@article{article_198349, title={Utilizing wood wastes as reinforcement in wood cement composite bricks}, journal={Journal of the Faculty of Forestry Istanbul University}, volume={65}, pages={31–37}, year={2015}, DOI={10.17099/jffiu.80051}, author={Sadiku, Nusirat}, keywords={Tropical wood species, portland cement, composite bricks, UPV}, abstract={<p> <strong>Utilizing wood wastes as reinforcement in wood cement composite bricks </strong> </p> <p> <strong>Abstract:  </strong>This paper presents the research work undertaken to study the properties of Wood Cement Composite Bricks (WCCB) from different wood wastes and cement / wood content. The WCBBs with nominal density of 1200 kg m <sup>-3  </sup>were produced from three tropical wood species and at varying cement and wood content of 2:1, 2.5:1 and 3:1 on a weight to weight basis. The properties evaluated were compressive strength, Ultra Pulse Velocity (UPV), water absorption (WA) and thickness swelling (TS). The Compressive strength values ranged from 0.25 to 1.13 N mm <sup>-2 </sup> and UPV values ranged from 18753 to 49992 m s <sup>-1 </sup>. The mean values of WA after 672 hours (28 days) of water soaking of the WCCBs ranged from 9.50% to 47.13% where there were no noticeable change in the TS of the bricks. The observed density (OD) ranged from 627 to 1159 kg m <sup>-3 </sup>. <em>A. zygia </em>from the three wood/cement content were more dimensionally stable and better in compressive strength than the other two species where <em> T. scleroxylon </em>had the best performance in terms of UPV. All the properties improved with increasing cement content. WCCBs at 3.0:1 cement/wood content are suitable for structural application such as panelling, ceiling and partitioning </p> <p> <strong>Keywords: </strong> Tropical wood species, portland cement, composite bricks, UPV </p> <p>  </p> <p> <strong>Ahşap çimento kompozit tuğlalarında güçlendirici olarak ahşap atıklarının kullanılması </strong> </p> <p> <strong>Özet:  </strong>Bu çalışma, farklı ahşap atıklarından ve çimento / ahşap içeriğinden elde edilen Ahşap Çimento Kompozit Tuğlaların (WCCB) özelliklerini incelemek üzere gerçekleştirilen araştırmayı temsil etmektedir. Üç tropik ağaç türünden ve ağırlık bazında 2:1, 2,5:1 ve 3:1 olmak üzere değişen çimento ve ahşap içeriğiyle 1200 kg m-3 nominal yoğunluğa sahip WCCB’ler üretilmiştir. Basınç dayanımı, ultra atım hızı  (UPV), su emilimi (WA) ve kalınlık şişmesi (TS) özellikleri değerlendirilmiştir. Basınç dayanımı değerleri 0,25 ila 1,13 N mm-2 arasında değişiklik gösterirken, UPV değerleri ise 18.753 ila 49.992 m s-1 arasında değişmiştir. WCCB’lerin 672 saat (28 gün) suya batırılmasının ardından elde edilen ortalama WA değerleri %9,50 ile %47,13 arasında değişiklik gösterirken, tuğlaların TS’sinde fark edilir bir değişiklik olmamıştır. Gözlemlenen yoğunluk (OD) 627 ila 1.159 kg m-3 arasında değişiklik göstermiştir. UPV açısından <em>T. Scleroxylon </em>’un en iyi performansı göstermiş olduğu diğer iki türe oranla, basınç dayanımı açısından üç adet ahşap/çimento içeriğinden elde edilen <em>A. zygia </em> ölçüsel olarak dengeli ve daha iyi olmuştur. Tüm özellikler, arttırılan çimento içeriği ile iyileştirilmiştir. 3,0:1 çimento / ahşap içeriğine sahip WCCB’ler panel, tavan ve bölümlere ayırma gibi yapısal uygulamalara uygundur.  </p> <p> <strong>Anahtar kelimeler: </strong>Tropik ağaç türleri, portland çimentosu, kompozit tuğlalar, UPV </p> <p>  </p> <p> <strong>Received: </strong> 18 November 2014 -  <strong>Revised: </strong> 01 December 2014 -  <strong>Accepted: </strong> 14 December 2014 </p> <p>  </p> <p> <strong>To cite this article: </strong> Sadiku, N.A., 2015. Utilizing wood wastes as reinforcement in wood cement composite bricks. Journal of the Faculty of Forestry Istanbul University 65(2): 31-37. DOI: 10.17099/jffiu.80051 </p>}, number={2}, publisher={İstanbul University-Cerrahpasa}