TY  - JOUR
T1  - Research of Combined Copper Processing Technology Including Heat Treatment and Radial-Shear Rolling
AU  - Pishchikov, Vladislav
AU  - Kuzmin, Sergey
AU  - Chigirinsky, Valeriy
AU  - Marukov, Andrey
AU  - Naizabekov, Abdrakhman
AU  - Volokitina, Irina
PY  - 2024
DA  - December
Y2  - 2024
DO  - 10.55549/epstem.1598059
JF  - The Eurasia Proceedings of Science Technology Engineering and Mathematics
JO  - EPSTEM
PB  - ISRES Publishing
WT  - DergiPark
SN  - 2602-3199
SP  - 101
EP  - 105
VL  - 32
LA  - en
AB  - This paper is devoted to the study of the influence of a combined technology, including both preheat treatment and deformation on a radial-shear rolling mill, on changes in the mechanical properties of M1 grade copper. The conducted studies have shown that after preliminary heat treatment, namely quenching at a temperature 500°C, and subsequent deformation of billets at temperatures of 20 and 200°C on a radial-shear rolling mill, an increase in the strength properties of copper is observed with a decrease in its plastic properties within the normal range. Also, according to the results of the conducted studies, it was found that the crosssection of the obtained copper bars shows a spread of microhardness values, which fully correlates with the data on the formation of areas with different microstructures after radial shear rolling in this cross-section.
KW  - Combined technology
KW  - Pre-heat treatment
KW  - Radial shear rolling
KW  - Copper
KW  - Mechanical properties
KW  - Microhardness
CR  - Pishchikov, V., Kuzmin, S., Chigirinsky, V., Marukov, A., Naizabekov, A., & Volokitina, I. (2024). Research of combined copper processing technology including heat treatment and radial-shear rolling. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), 32, 101-105.
UR  - https://doi.org/10.55549/epstem.1598059
L1  - https://dergipark.org.tr/en/download/article-file/4424755
ER  -