TY  - JOUR
T1  - A review on strategies for minimizing cogging torque in flux-switching permanent magnet machines
TT  - Akı anahtarlamalı sabit mıknatıslı makinelerde vuruntu momentini en aza indirme stratejileri üzerine bir inceleme
AU  - Tepretmez, Başak
AU  - Çetin, Emrah
PY  - 2025
DA  - July
Y2  - 2025
DO  - 10.28948/ngumuh.1603645
JF  - Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi
JO  - NÖHÜ Müh. Bilim. Derg.
PB  - Nigde Omer Halisdemir University
WT  - DergiPark
SN  - 2564-6605
SP  - 1155
EP  - 1170
VL  - 14
IS  - 3
LA  - en
AB  - Due to high volume of the studies in the field, flux switching permanent magnet (FSPM) machines are explored in this article. Particularly, this paper is examined the studies carried out to reduce cogging torque (CT) in FSPMs. The reduction of CT improves the smoothness and efficiency of electric machines, improving the effectiveness of control systems. In addition, the reduction in vibration and noise levels increases accuracy and reliability, particularly in sensitive applications. The research begins with a systematic examination of CT in FSPM machines. Through this analysis, certain parameters contributing to the mitigation of CT were determined, and relevant advancements from prior literature were thoroughly examined. Mostly, the structural changes were implemented by enhancing the rotor and stator to mitigate the CT. The rotor and stator efforts are discussed and classified in detail in this paper. These investigations substantiate the degradation in CT and the results make a significant contribution to the existing literature within the scope.
KW  - CT
KW  - Flux switching machine
KW  - Optimization
KW  - Permanent magnet
KW  - Rotor/Stator
N2  - Bu alandaki çalışmaların yoğunluğu nedeniyle, bu makalede akı anahtarlamalı sabit mıknatıslı (AASM) makineler incelenmiştir. Bu makalede özellikle AASM'lerde vuruntu momentini (VM) azaltmak için yapılan çalışmalar incelenmiştir. VM’nin azaltılması, elektrik makinelerinin düzgünlüğünü ve verimliliğini artırarak kontrol sistemlerinin etkinliğini geliştirir. Buna ek olarak, titreşim ve gürültü seviyelerindeki azalma, özellikle hassas uygulamalarda doğruluğu ve güvenilirliği artırır. Araştırmalar, AASM makinelerindeki vuruntu momentini sistematik bir şekilde incelemesiyle başlamaktadır. Bu analizin sonucunda VM’yi azaltmayı amaçlayan parametreler belirlenmiş ve ilgili iyileştirme çalışmaları gözden geçirilmiştir. Çoğunlukla, yapısal değişiklikler vuruntu momentini azaltmak için rotor ve statoru geliştirerek uygulanmıştır. Rotor ve stator çalışmaları makalede ayrıntılı olarak tartışılmış ve sınıflandırılmıştır. Bu incelemeler VM’yi azaltmayı kanıtlamakta ve sonuçlar bu kapsamdaki mevcut literatürde önemli bir katkı sağlamaktadır.
CR  - P. Svetlik, K. Hruska, Construction of the FSPM machine and its measurement in comparison with modeled results, 2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe), pp. 1-9, 2016.
CR  - H. Chen, A. M. EL-Refaie and N. A. O. Demerdash, Flux-Switching Permanent Magnet Machines: A Review of Opportunities and Challenges—Part I: Fundamentals and Topologies, in IEEE Transactions on Energy Conversion, vol. 35, no. 2, pp. 684-698, June 2020, doi: 10.1109/TEC.2019.2956600
CR  - W. Hua, G. Zhang, M. Cheng, Investigation and Design of a High-Power Flux-Switching Permanent Magnet Machine for Hybrid Electric Vehicles, in IEEE Transactions on Magnetics, vol. 51, no. 3, pp. 1-5, Art no. 8201805, March 2015. doi: 10.1109/TMAG.2014.2345732
CR  - M. Taha, A. A. Saleh, A. Hemeida, Effect of Magnet Materials on Designing of a High Power-Low Voltage Permanent Magnet Flux Switching Motor for Automotive Applications, 2020 International Conference on Electrical Machines (ICEM), pp. 2280-2286, 2020.
CR  - Z. Xiang, L. Quan, X. Zhu, A New Partitioned-Rotor Flux-Switching Permanent Magnet Motor with High Torque Density and Improved Magnet Utilization, in IEEE Transactions on Applied Superconductivity, vol. 26, no. 4, pp. 1-5, Art no. 5201905 June 2016. doi: 10.1109/TASC.2016.2514486
CR  - L. Hao, M. Lin, D. Xu, W. Zhang, N. Li, Rotor design techniques for reducing the CT in a novel dual-rotor axial field flux-switching permanent magnet machine, 2014 17th International Conference on Electrical Machines and Systems (ICEMS), pp. 1581-1586, 2014.
CR  - W. Hua, M. Cheng, Z. Q. Zhu, D. Howe, Analysis and Optimization of Back EMF Waveform of a Flux-Switching Permanent Magnet Motor, in IEEE Transactions on Energy Conversion, vol. 23, no. 3, pp. 727-733, Sept. 2008. doi: 10.1109/IEMDC.2007.382817
CR  - X. Zhu, W. Hua, Back-EMF waveform optimization of flux-switching permanent magnet machines, 2016 XXII International Conference on Electrical Machines (ICEM), pp. 2419-2425, 2016.
CR  - Z. Q. Zhu, A. S. Thomas, J. T. Chen and G. W. Jewell, CT in Flux-Switching Permanent Magnet Machines, in IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4708-4711, Oct. 2009. doi: 10.1109/TMAG.2009.2022050
CR  - C. Sikder, I. Husain, W. Ouyang, CT Reduction in Flux-Switching Permanent-Magnet Machines by Rotor Pole Shaping, in IEEE Transactions on Industry Applications, vol. 51, no. 5, pp. 3609-3619, Sept.-Oct. 2015. doi: 10.1109/TIA.2015.2416238
CR  - I. Hussain, F. Khan, U. Zafar, N. Ahmad, N. Iqbal, CT reduction of flux-switching permanent magnet machine with overlapping windings, 2018 1st International Conference on Power, Energy and Smart Grid (ICPESG), pp. 1-6, 2018.
CR  - Mengjie Shen, Jianhua Wu, Chun Gan, Yihua Hu, Wenping Cao, CT reduction in FSPM machines with short magnets and stator lamination bridge structure, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, pp. 4307-4312, 2016.
CR  - E. Cetin, Z. Q. Zhu, Optimization of Torque Performance of FSPM Machines by Rotor Pole Shaping using FEA and Genetic Algorithm, 2022 Second International Conference on Sustainable Mobility Applications, Renewables and Technology (SMART), pp. 1-8, 2022.
CR  - J. H. Kim, Y. Li, E. Cetin, B. Sarlioglu, CT minimization with rotor tooth shaping in axial flux-switching permanent magnet machine, 2016 IEEE Energy Conversion Congress and Exposition (ECCE), pp. 1-7, 2016.
CR  - J. Zhao, Y. Yan, B. Li, X. Liu, Z. Chen, Influence of Different Rotor Teeth Shapes on the Performance of Flux Switching Permanent Magnet Machines Used for Electric Vehicles, Energies 7, 8056-8075, 2014. doi:10.3390/en7128056
CR  - X. Zhu, W. Hua, CT Suppression in Flux-Switching Permanent Magnet Machines by Superposition of Single Rotor Tooth, 2018 IEEE Energy Conversion Congress and Exposition (ECCE), pp. 4359-4366, 2018.
CR  - X. Zhu, W. Hua, G. Zhang, Analysis and Reduction of CT for Flux-Switching Permanent Magnet Machines, in IEEE Transactions on Industry Applications, vol. 55, no. 6, pp. 5854-5864, Nov.-Dec. 2019. doi: 10.1109/TIA.2019.2938721
CR  - A. Lindner, H. Kurtović, I. Hahn, Investigation of parametrized curves for the pole shaping in an E-core Flux-Switching Machine with large air-gap, 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016), pp. 1-5, 2016.
CR  - J. Zhao, Y. Zheng, C. Zhu, H. Chen and L. Yang, Torque ripple reduction of a modular-stator outer-rotor flux-switching permanent-magnet motor, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, pp. 3765-3770, 2017.
CR  - F. Yu, M. Cheng, K. T. Chau, Controllability and Performance of a Nine-Phase FSPM Motor Under Severe Five Open-Phase Fault Conditions, in IEEE Transactions on Energy Conversion, vol. 31, no. 1, pp. 323-332, March 2016. doi: 10.1109/TEC.2015.2486521
CR  - W. Huang, W. Hua, X. Zhu, Y. Fan, M. Cheng, Comparison of CT Compensation Methods for a Flux-Switching Permanent Magnet Motor by Harmonic Current Injection and Iterative Learning Control, 2020 International Conference on Electrical Machines (ICEM), pp. 1971-1977, 2020.
CR  - M. Cheng, P. Han, Y. Du, H. Wen, X. Li, A Tutorial on General Air-Gap Field Modulation Theory for Electrical Machines, in IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 10, no. 2, pp. 1712-1732, April 2022. doi: 10.1109/JESTPE.2021.3055224
CR  - Q. Ding, T. Ni, X. Wang, Z. Deng, Optimal Winding Configuration of Bearingless Flux-Switching Permanent Magnet Motor with Stacked Structure, in IEEE Transactions on Energy Conversion, vol. 33, no. 1, pp. 78-86, March 2018. doi: 10.1109/TEC.2017.2752746
CR  - P. Wang, W. Hua, G. Zhang, B. Wang and M. Cheng, Torque Ripple irradi Suppression of Flux-Switching Permanent Magnet Machine Based on General Air-Gap Field Modulation Theory, in IEEE Transactions on Industrial Electronics, vol. 69, no. 12, pp. 12379-12389, Dec. 2022. doi: 10.1109/TIE.2021.3137617
CR  - D. Wang, X. Wang, S. -Y. Jung, Reduction on CT in Flux-Switching Permanent Magnet Machine by Teeth Notching Schemes, in IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 4228-4231, Nov. 2012. doi: 10.1109/TMAG.2012.2200237
CR  - D. Xie, Y. Wang, Z. Deng, FSPM machines with twisted-rotor structure, 2014 9th IEEE Conference on Industrial Electronics and Applications, pp. 1533-1538, 2014.
CR  - W. Fei, P. C. K. Luk, J. X. Shen, B. Xia and Y. Wang, Permanent-Magnet Flux-Switching Integrated Starter Generator with Different Rotor Configurations for CT and Torque Ripple Mitigations, in IEEE Transactions on Industry Applications, vol. 47, no. 3, pp. 1247-1256, May-June 2011. doi: 10.1109/ECCE.2010.5618119
CR  - S. M. K. Sangdehi, S. E. Abdollahi, S. A. Gholamian, CT Reduction of 6/13 Hybrid Excited Flux Switching Machine with Rotor Step Skewing, 2019 5th Conference on Knowledge Based Engineering and Innovation (KBEI), Tehran, Iran, pp. 582-586, 2019.
CR  - L. Hao, M. Lin, D. Xu, W. Zhang, N. Li, Rotor design techniques for reducing the CT in a novel dual-rotor axial field flux-switching permanent magnet machine, 2014 17th International Conference on Electrical Machines and Systems (ICEMS), pp. 1581-1586, 2014.
CR  - Z. Ma, M. Cheng, W. Yu, Y. Jiang, W. Hua, C. Zhao, Exploration of Rotor Topology Evolution Mechanism in the Stator-PM Machines, in IEEE Transactions on Industry Applications, 2024. doi: 10.1109/TIA.2024.3481398
CR  - X. Zhu, Z. Xiang, C. Zhang, L. Quan, Y. Du, W. Gu, Co-Reduction of Torque Ripple for Outer Rotor Flux-Switching PM Motor Using Systematic Multi-Level Design and Control Schemes, in IEEE Transactions on Industrial Electronics, vol. 64, no. 2, pp. 1102-1112, Feb. 2017. doi: 10.1109/TIE.2016.2613058
CR  - J. Xiu, S. Wang, Y. Xiu, Reducing CT of 6/4 pole    FSPM machine by optimising parameters of chamfering and flange rotor pole shape without skewing teeth, IET Electric Power Applications, 13: 277-284, 2019. doi:10.1049/iet-epa.2018.5435
CR  - L. Hao, M. Lin, D. Xu, N. Li, W. Zhang, CT reduction of axial field flux-switching permanent magnet machine by rotor tooth notching, 2015 IEEE International Magnetics Conference (INTERMAG), pp. 1-1, 2015.
CR  - M. Liu, W. Sixel, H. Ding, B. Sarlioglu, Investigation of Rotor Structure Influence on the Windage Loss and Efficiency of FSPM Machine, 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Portland, pp. 6499-6505, 2018.
CR  - E. Çetin, The Effects of the Unequal Rotor Slot Arc on CT for Flux Switching Permanent Magnet Machines, El-Cezeri Journal of Science and Engineering, vol. 11, no. 1, pp. 74–81, 2024. doi:10.31202/ecjse.1347168
CR  - E. Cetin, CT reduction by utilizing the unequal rotor slot arc method for FSPM Machines, Ain Shams Engineering Journal, 2024. doi: 10.1016/j.asej.2024.103008
CR  - Z. Zhang, P. Wang, W. Hua, T. Zhang, G. Wang, M. Hu, Comprehensive Investigation and Evaluation of CT Suppression Techniques of Flux-Switching Permanent Magnet Machines, in IEEE Transactions on Transportation Electrification, vol. 9, no. 3, pp. 3894-3907, Sept. 2023. doi: 10.1109/TTE.2023.3248220
CR  - J. Zhao, W. Fu, Y. Zheng, Z. Chen, Y. Wang, Comparative Study of Modular-Stator and Conventional Outer-Rotor Flux-Switching Permanent-Magnet Motors, in IEEE Access, vol. 7, pp. 38297-38305, 2019. doi: 10.1109/ACCESS.2018.2890163
CR  - W. Yu, K. Liu, W. Hua, M. Hu, Z. Zhang and J. Hu, A New High-Speed Dual-Stator Flux Switching Permanent Magnet Machine with Distributed Winding, in IEEE Transactions on Magnetics, vol. 58, no. 2, pp. 1-6, Art no. 8102006, 2022. doi: 10.1109/TMAG.2021.3082931
CR  - Zuo, Zijie, Yidong Du, and Lei Yu. Influence of Stator/Rotor Torque Ratio on Torque Performance in External-Rotor Dual-Armature Flux-Switching PM Machines Machines 12, no. 9: 588, 2024. doi: 10.3390/machines12090588
CR  - P. Su, Y. Wang, Y. Li, W. Hua and Y. Shen, CT Reduction of Axial-Modular Flux Switching Permanent Magnet Machine by Module Combination Technique, in IEEE Transactions on Transportation Electrification, vol. 10, no. 1, pp. 1947-1956, March 2024, doi: 10.1109/TTE.2023.3262845.
CR  - Z. Xu, M. Cheng and M. Tong, Design Consideration for E-Core Outer-Rotor Flux-Switching Permanent Magnet Machines From the Perspective of the Stator-Poles and Rotor-Teeth Combinations, in IEEE Transactions on Industry Applications, vol. 61, no. 1, pp. 161-171, Jan.-Feb. 2025, doi: 10.1109/TIA.2024.3478173
CR  - C. Gan, J. Wu, M. Shen, W. Kong, Y. Hu, W. Cao, Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on CT Mitigation in FSPM Machines, in IEEE Transactions on Energy Conversion, vol. 33, no. 2, pp. 845-855, June 2018. doi: 10.1109/TEC.2017.2777468
CR  - X. Zhu, Z. Shu, L. Quan, Z. Xiang, X. Pan, Design and Multicondition Comparison of Two Outer-Rotor Flux-Switching Permanent-Magnet Motors for In-Wheel Traction Applications, in IEEE Transactions on Industrial Electronics, vol. 64, no. 8, pp. 6137-6148, Aug. 2017. doi: 10.1109/TIE.2017.2682025
CR  - Y. Du, F. Xiao, W. Hua, X. Zhu, M. Cheng, L. Quan, K. T. Chau, Comparison of Flux-Switching PM Motors with Different Winding Configurations Using Magnetic Gearing Principle, in IEEE Transactions on Magnetics, vol. 52, no. 5, pp. 1-8, Art no. 8201908, 2016. doi: 10.1109/TMAG.2015.2513742
CR  - C. Sikder, I. Husain, Stator vibration and acoustic noise analysis of FSPM for a low-noise design, 2016 IEEE Energy Conversion Congress and Exposition (ECCE), Milwaukee, WI, USA, pp. 1-8, 2016.
CR  - Z. Z. Wu, Z. Q. Zhu, Analysis of Air-Gap Field Modulation and Magnetic Gearing Effects in Switched Flux Permanent Magnet Machines, in IEEE Transactions on Magnetics, vol. 51, no. 5, pp. 1-12, Art no. 8105012, 2015. doi: 10.1109/TMAG.2015.2402201
CR  - A. Zohoori, A. Vahedi, M. A. Noroozi, Design study of FSPM generator with novel outer rotor configuration for small wind turbine application, 2014 14th International Conference on Environment and Electrical Engineering, pp. 275-279, 2014
CR  - H. Lan, Q. Chen, J. Zou, Y. Xu, M. Wang and M. Liu, Influence of dummy slots on noise and vibration performance in permanent magnet synchronous machines, 2017 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific), Harbin, China, 2017, pp. 1-6, doi: 10.1109/ITEC-AP.2017.8080970
CR  - Y. Yokoi and T. Higuchi, Stator Design of Alternate Slot Winding for Reducing Torque Pulsation With Magnet Designs in Surface-Mounted Permanent Magnet Motors, in IEEE Transactions on Magnetics, vol. 51, no. 6, pp. 1-11, June 2015, Art no. 8202911, doi: 10.1109/TMAG.2015.2394771.
CR  - Z. Jin, X. Zhu, S. Chen, Z. Li and S. Ding, Comparative Study on Three Novel Hybrid Excited Multitooth Flux-switching Permanent Magnet Machines, 2022 Joint MMM-Intermag Conference (INTERMAG), New Orleans, LA, USA, 2022, pp. 1-6, doi: 10.1109/INTERMAG39746.2022.9827848.
CR  - K. T. Chau, C. C. Chan, C. Liu, Overview of permanent-magnet brushless drives for electric and hybrid electric vehicles, IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2246–2257, Jun. 2008. doi: 10.1109/TIE.2008.918403
CR  - L. Mo, L. Quan, X. Zhu, Y. Chen, H. Qiu, K. T. Chau, Comparison and analysis of flux-switching permanent-magnet double-rotor machine with 4QT used for HEV, IEEE Trans. Magn., vol. 50, no. 11, Art. ID 8205804, 2014. doi: 10.1109/TMAG.2014.2331313
CR  - J. Zhang, Z. Chen, M. Cheng, Design and comparison of a novel stator interior permanent magnet generator for direct-drive wind turbines, IET Renew. Power Generat., vol. 1, no. 4, pp. 203–210, Dec. 2007. doi:10.1049/iet-rpg:20070054
CR  - M. Yu, W. Zhao, Y. Wang, X. Wang, Design and Optimization of a Novel Dual-Rotors Flux-Switching Permanent-Magnet Machine, 2020 IEEE 1st China International Youth Conference on Electrical Engineering (CIYCEE), pp. 1-6, 2020.
CR  - X. Zhu, W. Hua, M. Cheng, CT minimization in flux-switching permanent magnet machines by tooth chamfering, 2016 IEEE Energy Conversion Congress and Exposition (ECCE), pp. 1-7, 2016
CR  - S. Çarkıt, N. Üstkoyuncu, T. Çarkıt, Investigation of the effects of magnet, stator and rotor geometries on torque and torque ripple in permanent magnet flux switched motor, Gazi University Journal of Science Part C: Design and Technology, 308-314, 2024. doi:10.29109/gujsc.1202243.
CR  - D. Bobba, Y. Li, B. Sarlioglu, “Harmonic Analysis of Low-Stator-Slot and Rotor-Pole Combination FSPM Machine Topology for High Speed,” in IEEE Transactions on Magnetics, vol. 51, no. 11, pp. 1-4, Art no. 8207104, 2015. doi: 10.1109/TMAG.2015.2446414
CR  - Y. Shi, L. Jian, J. Wei, Z. Shao, W. Li, C. C. Chan, A New Perspective on the Operating Principle of Flux-Switching Permanent-Magnet Machines, in IEEE Transactions on Industrial Electronics, vol. 63, no. 3, pp. 1425-1437, March 2016. doi: 10.1109/TIE.2015.2492940
CR  - J. Zhu, L. Wu, H. Wen, “Optimization and Comparison of Dual-Armature Flux-Switching Permanent Magnet Machines with Different Stator Core Shapes,” in IEEE Transactions on Industry Applications, vol. 58, no. 1, pp. 314-324, Jan.-Feb. 2022. doi: 10.1109/TIA.2021.3131300
CR  - Y. Gu, L. Quan, Z. Xiang, Minimization the torque ripple of flux-switching permanent magnet motor based on iterative learning control, 2014 17th International Conference on Electrical Machines and Systems (ICEMS), pp. 1985-1989, 2014
CR  - Z. Zhang, P. Wang, W. Hua, T. Zhang, G. Wang, M. Hu, Comprehensive Investigation and Evaluation of CT Suppression Techniques of Flux-Switching Permanent Magnet Machines, in IEEE Transactions on Transportation Electrification, vol. 9, no. 3, pp. 3894-3907, Sept. 2023. doi: 10.1109/TTE.2023.3248220
CR  - L. Zhu, S. Z. Jiang, Z. Q. Zhu, C. C. Chan, Analytical Methods for Minimizing CT in Permanent-Magnet Machines, in IEEE Transactions on Magnetics, vol. 45, no. 4, pp. 2023-2031, April 2009. doi: 10.1109/TMAG.2008.2011363
CR  - X. Zhu, W. Hua, Z. Wu, W. Huang, H. Zhang, M. Cheng, “Analytical Approach for Cogging Torque Reduction in Flux-Switching Permanent Magnet Machines Based on Magnetomotive Force-Permeance Model,” in IEEE Transactions on Industrial Electronics, vol. 65, no. 3, pp. 1965-1979, March 2018. doi: 10.1109/TIE.2017.2739688
CR  - Z. Gu, B. Zhao, R. Hu, X. Yin, X. Liu, Q. Zhang, J. Gong, N. Zhou, Y. Huang, “Electromagnetic Structure Research of the Modular Arc-Linear Flux Switching Permanent-Magnet Motor,” 2018 21st International Conference on Electrical Machines and Systems (ICEMS), pp. 1857-1862, 2018
CR  - P. Wang, W. Hua, G. Zhang, B. Wang, M. Cheng, Torque Ripple Suppression of Flux-Switching Permanent Magnet Machine Based on General Air-Gap Field Modulation Theory, in IEEE Transactions on Industrial Electronics, vol. 69, no. 12, pp. 12379-12389, Dec. 2022. doi: 10.1109/TIE.2021.3137617
UR  - https://doi.org/10.28948/ngumuh.1603645
L1  - https://dergipark.org.tr/en/download/article-file/4450307
ER  -