TY  - JOUR
T1  - Effects of dimethyl ether on cyclic variations in compression ignition engines
AU  - Sezer, İsmet
PY  - 2025
DA  - July
Y2  - 2025
DO  - 10.55696/ejset.1662475
JF  - Eurasian Journal of Science Engineering and Technology
JO  - (EJSET)
PB  - Nigde Omer Halisdemir University
WT  - DergiPark
SN  - 2718-0883
SP  - 121
EP  - 135
VL  - 6
IS  - 2
LA  - en
AB  - Dimethyl ether (DME) can be used in compression ignition (CI) namely diesel engines as a fuel and fuel additive. This paper was compiled from the findings of the published papers on DME in diesel engines. The special procedures are employed for reduction of pollutant emissions of diesel engines. The first procedure is improvement of combustion via engine design and fuel injection modification but this is expensive and protracted. The second procedure is used an exhaust gas devices i.e. catalytic converter and particulate filter. However, these devices have adverse impact on engine performance. The last procedure is practiced the various alternative fuels and additives to reduce the emissions and also improve engine performance. The last one seems effective and economical. DME is superior for diesel engines thanks to smart fuel properties i.e. high cetane number and oxygen content. Conversely, combustion, performance and emissions in an internal combustion engine (ICE) are depended notably cyclic variations. Thus, it is vital that results of studies on DME are evaluated jointly to practice applications. Hence, this study aims to investigate the effects of DME on cyclic variations depending on current literature.
KW  - Combustion
KW  - Compression ignition engines
KW  - Cyclic variations
KW  - Dimethyl ether
CR  - S. H. Yoon, J. P. Cha and C. S. Lee, “An investigation of the effects of spray angle and injection strategy on dimethyl ether (DME) combustion and exhaust emission characteristics in a common–rail diesel engine,” Fuel Processing Technology, vol. 91, pp. 1364–1372, 2010. https://doi.org/10.1016/j.fuproc.2010.04.017
CR  -     I. M. Youn, S. H. Park, H. G. Roh and C. S. Lee, “Investigation on the fuel spray and emission reduction characteristics for dimethyl ether (DME) fueled multi–cylinder diesel engine with common–rail injection system,” Fuel Processing Technology, vol. 92, pp. 1280–1287, 2011. https://doi.org/10.1016/j.fuproc.2011.01.018
CR  -     M. Alam and S. Kajitani, “DME as an alternative fuel for direct injection diesel engine,” in 4th International Conference on Mechanical Engineering, December 26–28, Dhaka, Bangladesh, (2001), pp. 87–92.
CR  -     S. Maji, S. Ahmed, W. A. Siddiqui and A. Kumar, “Impact of di–methyl ether (DME) as an additive fuel for compression ignition engine in reduction of urban air pollution,” American Journal of Environmental Protection, vol. 3(2), pp. 48–52, 2015.https://doi.org/10.12691/env–3–2–2
CR  -     S. H. Park and C. S. Lee, “Applicability of dimethyl ether (DME) in a compression ignition engine as an alternative fuel,” Energy Conversion and Management, vol. 86, pp. 848–863, 2014. https://doi.org/10.1016/j.enconman.2014.06.051
CR  -     K. Wattanavichien, “Implementation of DME in a small direct injection diesel engine,” International Journal of Renewable Energy, vol. 4(2), pp. 1–12, 2009.
CR  -     J. Duan, Y. Sun, Z. Yang and Z. Sun, “Combustion and emissions characteristics of diesel engine operating on composite combustion mode of DME and diesel,” Proceedings of International Conference on Mechanical Engineering and Material Science, vol. 27, pp. 463–466, 2012. https://doi.org/10.2991/mems.2012.77
CR  -     A. Kowalewicz and M. Wojtyniak, “Alternative fuels and their application to combustion engines,” Journal of Automobile Engineering, vol. 219, pp. 103–125, 2005. https://doi.org/10.1243/095440705X6399
CR  -     Z. Azizi, M. Rezaeimanesh, T. Tohidian and M. R. Rahimpour, “Dimethyl ether: A review of technologies and production challenges,” Chemical Engineering and Processing, vol. 82, pp. 150–172, 2014. https://doi.org/10.1016/j.cep.2014.06.007
CR  -   Z. Huang, X. Qiao, W. Zhang, J. Wu and J. Zhang, “Dimethyl ether as alternative fuel for CI engine and vehicle,” Frontiers of Energy and Power Engineering in China, vol. 3(1), pp. 99–108, 2009. https://doi.org/10.1007/s11708–009–0013–1
CR  -   K. Banke, D. Freund, B. Atakan and S. A. Kaiser, “Evaluation of fuel additives for HCCI engines operated on fuel–rich methane/air mixtures: DME, DEE, and n–heptane,” Applications in Energy and Combustion Science, vol. 13, paper no 100112, 2023. https://doi.org/10.1016/j.jaecs.2023.100112
CR  -   D. Jung and N. Iida, “Closed–loop control of HCCI combustion for DME using external EGR and rebreathed EGR to reduce pressure–rise rate with combustion–phasing retard,” Applied Energy, vol. 138, pp. 315–330, 2015. https://doi.org/10.1016/j.apenergy.2014.10.085
CR  -   A. Shere and K. A. Subramanian, “Experimental investigation on effects of equivalence ratio on combustion with knock, performance, and emission characteristics of dimethyl ether fueled CRDI compression ignition engine under homogeneous charge compression ignition mode,” Fuel, vol. 322, paper no 124048, 2022. https://doi.org/10.1016/j.fuel.2022.124048
CR  -   Y. Wang, F. Xiao, Y. Zhao, D. Li and X. Lei, “Study on cycle–by–cycle variations in a diesel engine with dimethyl ether as port premixing fuel,” Applied Energy, vol. 143, pp. 58–70, 2015. https://doi.org/10.1016/j.apenergy.2014.12.079
CR  -   K. Ryu, G. E. Zacharakis–Jutz and S.–C. Kong, “Performance characteristics of compression–ignition engine using high concentration of ammonia mixed with dimethyl ether,” Applied Energy, vol. 113, pp. 488–499, 2014. https://doi.org/10.1016/j.apenergy.2013.07.065
CR  -   J. B. Heywood, Internal Combustion Engine Fundamentals, McGraw–Hill Book Company, New York, 1988.
CR  -   A. Şanlı and I. T. Yılmaz, “An experimental study on cycle–to–cycle combustion variations at different speeds in a common–rail diesel engine,” Pamukkale University Journal of Engineering Sciences, vol. 30(4), pp. 429–435, 2024. https://doi.org/10.5505/pajes.2023.23565
CR  -   C. Sandu, C. Pană, N. Negurescu, A. Cernat, C. Nuțu and R. Georgescu, “The study on the influence of utilizing n–butanol at fuelling spark ignition engines,” IOP Conference Series: Materials Science and Engineering, (2022), 1220, 012004. https://doi.org/10.1088/1757–899X/1220/1/012004
CR  -   A. Ibrahim and S. Bari, “Effect of varying compression ratio on a natural gas SI engine performance in the presence of EGR,” Energy & Fuels, vol. 23, pp. 4949–4956, 2009. https://doi.org/10.1021/ef900452q
CR  -   A. Ibrahim and S. Bari, “An experimental investigation on the use of EGR in a supercharged natural gas SI engine,” Fuel, vol. 89, pp. 1721–1730, 2010. https://doi.org/10.1016/j.fuel.2009.07.005
CR  -   H. Xie, K. Xu, T. Chen and H. Zhao, “Investigations into the influence of dimethyl ether micro flame ignition on the combustion and cyclic variation characteristics of flame propagation/auto–ignition hybrid combustion in an optical engine,” Combustion Science and Technology, vol. 189(3), pp. 453–477, 2017. https://doi.org/10.1080/00102202.2016.1223060
CR  -   J. X. Hou, X. Q. Qiao, Z. Wang and W. Liu, “Study on combustion stability of DI–HCCI engine fuelled with dimethyl ether,” Journal of the Energy Institute, vol. 83(2), pp. 63–68, 2010. https://doi.org/10.1179/014426010X12592427712154
CR  -   X. Yu, S. LeBlanc, N. Sandhu, J. Tjong and M. Zheng, “Combustion control of DME HCCI using charge dilution and spark assistance,” Journal of Automobile Engineering, vol. 237(8), pp. 1959–1974, 2023. https://doi.org/10.1177/09544070221103361
CR  -   A. K. Agarwal, H. Valera, V. Kumar, N. K. Mukherjee, S. Mehra and D. Nene, “Cyclic combustion variability of dimethyl–ether–fueled agricultural tractor engine,” ASME Open Journal of Engineering, vol. 2, paper no 021044, pp. 1–10, 2023.  https://doi.org/10.1115/1.4063201
CR  -   A. Shere and K. A. Subramanian, “Experimental investigation on effects of fuel injection timings on dimethyl ether (DME) energy share improvement and emission reduction in a dual–fuel CRDI compression ignition engine,” International Journal of Automotive Science and Technology, vol. 6(2), pp. 98–112, 2022. https://doi.org/10.30939/ijastech..999261
CR  -   H. G. Roh, D. Lee and C. S. Lee, “Impact of DME–biodiesel, diesel–biodiesel and diesel fuels on the combustion and emission reduction characteristics of a CI engine according to pilot and single injection strategies,” Journal of the Energy Institute, vol. 88, pp. 376–385, 2015. https://doi.org/10.1016/j.joei.2014.11.005
CR  -   H. Zhang, R. Hasegawa and H. Ogawa, “Improvement in DME–HCCI combustion with ethanol as a low–temperature oxidation inhibitor,” SAE International Journal of Fuels and Lubricants, vol. 5(1), paper no 2011–01–1791, pp. 41–50, 2011.  https://doi.org/10.4271/2011–01–1791
CR  -   A. Shere and K. A. Subramanian, “Effects of hydrogen and EGR on energy efficiency improvement with ultra low emissions in a common rail direct injection compression ignition engine fueled with dimethyl ether (DME) under HCCI mode,” International Journal of Hydrogen Energy, vol. 52, pp. 1447–1474, 2024. https://doi.org/10.1016/j.ijhydene.2023.08.009
CR  -   N. Jamsran and O. Lim, “A study on the autoignition characteristics of DME–LPG dual fuel in HCCI engine,” Heat Transfer Engineering, vol. 37(17), pp. 1488–1497, 2016. https://doi.org/10.1080/01457632.2016.1142816
CR  -   S. Lee, S. Oh, Y. Choi and K. Kang, “Performance and emission characteristics of a CI engine operated with n–Butane blended DME fuel,” Applied Thermal Engineering, vol. 31, pp. 1929–1935, 2011. https://doi.org/10.1016/j.applthermaleng.2011.02.039
CR  -   D. Lee and C. S. Lee, “Effects of DME–Isobutane blended fuels on combustion and emissions reduction in a passenger car diesel engine,” Journal of Energy Engineering, vol. 143(4), paper no 04017003, pp. 1–9, 2017. https://doi.org/10.1061/(ASCE)EY.1943–7897.0000428
UR  - https://doi.org/10.55696/ejset.1662475
L1  - https://dergipark.org.tr/en/download/article-file/4711293
ER  -