TY  - JOUR
T1  - Numerical Analysis of the Lamb Metacarpal Bone: Approximation of Bending Tests
AU  - Yılmazçoban, İbrahim Kutay
PY  - 2018
DA  - October
Y2  - 2018
DO  - 10.16984/saufenbilder.333519
JF  - Sakarya University Journal of Science
JO  - SAUJS
PB  - Sakarya University
WT  - DergiPark
SN  - 2147-835X
SP  - 1253
EP  - 1259
VL  - 22
IS  - 5
LA  - en
AB  - In the development of newstrategies for fracture fixation, new methods have to be tested biomechanicallyunder in vitro conditions before clinical trials can be performed. Severalrecent developments, including tensile, compressive, and bending tests freshwhole bone specimens, offer the possibility to understand animal bonesmechanical behavior. Therefore, the aims of the present study were to determinethe effects of three point bending tests on the lamb metacarpal bones atdifferent speeds and determine the mechanical properties of bone and to comparethese properties with the finite element analysis of the tests. 12 specimenswere obtained from 1 year old Ankara curly lambs. Three point bending testswere conducted using three different compression speeds to assess and comparebone fracture properties. From the test results bending moments, stresses,strains and deformations were calculated for three different compressionspeeds. Finite Element Analysis results were compared to the test results.Because of the use fresh bone specimens of an animal part are used like in vivotests in biomechanical studies, investigating failure loads of the metacarpusby bending tests and numerical analysis are guiding for clinical operations andcomputer simulations.
KW  - Finite element analysis
KW  - bending test
KW  - lamb metacarpal bone
KW  - biomechanics
CR  - [1]	D. Vashishth, “Small animal bone biomechanics,” Bone, vol. 43, pp. 794-797, 2008.
CR  - [2]	U. Stefan, B. Michael, S. Werner, “Effects of three different preservation methods on the mechanical properties of human and bovine cortical bone,” Bone, vol. 47, pp. 1048-1053, 2010.
CR  - [3]	ED. Sedlin, “A rheologicmodel for cortical bone. A study of the physical properties of human femoral samples,” Acta Orthop Scand Suppl, vol. 83, pp. 1–77, 1965.
CR  - [4]	ED. Sedlin, C. Hirsch, “Factors affecting the determination of the physical properties of femoral cortical bone,” Acta Orthop Scand, vol. 37, pp. 29–48, 1966.
CR  - [5]	GF. Evans, “Mechanical Properties of Bone,” Charles C. Thomas Springfield, IL, USA, 1973.
CR  - [6]	F. Linde, HC. Sorensen, “The effect of different storage methods on the mechanical properties of trabecular bone,” J Biomech, vol. 26, pp. 1249–52, 1993.
CR  - [7]	M.M. Panjabi, M. Krag, D. Summers, T. Videman, “Biomechanical time-tolerance of fresh cadaveric human spine specimens,” J Orthop Res, vol. 3, pp. 292–300, 1985.
CR  - [8]	C. Ohman, E. Dall'Ara, M. Baleani, S. Van Sint Jan, M. Viceconti, “The effects of embalming using a 4% formalin solution on the compressive mechanical properties of human cortical bone,” Clin Biomech (Bristol, Avon), vol. 23, pp. 1294–8, 2008.
CR  - [9]	J.L. Schriefer, A.G. Robling, S.J. Warden, A.J. Fournier, J.J. Mason, CH. Turner, “A comparison of mechanical properties derived from multiple skeletal sites in mice,” J Biomech, vol. 38, no. 3, pp. 467–75, 2005.
CR  - [10]	R. Jungmann, M.E. Szabo, G. Schitter, Raymond Yue-Sing Tang, D. Vashishth, P.K. Hansma, PJ. Thurner, “Local strain and damage mapping in single trabeculae during three-point bending tests,” Journal of The Mechanical Behavior of Biomedical Materials,” vol. 4, pp. 523-534, 2011.
CR  - [11]	P.J. Thurner, B. Erickson, R. Jungmann, Z. Schriock, J.C. Weaver, G.E. Fantner, G. Schitter, D.E. Morse, P.K. Hansma, “High-speed photography of compressed human trabecular bone correlates whitening to microscopic damage,” Eng. Fract. Mech, vol. 74, no. 12, pp. 1928–1941, 2007.
CR  - [12]	C. Kokoroghiannis, I. Charopoulos, G. Lyritis, P. Raptou, T. Karachalios, N. Papaioannou, “Correlation of pQCT bone strength index with mechanical testing in distraction osteogenesis,” Bone, vol. 45, pp. 512-516, 2009.
CR  - [13]	B. Borah, G.J. Gross, T.E. Dufresne, T.S. Smith, M.D. Cockman, P.A. Chmielewski, M.W. Lundy, J.R. Hartke, E.W. Sod, “Three-dimensional microimaging (MRmicroI and microCT), finite element modeling, and rapid prototyping provide unique insights into bone architecture in osteoporosis,” Anat. Rec, vol. 265, no. 2, pp. 101–110, 2001.
CR  - [14]	B. van Rietbergen, “Micro-FE analyses of bone: state of the art,” Adv. Exp. Med. Biol, vol. 496, pp. 21–30, 2001.
CR  - [15]	B. van Rietbergen, S. Majumdar, D. Newitt, B. MacDonald, “High-resolution MRI and micro-FE for the evaluation of changes in bone mechanical properties during longitudinal clinical trials: application to calcaneal bone in postmenopausal women after one year of idoxifene treatment,” Clin. Biomech. (Bristol, Avon), vol. 17, no 2, pp. 81–88, 2002.
CR  - [16]	R. Muller, G.H. van Lenthe, “Trabecular bone failure at the microstructural level,” Curr. Osteoporos. Rep, vol. 4, no. 2, pp. 80–86, 2006.
CR  - [17]	Z. Li, M.W. Kindig, J.R. Kerrigan, C.D. Untaroiu, D. Subit, J.R. Crandall, R.W. Kent, “Rib fractures under anterior–posterior dynamic loads: Experimental and finite-element study,” Journal of Biomechanics, vol. 43, pp. 228-234, 2010.
CR  - [18]	J.M. Cormier, J.D. Stitzel, S.M. Duma, F. Matsuoka, “Regional variation in the structural response and geometrical properties of human ribs,” Proceedings of Association for the Advancement of Automotive Medicine, vol. 9, pp. 153–170, 2005.
CR  - [19]	G. Granik, I. Stein, “Human ribs: static testing as a promising medical application,” Journal of Biomechanics, vol. 6, pp. 237–240, 1973.
CR  - [20]	A.R. Kemper, C. McNally, E.A. Kennedy, S.J. Manoogian, A.L. Rath, T.P. Ng, J.D. Stitzel, E.P. Smith, S.M. Duma, “Material properties of human rib cortical bone from dynamic tension coupon testing,” Stapp Car Crash Journal, vol. 49, pp. 199–230, 2005.
CR  - [21]	A.R. Kemper, C. McNally, C.A. Pullins, L.J. Freeman, S. Duma, “The biomechanics of human ribs: material and structural properties from dynamic tension and bending tests,” Stapp Car Crash Journal, vol. 51, pp. 235–273, 2007.
CR  - [22]	D.R. Schultz, A.B. Benson, C. Hirsch, “Force-deformation properties of human ribs,” Journal of Biomechanics, vol. 7, pp. 303–309, 1974.
CR  - [23]	I.D. Stein, G. Granik, “Rib structure and bending strength: an autopsy study,” Calcified Tissue Research, vol. 20, pp. 61–73, 1976.
CR  - [24]	J.D. Stitzel, J.M. Cormier, J.T. Barretta, E.A. Kennedy, E.P. Smith, A.L. Rath, S.M. Duma, F. Matsuoka, “Defining regional variation in the material properties of human rib cortical bone and its effect on fracture prediction,” Stapp Car Crash Journal, vol. 47, pp. 243–265, 2003.
CR  - [25]	N. Yoganandan, F.A. Pintar, “Biomechanics of human thoracic ribs,” Journal of Biomechanical Engineering, vol. 120, pp. 100–104, 1998.
CR  - [26]	J.W. Farah, R.G. Craig, K.A. Meroueh, “Finite element analysis of three- and four-unit bridges,” J. Oral. Rehabil, vol. 16, no. 6, pp. 603–611, 1989.
UR  - https://doi.org/10.16984/saufenbilder.333519
L1  - https://dergipark.org.tr/en/download/article-file/437327
ER  -