TY  - JOUR
T1  - Wettability of Mg and AZ91 Alloy on Ti6Al4V Alloy Substrate
AU  - Bütev Öcal, Ezgi
AU  - Dericioğlu, Arcan F.
PY  - 2025
DA  - May
Y2  - 2025
JF  - Cankaya University Journal of Science and Engineering
JO  - CUJSE
PB  - Cankaya University
WT  - DergiPark
SN  - 2564-7954
SP  - 16
EP  - 22
VL  - 22
IS  - 1
LA  - en
AB  - The wettability of liquid Mg and AZ91 alloy on bulk Ti6Al4V alloy was investigated in the current study. Wetting experiments were conducted by gradually heating the samples to 800°C for 30 minutes. A CCD camera was used to capture the morphological changes in the droplet during contact angle measurements. Additionally, a scanning electron microscope (SEM) equipped with energy-dispersive X ray spectroscopy (EDS) was used to analyze the morphology and microstructure of the wetted surfaces of the Ti6Al4V alloy. X-ray diffraction analysis (XRD) was performed so as to examine the phase constituents in the reaction layer of the Ti-alloy substrate and magnesium and AZ91 alloy.
KW  - Wettability
KW  - Magnesium alloys
KW  - Ti6Al4V alloy
KW  - Scanning Electron Microscope.
CR  - A. W. Adamson and A. P. Gast, Physical Chemistry of Surfaces, 6th ed. New York, NY, USA: Wiley, 1997.
CR  - E. Bütev-Öcal, “Designing of Ti-Mg composites for various applications,” Ph.D. dissertation, Dept. Metall. and Mater. Eng., Middle East Tech. Univ., Ankara, Turkey, 2020.
CR  - J. Yang et al., “Material Processing and Design of Biodegradable Metal Matrix Composites for Biomedical 
Applications,” Ann. Biomed. Eng., 46, pp. 1229–1240, Jun. 2018, doi:10.1007/s10439-018-2058-y.
CR  - M. Balog et al., “Titanium-Magnesium Composite for Dental Implants (BIACOM),” in TMS 2017 146th Annu. 
Meet. Exhib. Suppl. Proc., pp. 105–116, Feb. 2017, doi:10.1007/978-3-319-51493-2.
CR  - G. Jiang et al., “Porous titanium with entangled structure filled with biodegradable magnesium for potential biomedical applications,” Mater. Sci. Eng. C., vol. 47, pp. 142–149, Feb. 2015, doi:10.1016/j.msec.2014.11.014.
CR  - Z. Esen et al., “Corrosion behaviors of Ti6Al4V-Mg/Mg-Alloy composites,” Corros. Sci., vol.166, 108470, 
Apr.2020, doi: 10.1016/j.corsci.2020.108470.
CR  - Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of 
Surgical Implants, ASTM Standard F1580-01, 2006.
CR  - N. V. Ravi Kumar et al., “Effect of alloying elements on the ignition resistance of magnesium alloys,” Scr. Mater., vol. 49, pp. 225–230, Aug. 2003, doi:10.1016/S1359-6462(03)00263-X.
CR  - K. Kondoh et al., “Wettability of pure Ti by molten pure Mg droplets,” Acta Mater., vol. 58, pp. 606–614, Jan.2010, 
doi:10.1016/j.actamat.2009.09.039.
CR  - D. Muscat and R.A.L. Drew, “Modeling the infiltration kinetics of molten aluminum into porous titanium carbide,” Metall. Mater. Trans. A., vol. 25, pp. 2357–2370, Nov.1994, doi:10.1007/BF02648856.
CR  - S. Bao et al., “Wetting of pure aluminium on graphite, SiC and Al2O3 in aluminium filtration,” Trans. Nonferrous 
Met. Soc. China, vol. 22, pp. 1930–1938, Aug.2012, doi:10.1016/S1003-6326(11)61410-6.
CR  - N. Eustathopoulos, “Wetting by Liquid Metals - Application in Materials Processing: The Contribution of the 
Grenoble Group,” Metals, vol. 5, pp. 350–370, Mar. 2015, doi:10.3390/met5010350.
CR  - Q. Tan et al., “Oxidation of magnesium alloys at elevated temperatures in air: A review,” Corros. Sci., vol. 112, pp. 734–759, Jun. 2016, doi:10.1016/j.corsci.2016.06.018.
UR  - https://dergipark.org.tr/en/pub/cankujse/article/1663138
L1  - https://dergipark.org.tr/en/download/article-file/4714249
ER  -