TY  - JOUR
T1  - Demir Tozu Katkılı Akrilonitril Bütadien Stiren (ABS) Polimer Kompozitinin Özellikleri
TT  - Properties of Iron Powder Added Acrylonitrile Butadiene Styrene (ABS) Polymer Composite
AU  - Taşdemir, Münir
AU  - Ulutaş, Elif
PY  - 2025
DA  - June
Y2  - 2025
DO  - 10.29109/gujsc.1504065
JF  - Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji
JO  - GUJS Part C
PB  - Gazi University
WT  - DergiPark
SN  - 2147-9526
SP  - 431
EP  - 439
VL  - 13
IS  - 2
LA  - tr
AB  - Bu çalışmada; demir tozunun akrilonitril bütadien stiren (ABS)  üzerindeki etkisi araştırılmıştır. Demir tozu hacimce % 3 - 6 ve 9 oranlarında katılmış ve demir tozunun farklı oranlarda ilavesi ile akrinonitril bütadien stirenin fiziksel, mekanik ve ısısal özelliklerindeki değişimler incelenmiştir. ABS polimer kompozitleri çift vidalı ekstrüderde eriyik karıştırma metoduyla karıştırılmış ve ardından granül haline getirilmiştir. Enjeksiyon makinesinde test numuneleri basılarak elastisite modülü, çekme & kopma mukavemeti, % uzama, Izod çentikli darbe mukavemeti, Shore sertlik değeri, yoğunluk, erime akış indeksi (MFI), ısıl çarpılma sıcaklığı (HDT) ve vicat yumuşama sıcaklığı testleri yapılmıştır.  Bunlara ek olarak ABS matrisi içerinde demir tozlarının dağılımlarının tespit etmek SEM incelemesi yapılmıştır. Testler sonucunda demir tozu ilavesiyle; elastisite modülü, shore sertlik, yoğunluk, MFI, HDT ve vicat yumuşama sıcaklık değerlerinde artış buna karşılık çekme & kopma mukavemeti, % uzama ve İzod çentikli darbe mukavemeti değerlerinde düşüş tespit edilmiştir. SEM incelemesi sonucunda demir partiküllerinin homojen dağıldığı tespit edilmiştir.
KW  - Akrilonitril bütadien stiren
KW  - demir tozu
KW  - mekanik özellikler
KW  - polimer kompoziti
KW  - fiziksel özellikler.
N2  - In this study; the effect of iron powder on acrylonitrile butadiene styrene (ABS) was investigated. Iron powder was added at the rates of 3 - 6 and 9% by volume, and the changes in the physical, mechanical and thermal properties of acrylonitrile butadiene styrene were examined by adding iron powder at different rates. ABS polymer composites melt mixing in twin screw extruder method and then turned into granules. Test samples were molded in the injection machine and modulus of elasticity, tensile & breaking strength, % elongation, Izod notched impact strength, Shore hardness value, density, melt flow index (MFI), thermal distortion temperature (HDT) and Vicat softening temperature tests were performed. In addition, SEM examination was carried out to determine the distribution of iron powders in the ABS matrix. As a result of the tests, with the addition of iron powder; an increase in the elasticity modulus, shore hardness, density, MFI, HDT and Vicat softening temperature values was detected, whereas a decrease was detected in the tensile & breaking strength, % elongation and Izod notched impact strength values. As a result of SEM examination, it was determined that the iron particles were distributed homogeneously.
CR  - [1] Güldaş A, Temel S. Alüminyum tozu takviyeli polipropilenin takviye oranına göre mekanik özellikleri, 1st International Symposium on Plastic and Rubber Technologies and Exhibition, Ankara, (2013).
CR  - [2] Niksad M, Masood SH, Sbarski I. and Groth A. A study of melt flow analysis of an ABS-Iron composite in fused deposition modelling process, Tsinghua Science & Technology, 14,  (29-37), (2009).
CR  - [3] Hanemann T. and Honnef, K. Rheological investigations on the flow behavior of polymer-microsized iron powder composites, Polymer Composites, 30(8), (1114-1118), (2009).
CR  - [4] Güldaş A. Temel S. Altuğ M. Alüminyum tozu katkılı polipropilenin ergiyik akış indeksi özelliklerinin incelenmesi, Journal of Polytechnic, 20(1), (51-59),  (2017).
CR  - [5] Güngör A. Mechanical properties of iron powder filled high density polyethylene composites, Materials & Design, 28(3), (1027-1030), (2007).
CR  - [6] Taşdemir M. and Gülsoy HÖ. Physical and mechanical properties of iron powder filled, polymer-plastics technology and engineering, 45, 12, (2006).
CR  - [7] Saude N, Ibrahim M and Ibrahim MHI. Mechanical properties of highly filled iron-ABS composites in injection molding for FDM wire filament,  Materials Science Forum. Vol:773-774, (456-461), Trans Tech Publications Ltd. (2014).
CR  - [8] Gülsoy HÖ, and Taşdemir M. Physical and mechanical properties of polypropylene reinforced with Fe particles, International Journal of Polymeric Materials, 55, 619–626 (2006).
CR  - [9] Chawla K, Singh R, Singh J, and Mehta H. Investigations on mechanical properties of secondary recycled ABS reinforced with Fe powder for 3D printing applications,  Materials Today: Proceedings, 50(5),  (2450-2454), (2022).
CR  - [10] Gülsoy HÖ and Taşdemir M.   The effect of bronze particles on the physical and mechanical properties of acrylonitrile-butadiene-styrene copolymer, Polymer-Plastics Technology and Engineering, 46, (789–793),  (2007).
CR  - [11] Taşçı G. Zeren M. Metal katkılı polimer matrisli hibrit kompozitler, Metal Dünyası, 2017.
UR  - https://doi.org/10.29109/gujsc.1504065
L1  - https://dergipark.org.tr/en/download/article-file/4017910
ER  -