@article{article_1434205, title={Effect of adhesive thickness and loading speed on bonding strength in single-lap adhesive joints with aluminum 5754-H111}, journal={Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi}, volume={26}, pages={420–430}, year={2024}, DOI={10.25092/baunfbed.1434205}, author={Işıktaş, Ali and Balikoglu, Fatih and Demircioğlu, Tayfur Kerem}, keywords={Adhesive bonding, adhesive thickness, loading speed, single-lap joint}, abstract={This study provides shear test results of single-lap adhesive joints with aluminum 5754-H111. To investigate the effect of adhesive thickness on joint strength in single-lap adhesive joints, three different thicknesses (0.2, 1, and 2 mm) were applied. Increasing the adhesive thickness from 0.2 mm to 1 mm and from 0.2 mm to 2 mm resulted in a reduction in shear load of roughly 36% and 44%, respectively. It has been observed that the joint strength decreases with increasing adhesive thickness in single-lap adhesive joints with aluminum 5754-H111. In addition, single-lap adhesive joints were tested at various loading rates (1, 10, and 100 mm/min), and the influence of loading speed on adhesive strength was studied. The shear load increased with the loading speed in the test results of single-lap adhesive joints.}, number={2}, publisher={Balıkesir University}, organization={Research Fund of Balıkesir University}