TY  - JOUR
TT  - FMEA ANALYSIS AND IMPLEMENTATION IN A TEXTILE FACTORY PRODUCING WOVEN FABRIC
AU  - Özyazgan, Vedat
PY  - 2014
DA  - December
JF  - Textile and Apparel
PB  - Ege University
WT  - DergiPark
SN  - 1300-3356
SP  - 303
EP  - 308
VL  - 24
IS  - 3
KW  - HTEA
KW  - Dokuma hataları
KW  - RÖS
KW  - Düzeltme önlemleri
KW  - Dokuma kumaşlar
N2  - Within the scope of this study, the failure possibilities, weight values and detectability values of failures occurring in a factory producing woven fabric were calculated by using Process FMEA. The fixing proposals were offered according to existing failure types. As a result of conducted searches, it was determined that the critical failures in company are weft runs, warp runs, basket, oil stain, slay, taras, leg failures, double weft and weft pile. Among these errors, those with high probability of error are warp breaks and double weft errors. Also it was determined that those failures are caused by weaving machine and personnel. Also it was determined that trained personnel and improved work conditions are critical factors in eliminating the failures
CR  - 1. Akkurt, M. 2002, Kalite Kontrol Kitabı (Quality Control Guide), Birsen Yayınevi, İSTANBUL
CR  - 2. Eryürek, Ö. F., Tanyas, M., 2003 “Hata Türü ve Etkileri Analizi Yönteminde Maliyet Odaklı Yeni Bir Karar Verme Yaklaşımı” Tüdergisi/d Mühensdislik, Cilt:2, Sayı:6 (31-40)
CR  - 3. Franceshini, F., Galetto, M., 2001 “ A New Approach for Evaluation of Risk Priorities of Failure Modes in FMEA” International Journal of Production Research, Vol:39 No:13 (2991-3002), Taylor and Francis Ltd.
CR  - 4. Abdelgawad, M., Fayek, A., R., 2010 “Risk Management in the Construction Industry Using Combined Fuzzy FMEA and Fuzzy AHP” Journal of Construction Engineering and Management.
CR  - 5. Erginel, N., M., 1999 “ Tasrım Hata Türü ve Etkileri Analizinin Etkinliği İçin Bir Model ve Uygulaması” Endüstri Mühendisliği Dergisi, Cilt:15, Sayı:3 (17-26)
CR  - 6. Shain, A., 2003 “Integration of FMEA and the Kano Model: An Explaoratory Examination, International Journal of Quality&Reliability Management, Vol:21, No:7 (731-746)
CR  - 7. Dyadem Engineering Corporation 2003, Guidelines for Failure Mode and Effects Analysis for Automotive, Aerowspace and General Manufacturing Industries, U.S., Dyadem Press
CR  - 8. Chao, L., P., Ishii. K., 2007” Desing Process Error Proofing: Failure Modes and Effects Analysis of the Desing Process”, Journal of Mechanical Design, May 2007, Vol:129 (491-501)
CR  - 9. Tay, K.M., Lim, C.P., 2006 “Fuzzy FMEA with a Guide Rules Reduction System For Priorizaton of Failures”, International Journal of Quality&Reliability Management Vol:23, No:8 (1047-1066)
CR  - 10. MIL-STD 1629 A, Miltary Standart Procedures for Performing a Failure Mode, Affects and Critacally Analysis, ABS Savunma Bakanlığı, Washington DC 20301, 1980
CR  - 11. Bertsche, B.,2008, Rehability in Automotiv and Mechanical Engineering, Springer-Verlag, Berlin Heidelberg, France.
UR  - https://dergipark.org.tr/en/pub/tekstilvekonfeksiyon/issue//251875
L1  - https://dergipark.org.tr/en/download/article-file/218251
ER  -