TY  - JOUR
T1  - Examination of Combined Effect of Porous Material and Corrugated Wall on Convection Heat Transfer in A Conduit
TT  - Bir Kanalda Gözenekli Malzeme ve Kıvrımlı Duvarın Taşınımla Isı Transferi Üzerindeki Birleşik Etkisinin İncelenmesi
AU  - Kamışlı, Fethi
AU  - Algıbara, Musaa
PY  - 2025
DA  - September
Y2  - 2025
DO  - 10.55525/tjst.1642840
JF  - Turkish Journal of Science and Technology
JO  - TJST
PB  - Fırat University
WT  - DergiPark
SN  - 1308-9080
SP  - 419
EP  - 429
VL  - 20
IS  - 2
LA  - en
AB  - In this research, a simulation was carried out to investigate the combined effect of the presence of a porous medium in a channel and semicircular sections on its upper wall on non-Darcian flow and forced convection heat transfer. The simulation of the created model was done by solving the dimensionless constitutive equations using the COMSOL multiphysics program (v.6.1). The effects of process parameters such as the radius of semicircular sections (R) and the distance between centers of semicircular sections (Lc), Reynolds number (Re) and Darcy number (Da) on the convection heat transfer were investigated. The results showed that the heat transfer rate increased with increasing radius, distance between sections, and Reynolds number. The maximum heat transfer rate was obtained at radius (R = 0.75H), distance between sections (Lc = 9R), and Reynolds number (Re = 200). The values for velocity and Nusselt number obtained in the study were compared with the values obtained in similar studies to check whether the program gave correct results. It was observed that the Nusselt number values obtained in this study, as in similar studies, decreased asymptotically and remained constant at the value of 5. It was found that the results of the present study were in good agreement with those of the previous related studies.
KW  - Forced convection
KW  - Non-Darcian flow
KW  - porous medium
KW  - semi-circular sections
N2  - Bu araştırmada, bir kanal içerisinde bulunan gözenekli bir ortamın ve kanalın üst duvarında bulunan yarım daire kesitlerin Darcian olmayan akış ve zorlanmış taşınımla ısı transferi üzerindeki birleşik etkisini incelemek amacıyla bir simülasyon gerçekleştirilmiştir. Oluşturulan modelin simülasyonu, boyutsuz kuramsal denklemlerinin COMSOL multiphysics programı (v.6.1) kullanılarak çözülmesiyle yapılmıştır. Yarım daire kesitlerinin yarıçapı (R), yarım daire kesitlerinin merkezleri arasındaki uzaklık (Lc), Reynolds sayısı (Re) ve Darcy sayısı (Da) gibi proses parametrelerinin taşınımla ısı transferi üzerindeki etkileri incelenmiştir. Sonuçlar, yarıçap, kesitler arası uzaklık ve Reynolds sayısının artmasıyla ısı transfer hızının arttığını göstermiştir. Maksimum ısı transfer hızı, yarıçapın, R = 0,75H, kesitler arası mesafenin, Lc = 9R, ve Reynolds sayısının Re = 200 olduğu durumda elde edilmiştir. Çalışmada elde edilen hız ve Nusselt sayısı için değerler, benzer çalışmalarda elde edilen değerlerle kıyaslanarak programın doğru sonuç verip vermediği kontrol edildi. Bu çalışmada elde edilen Nusselt sayısı değerleri, benzer çalışmalarda olduğu gibi, asimptotik biçimde azalarak 5 değerinde sabit kaldığı gözlendi. Mevcut çalışmanın sonuçlarının, daha önce bu konuda yapılmış çalışmaların sonuçlarıyla büyük ölçüde uyumlu olduğu bulunmuştur.
CR  - Kumar P, Pandey KM. Effect of wave shift of porous slab on thermo-hydraulic transport characteristics of laminar flow through a wavy channel, Materials Today Proc 2022; 49: 1573–1578.
CR  - Pavel BI, Mohamad AA. An experimental and numerical study on heat transfer enhancement for gas heat exchangers fitted with porous media. Int J Heat Mass Trans 2004; 47: 4939–4952.
CR  - Hadim H, North M. Forced convection in a sintered porous channel with inlet and outlet slots. Int. J. Therm. Sci 2005; 44: 33–42.
CR  - Shirvan MK, Mirzakhanlari S, Kalogirou SA, Öztop HF, Mamourian M. Heat transfer and sensitivity analysis in a double pipe heat exchanger filled with porous medium. Int J Therm Sci 2017; 121: 124–137.
CR  - Mahmud S, Sadrul Islam A, Feroz C. Flow and heat transfer characteristics inside a wavy tube. Heat Mass Transf 2003; 39: 387–393.
CR  - Metwally HM, Manglik RM. Enhanced heat transfer due to curvature-induced lateral vortices in laminar flows in sinusoidal corrugated-plate channels. Int J Heat Mass Transf 2004; 47: 2283–2292.
CR  - Islamoglu Y, Parmaksizoglu C. Numerical investigation of convective heat transfer and pressure drop in a corrugated heat exchanger channel. Appl Therm Eng 2004; 24: 141–147.
CR  - Hossain MZ, Islam AKMSF. Fully developed flow structures and heat transfer in sine-shaped wavy channels, Int. Commun. Heat Mass Transf 2004; 31: 887–896.
CR  - Ramgadia AG, Saha AK. Fully developed flow and heat transfer characteristics in a wavy passage: Effect of amplitude of waviness and Reynolds number. Int J Heat Mass Transf 2012; 55: 2494–2509.
CR  - Naphon P. Laminar convective heat transfer and pressure drop in the corrugated channels. Int Commun Heat Mass Transf 2007; 34:  62–71.
CR  - Naphon P. Effect of corrugated plates in an in-phase arrangement on the heat transfer and flow developments. Int J Heat Mass Transf 2008; 51: 3963–3971.
CR  - Mehta SK, Pati S. Numerical study of thermo-hydraulic characteristics for forced convective flow through the wavy channel at different Prandtl numbers. J Therm Anal Calorim 2020; 141: 2429–2451.
CR  - Mehta SK, Pati S, Baranyi L. Effect of amplitude of walls on thermal and hydrodynamic characteristics of laminar flow through an asymmetric wavy channel. Case Study Therm Eng 2021; 31: 101796.
CR  - Sui Y, Teo CJ, Lee PS, Chew YT, Shu C. Fluid flow and heat transfer in wavy microchannels. Int J Heat Mass Transf 2010; 53: 2760–2772.
CR  - Gong L, Kota K, Tao W, Joshi Y. Parametric numerical study of flow and heat transfer in microchannels with wavy walls. J Heat Trans 2011; 133(5): 051702.
CR  - Borah A, Mehta SK, Pati S. Analysis of conjugate heat transfer for forced convective flow through the wavy mini channel, Int J Numer. Methods Heat Fluid Flow 2022; 33: 174-203.
CR  - Mansoor FS, Dawood AS. Numerical investigation of heat transfer and fluid flow characteristics inside wavy channels filled with porous media. Mech Eng Res. 2013; 3: 13-27.
CR  - Heidary H, Kermani MJ. Enhancement of heat exchange in a wavy channel linked to a porous domain; a possible duct geometry for fuel cells. Int Commun Heat Mass Transf 2012; 39: 112–120.
CR  - Akbarzadeh M, Maghrebi MJ. Combined effects of corrugated walls and porous inserts on performance improvement in a heat exchanger channel. Int J Therm Sci 2018; 127: 266–276.
CR  - Kumar P, Pandey KM. Numerical investigation of thermo-hydraulic transport characteristics of two-dimensional, steady flow through the partially porous wavy channel. Numer Heat Transf Part A Appl 2021; 81: 31–47.
CR  - Kumar P, Dwivedi R, Pandey KM. Numerical investigation of thermo-hydraulic transport characteristics of laminar flow through the partially filled porous wavy channel: Prandtl number. Numer Heat Trans Part A Appl 2022; 83: 1045-1066.
CR  - Bejan A. Natural convection heat transfer in a porous layer with internal flow obstructions. Int J Heat Mass Transf 1983; 26: 815–822.
UR  - https://doi.org/10.55525/tjst.1642840
L1  - https://dergipark.org.tr/en/download/article-file/4622928
ER  -