymaz, T., Çalışkan, S. and Botsalı, A.R. (2022). Evaluation of Ergonomic Conditions using Fuzzy Logic in a Metal Processing Plant. International Journal of Computational and Experimental Science and Engineering, 8(1); 9-24 https://doi.org/10.22399/ijcesen.932994 CR - [22] Çilli, A., Beken, M. and Kurt, N. 2022. Determination of Theoretical Fracture Criteria of Layered Elastic Composite Material by ANFIS Method from Artificial Intelligence. International Journal of Computational and Experimental Science and Engineering, 8(2); 32-39. https://doi.org/10.22399/ijcesen.1077328 CR - [23] Akkurt, İ. Boodaghi Malidarreh P. and Boodaghi Malidarre R.,., (2021): Simulation and Prediction the Attenuation Behavior of the KNN-LMN Based Lead Free Ceramics by FLUKA Code and Artificial Neural Network (ANN) - Based Algorithm, Environmental Technology, DOI: 10.1080/09593330.2021.2008017 CR - [24] Boodaghi Malidarre R., Akkurt İ, Boodaghi Malidarreh P. and Arslankaya S. (2022). Investigation and ANN-based prediction of the radiation shielding, structural and mechanical properties of the Hydroxyapatite (HAP) bio-composite as artificial bone. Radiation Physics and Chemistry. 197;110208. https://doi.org/10.1016/j.radphyschem.2022.110208 CR - [25] Ural, A. and Kilimci, Z. H. (2021). The Prediction of Chiral Metamaterial Resonance using Convolutional Neural Networks and Conventional Machine Learning Algorithms. International Journal of Computational and Experimental Science and Engineering, 7 (3); 156-163 . https://doi.org/10.22399/ijcesen.973726 CR - [26] Ecer, B. , Aktas, A. , Kabak, M. and Dağdeviren, M. (2020). Determining the Best Maternity Hospital by Using a Fuzzy Decision Making Model. International Journal of Computational and Experimental Science and Engineering, 6(1); 7-12. https://doi.org/10.22399/ijcesen.646157 CR - [27] Kırelli, Y., Arslankaya, S., Alcan, P. (2022). MRI Image Analysis with Deep Learning Methods in Brain Tumor Diagnosis. In: Sen, Z., Oztemel, E., Erden, C. (eds) Recent Advances in Intelligent Manufacturing and Service Systems. Lecture Notes in Mechanical Engineering. Springer, Singapore. Print ISBN 978-981-16-7163-0Online ISBN 978-981-16-7164-7 https://doi.org/10.1007/978-981-16-7164-7_4 CR - [28] Çelik M.T. and Arslankaya S. (2023). Analysis of Quality Control Criteria in An Business With The Fuzzy Dematel Method: Glass Business Example. Journal of Engineering Research. 11(2);100039, https://doi.org/10.1016/j.jer.2023.100039 CR - [29] Boodaghi Malidarre R., Arslankaya S., Nar M., Kırelli Y., Erdamar I.Y.D., Karpuz N., Ozhan Dogan S. and Boodaghi Malidarre P. (2022). Deep learning prediction of gamma-ray-attenuation behavior of KNN–LMN ceramics. Emerging Materials Research 11(2);276-282 https://doi.org/10.1680/jemmr.22.00012 CR - [30] Imamoglu, M.Y., Akkurt, I., Arslankaya, S. et al. (2022). Prediction of radiation shielding properties for concrete by artificial neural networks. Eur. Phys. J. Plus 137;865 https://doi.org/10.1140/epjp/s13360-022-02815-3 CR - [31] Teke Ç., Akkurt İ., Arslankaya S., Ekmekci, İ and Gunoglu K. (2023). Prediction of gamma ray spectrum for 22Na source by feed forward back propagation ANN model. Radiation Physics and Chemistry, 202;110558, https://doi.org/10.1016/j.radphyschem.2022.110558 CR - [32] A. Bakeer, I. S. Mohamed, P. Boodaghi Malidarreh, I. Hattabi and L. Liu, (2022). An Artificial Neural Network-Based Model Predictive Control for Three-Phase Flying Capacitor Multilevel Inverter. in IEEE 10;70305-70316, 2022, doi: 10.1109/ACCESS.2022.3187996. CR - [33] Kırelli Y. and Arslankaya S. (2020). Sentiment Analysis of Shared Tweets on Global Warming on Twitter with Data Mining Methods: A Case Study on Turkish Language. Computational Intelligence and Neuroscience 2020;1904172 https://doi.org/10.1155/2020/1904172 CR - [34] Erol, Y. (2019). Stratejik yönetimde swot analizi ve bir işletmede uygulanması, Master’s thesis, İstanbul Kultur University. https://acikerisim.iku.edu.tr/entities/publication/30df3ecb-6b5f-4544-9046-ed9e30d74a75 CR - [35] Turan, M. and Ocaktan, D. (2019). Transformatör üreten bir firmada risk analizinde bulanık htea kullanımı ve uygulama yazılımı geliştirme, Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 21(1); 474-487. Doi: https://doi.org/10.25092/baunfbed.549171 CR - [36] Berber, G. and Deste, M. (2021). Bir gıda işletmesinde süreç iyileştirme uygulaması: dondurma fabrikasi örneği, Anadolu Üniversitesi İktisadi ve İdari Bilimler Fakültesi Dergisi, 22(3); 53-72. Doi: https://doi.org/10.53443/anadoluibfd.959147 CR - [37] Kaya, D.Ş. (2017). Root cause analysıs: examples of scenarıo, Gümüşhane University Journal Of Health Sciences, 6(4); 247-251. https://search.trdizin.gov.tr/tr/yayin/detay/285749/root-cause-analysis-examples-of-scenario UR - https://doi.org/10.22399/ijcesen.1289121 L1 - https://dergipark.org.tr/en/download/article-file/3109297 ER -