TY  - JOUR
T1  - Sac şekillendirme prosesinde kullanılan süzdürme çubuğu frenleme kuvvetinin modellenmesi
TT  - Modeling of drawbead restraining force in sheet metal forming
AU  - İriç, Sedat
AU  - İriç, Derya
AU  - Kozan, Recep
PY  - 2013
DA  - August
Y2  - 2012
DO  - 10.16984/saufbed.27988
JF  - Sakarya University Journal of Science
JO  - SAUJS
PB  - Sakarya University
WT  - DergiPark
SN  - 2147-835X
SP  - 201
EP  - 205
VL  - 17
IS  - 2
LA  - tr
AB  - Drawbeads are used as control mechanism regulated the flow rate at certain locations of the sheet to minimize or prevent defects such as tearing, wrinkling and springback that occur on sheet during a sheet metal forming process. In this study, drawbead restraining force was measured for the sheet metal through blankholder and lower die with a round drawbead with various penetration. This experimental data were used and the mathematical model calculated drawbead restraining force as a function of bead penetration was developed. Comparison of the results of mathematical model with the corresponding experimental results and PAM-STAMP model was showed in excellent agreement.
KW  - Süzdürme çubuğu
KW  - Matematik Model
KW  - Sac metal şekillendirme
N2  - Drawbeads are used as control mechanism regulated the flow rate at certain locations of the sheet to minimize or prevent defects such as tearing, wrinkling and springback that occur on sheet during a sheet metal forming process. In this study, drawbead restraining force was measured for the sheet metal through blankholder and lower die with a round drawbead with various penetration. This experimental data were used and the mathematical model calculated drawbead restraining force as a function of bead penetration was developed. Comparison of the results of mathematical model with the corresponding experimental results and PAM-STAMP model was showed in excellent agreement.
CR  - (REFERENCES) Tiryaki, A.E., Kozan, R., Çift Fazlı Çelik Sacda Kare Süzdürme Çubuğunun Oluşturduğu Frenleme Kuvvetinin Kestirimi, Mühendis ve Makina, Cilt 51, Sayı 609, 2010.
CR  - Hsu, C.W., Ulsoy, A.G., Demeri M.Y., Development of Process Control in Sheet Metal Forming, Journal of Materials Processing Technology, 127, pp. 361-368, 2002.
CR  - Çiçek, O., Effect of Drawbeads in Sheet Metal Forming, MSc Thesis, Istanbul Technical University, Department of Mechanical Engineering, August, 2005.
CR  - Tiryaki, A.E, Sac Metallerin Şekillendirilmesinde Kullanılan Süzdürme Çubuğunun Modellenmesi ve Kontrolü, Doktora Tezi, Sakarya Üniversitesi, Makina Mühendisliği Bölümü, 2010. http://www.hellotrade.com/interlakentechnology-corporation-usa/product3.html Demeri, M.Y., Drawbeads in Sheet Metal Forming, Journal of Materials Engineering and Performance, 2/6, pp. 863-866, 1993. http://www.globalspec.com/reference/70325/2 03279/ chapter-16-stamping
CR  - PAM-STAMP user manual
UR  - https://doi.org/10.16984/saufbed.27988
L1  - https://dergipark.org.tr/en/download/article-file/192658
ER  -