@article{article_1633451, title={Investigation of the effect of GCP number and distribution on photogrammetric product accuracy in UAV photogrammetry}, journal={Jeodezi ve Jeoinformasyon Dergisi}, volume={12}, pages={77–88}, year={2025}, DOI={10.9733/JGG.2025R0006.E}, author={Türk, Tarık and Bahadur, Berkay and Demirel, Yasin and Altuntaş, Cemali and Öcalan, Taylan}, keywords={UAV Photogrammetry, GCP, Network design}, abstract={Recently, photogrammetric products produced using Unmanned Aerial Vehicles (UAVs) are frequently preferred for disaster management, geological, and meteorological studies, urban studies and military purposes. Obtaining products with UAV photogrammetry provides a significant advantage over ground-based methods in terms of speed and cost. At the same time, the accuracy of the products produced is of particular importance. In this study, the effects of the number of Ground Control Points (GCPs) and GCP network design on accuracy were investigated. In this direction, 12 GCPs with homogeneous distribution in the study area were established and their locations were determined by GNSS measurements. Then, scenarios with different number of GCPs and different network designs were created, and the accuracy of these points were evaluated. As a result, it has been concluded that 5 GCPs homogeneously distributed in the field is sufficient for the products at high accuracy (≤ 10 cm) required in geomatics applications, increasing the number of the GCPs will not benefit the accuracy of the project and this process is disadvantageous in terms of increasing the cost along with the speed.}, number={1}, publisher={TMMOB Harita ve Kadastro Mühendisleri Odası}