TY  - JOUR
T1  - EFFECTS OF INLET GAS MIXTURE ON THE PERFORMANCE OF PEMFC WITH REDUCED MEMBRANE THICKNESS: 3D CFD STUDY
AU  - Kaplan, Mahmut
PY  - 2025
DA  - September
Y2  - 2025
DO  - 10.36306/konjes.1664992
JF  - Konya Journal of Engineering Sciences
JO  - KONJES
PB  - Konya Technical University
WT  - DergiPark
SN  - 2667-8055
SP  - 753
EP  - 765
VL  - 13
IS  - 3
LA  - en
AB  - In the present study, the influences of inlet gas species concentrations on the performance of PEMFC with reduced membrane thickness (0.027 mm) are explored via ANSYS Fluent PEMFC module at 0.4 V and 0.6 V. Water, oxygen and hydrogen mass fractions are in the range of 0.12-0.20, 0.1-0.24 and 0.1-0.6, respectively. The results reveal that decreasing hydrogen and increasing water at the entrance of the cell with a thin membrane lead to enhancement of power output. The maximum current density of 4.67 A/cm2 is attained by the configuration including water and oxygen mass fractions of 0.2 at the cathode for 0.4 V. Since this configuration provides lower pressure drop in the channels in comparison to the base model, it is determined as the optimal combination of gas mass fractions.
KW  - PEM Fuel Cell
KW  - Inlet Gases
KW  - Computational Fluid Dynamics
KW  - Cell Performance
KW  - Pressure Loss
KW  - Optimal Gas Mixture
CR  - H. Jain, "From pollution to progress: Groundbreaking advances in clean technology unveiled," Innovation and Green Development, vol. 3, p. 100143, 2024.
CR  - T. Z. Ang, M. Salem, M. Kamarol, H. S. Das, M. A. Nazari, and N. Prabaharan, "A comprehensive study of renewable energy sources: classifications, challenges and suggestions," Energy Strategy Reviews, vol. 43, p. 100939, 2022.
CR  - M. Kaplan, "Influence of inclination angle at the chimney inlet on the power generation in solar chimney power plants through 3D CFD model," International Journal of Photoenergy, vol. 2023, p. 7394007, 2023.
CR  - L. Mesecke, I. Meyer, M. Oel, and R. Lachmayer, "Challenges and potentials for additive manufacturing of hydrogen energy components: a review," International Journal of Hydrogen Energy, vol. 113, pp. 198-219, 2025.
CR  - S. Mo, L. Du, Z. Huang, J. Chen, Y. Zhou, P. Wu, L. Meng, N. Wang, L. Xing, M. Zhao, Y. Yang, J. Tang, Y. Zou, and S. Ye, "Recent advances on PEM fuel cells: from key materials to membrane electrode assembly." Electrochemical Energy Reviews, vol. 6, p. 28, 2023.
CR  - H. Kahraman and Y. Akın, "Recent studies on proton exchange membrane fuel cell components, review of the literature," Energy Conversion and Management, vol. 304, p. 118244, 2024.
CR  - N. A. A. Qasem and G. A. Q. Abdulrahman, "A recent comprehensive review of fuel cells: history, types, and applications," International Journal of Energy Research, vol. 2024, p. 7271748, 2024.
CR  - B. Kienitz, "Optimizing polymer electrolyte membrane thickness to maximize fuel cell vehicle range," International Journal of Hydrogen Energy, vol. 46, pp. 11176-11182, 2021.
CR  - Y. Li, Z. Zhou, X. and W. T. Wu, "Modeling of PEM fuel cell with thin MEA under low humidity operating condition," Applied Energy, vol. 242, pp. 1513-1527, 2019.
CR  - S. Mohanty, A. N. Desai, S. Singh, V. Ramadesigan, S. M, "Effects of the membrane thickness and ionomer volume fraction on the performance of PEMFC with U-shaped serpentine channel," International Journal of Hydrogen Energy, vol. 46, pp. 20650-20663, 2021.
CR  - X. Luo, G. Lau, M. Tesfaye, C. R. Arthurs, I. Cordova, C. Wang, M. Yandrasits, and A. Kusoglu, "Thickness dependence of proton-exchange-membrane properties," Journal of The Electrochemical Society, vol. 168, p. 104517, 2021.
CR  - M. Kaplan, "Three-dimensional CFD analysis of PEMFC with different membrane thicknesses," Renewable Energy and Sustainable Development, vol. 8, no. 2, pp. 45-51, 2022.
CR  - H. J. Choi, H. J. Choi, J. Kim, H. Choi, C. Chu, I. La, C.-Y. Ahn, H. Shim, O. H. Kim, and Y. H. Cho, "Comparison on the impact of membrane thickness on the performance of proton exchange membrane-based electrochemical devices," International Journal of Hydrogen Energy, vol. 119, pp. 161-172, 2025.
CR  - L. Mao, L. Jackson, and T. Jackson, "Investigation of polymer electrolyte membrane fuel cell internal behaviour during long term operation and its use in prognostics," Journal of Power Sources, vol. 362, pp. 39-49, 2017.
CR  - K. Benmouiza and A. Cheknane, "Analysis of proton exchange membrane fuel cells voltage drops for different operating parameters," International Journal of Hydrogen Energy, vol. 43, no. 6, pp. 3512-3519, 2018.
CR  - H. Askaripour, "Effect of operating conditions on the performance of a PEM fuel cell." International Journal of Heat and Mass Transfer, vol. 144, p. 118705, 2019.
CR  - X. Wang, Z. Ni, Z. Yang, Y. Wang, and K. Han, "Optimization of PEMFC operating parameters considering water management by an integrated method of sensitivity analysis, multi-objective optimization and evaluation," Energy Conversion and Management, vol. 321, p. 119057, 2024.
CR  - H. L. Nguyen, Y. Kim, and S. Yu, "Operating condition optimization of heavy-duty truck PEM fuel cell for enhanced performance and durability," International Journal of Hydrogen Energy, vol. 115, pp. 326-343, 2025.
CR  - M. Kaplan, “A numerical parametric study on the impacts of mass fractions of gas species on PEMFC performance,” Engineering and Technology Quarterly Reviews, vol. 5, no. 2, pp. 38-45.
CR  - E. Ogungbemi ,T. Wilberforce, O. Ijaodola, J. Thompson, and A. G. Olabi, "Review of operating condition, design parameters and material properties for proton exchange membrane fuel cells," International Journal of Energy Research, vol. 45, pp. 1227-1245, 2021.
CR  - ANSYS FLUENT Fuel Cell Modules Manual, Release 14.0, ANSYS Inc., 2011.
CR  - L. Wang, A. Husar, T. Zhou, and H. Liu, “A parametric study of PEM fuel cell performances,” International Journal of Hydrogen Energy, vol. 28, no. 11, pp. 1263–1272, 2003.
CR  - M. Kaplan, “Numerical investigation of influence of cross-sectional dimensions of flow channels on PEM fuel cell performance,” Journal of Energy Systems, vol. 5, no. 2, pp. 137-148, 2021.
CR  - S. Mazumder and J. V. Cole, “Rigorous 3-D mathematical modeling of PEM fuel cells II. Model predictions with liquid water transport,” Journal of The Electrochemical Society, vol. 150, no 11, pp. A1510-A1517, 2003
CR  - M. Kaplan, "Performance improvement of PEMFC based on reducing size of the square flow channel: a 3D CFD approach," In Proc. 3rd International World Energy Conference, 2023, pp. 700-707.
CR  - M. Kaplan, "Computational simulation study of the impact of isotropic GDL thermal conductivity on PEMFC characteristics," Renewable Energy and Sustainable Development, vol. 9, no. 2, pp. 42-49, 2023.
CR  - E. E. Kahveci and I. Taymaz, “Assessment of single-serpentine PEM fuel cell model developed by computational fluid dynamics,” Fuel, vol. 217, pp. 51-58, 2018.
CR  - M. Kaplan, "CFD analysis of pressure drop reduction in PEMFC flow channels with distinct cross-section shapes," Black Sea Journal of Engineering and Science, vol. 7, no. 2, pp. 254-260, 2024.
CR  - C. Spiegel, PEM fuel cell modeling and simulation using MATLAB, London, UK: Elsevier/Academic Press, 2008.
CR  - F. Barbir, PEM fuel cells: theory and practice, London, UK: Elsevier/Academic Press, 2013.
CR  - A. Biyikoglu and C. O. Alpat, “Parametric study of a single cell proton exchange membrane fuel cell for a bundle of straight gas channels,” Gazi University Journal of Science, vol. 24, no. 4, pp. 883–899, 2011.
CR  - O. S. Ijaodola, Z. E. Hassan, E. Ogungbemi, F. N. Khatib, T. Wilberforce, J. Thompson, and A. G. Olabi, "Energy efficiency improvements by investigating the water flooding management on proton exchange membrane fuel cell (PEMFC)," Energy, vol. 179, pp. 246-267, 2019.
CR  - X. R. Wang, Y. Ma, J. Gao, T. Li, G. Z. Jiang, and Z. Y. Sun, "Review on water management methods for proton exchange membrane fuel cells," International Journal of Hydrogen Energy, vol. 46, no. 22, pp. 12206-12229, 2021.
UR  - https://doi.org/10.36306/konjes.1664992
L1  - https://dergipark.org.tr/en/download/article-file/4722897
ER  -