TY  - JOUR
T1  - Deniz dibi tarama malzemesinin faydalı kullanımı için yıkama-eleme tesisi tasarımı ve yıkama-eleme prosesi atıksuyunun yönetimi
TT  - Washing-sieving plant design for the beneficial use of marine dredged material and management of wastewater from washing-sieving process
AU  - Başar, H. Merve
AU  - Güzel, Barış
AU  - Özer-erdoğan, Pembe
AU  - Murat-hocaoğlu, Selda
AU  - Özel, Doğan
AU  - Ergenekon, Şeyla
AU  - Tolun, G. Leyla
PY  - 2018
DA  - April
Y2  - 2018
DO  - 10.16984/saufenbilder.336784
JF  - Sakarya University Journal of Science
JO  - SAUJS
PB  - Sakarya University
WT  - DergiPark
SN  - 2147-835X
SP  - 735
EP  - 747
VL  - 22
IS  - 2
LA  - tr
AB  - Bu çalışma, dip taramafaaliyetleri neticesinde ortaya çıkan dip tarama malzemelerinin (DTM) betonuygulamalarında ince agrega olarak faydalı kullanımı için bir yıkama-elemetesisi tasarlanmasını, bu tesise ait ilk yatırım ve işletme maliyetlerininortaya konulmasını ve laboratuvar ölçekli DTM yıkama-eleme denemeleri sonucundaortaya çıkan atıksuyun karakterizasyonunun ve yönetiminin belirlenmesini kapsamaktadır.Bu çalışma ile DTM’nin yıkama-eleme ön işlemine tabi tutulması durumunda yüksekklorür, sülfat ve su içeriğinin giderilerek ince agrega olarak betonçalışmalarında kullanılabileceği, oluşan yıkama-eleme atıksuyununkanalizasyona/denize deşarjına risk oluşturacak herhangi bir kirleticiiçermediği tespit edilmiş olup olası 1.500 m3/gün kapasiteli DTMyıkama-eleme tesisinin ilk yatırım ve işletme maliyetlerinin sırasıyla6.753.600 TL ve 2.366.810 TL ve birim maliyeti ise 6,3 TL/ton olarakhesaplanmıştır.
KW  - Atıksu Karakterizasyonu
KW  - Atıksu Yönetimi
KW  - Dip Tarama Malzemesi
KW  - Faydalı Kullanım
KW  - Yıkama-Eleme Tesisi
N2  - Themanagement of dredging materials (DM), which is generated from marine dredgingacitivities is a global problem. DMs in our country are usually dumped at seaby barges and pose a serious risk to the aquatic environment. In this study,the characterization of the DMs excavated by dredging operations and thecharacterization of their washing wastewaters are determined and the design ofa washing-sieving plant for the beneficial use of DM as a fine aggregate inconcrete applications is carried out. Furthermore the cost analysis of thewashing-sieving plant planned to be established for pilot regions is peformed.The findings of this study indicate that DM can be used as a fine aggregate inconcrete applications in case of subjecting to the washing-sievingpre-treatment process, generated washing-sieving wastewater does not involveany contaminant causing a risk to the sewage/sea discharge. The firstinvestment and operating costs of possible DM washing-sieving plant’s having acapacity of 1,500 m3/day are predicted to be 6,753,600 TL and2,366,810 TL, respectively, and the unit cost is presumed as 6.3 TL/ton.
CR  - C. Sheehan and J. Harrington, "Management of dredged material in the Republic of Ireland-a review," Waste Management, vol. 32, pp. 1031-1044, 2012.
CR  - United Nations Conference on Trade and Development (UNCTAD), “Review of Maritime Transport,” UNCTAD/RMT/2015, United Nations Publication, Geneva, Switzerland, 2015.
CR  - UDHB, “Deniz Ticareti 2014 Yılı İstatistikleri - Deniz Taşıtları, Denizyolu Taşıma, Teşvik ve Gemi Sanayi İstatistikleri,” Ulaştırma Denizcilik ve Haberleşme Bakanlığı, Ankara, Türkiye, 2015.
CR  - R. N. Bray, “Environmental Aspects of Dredging,” IADC/CEDA and Taylor & Francis Publishers, London, United Kingdom, 2008
CR  - R. Zentar, D. Wang, N. E. Abriak, M. Benzerzour, W. Chen, “Utilization of siliceous-aluminous fly ash and cement for solidification of marine sediments,” Construction and Building Materials, vol. 35, pp. 856–863, 2012.
CR  - H. Cho, J. Shim, J. Park, “Performance evaluation of solidification/ stabilization of dredged sediment using alkali-activated slag,” Desalination and Water Treatment, vol. 57, pp. 10159–10168, 2016.
CR  - C. Alzieu, “Dredging and Marine Environment, State of the Art,” Ifremer, Plouzané, France, 1999.
CR  - R. Boutin, “Improvement of Knowledge about the Outputs of Dredging Products as Mud in Sea: Phenomena Short Term- Close Field,” Lyon, France, 1999.
CR  - J. Vermeulen, S. G. Van Dijk, J. T. C. Grotenhuis, W. H. Rulkens, “Quantification of physical properties of dredged sediments during physical ripening,” Geoderma, vol. 129, pp. 147–166, 2005.
CR  - A. Netzband, A. L. Hakstege, K. Hamer, “Treatment and Confined Disposal of Dredged Material – Part 2: Dutch-German Exchange on Dredged Material,” Germany, 2002.
CR  - L.A. Murray, “Dredged material as a resource,” Terra et Aqua, vol. 112, pp.3-10, 2008.
CR  - V. Dubois, N. E Abriak, R. Zentar, G. Ballivy, “The use of marine sediments as a pavement base material,” Waste Management, vol. 29, pp. 774–782, 2009.
CR  - OSPAR Commission, “JAMP Assessment of the Environmental Impact of Dumping of Wastes at Sea,” Oslo-Paris Commission, Biodiversity Series, London, United Kingdom, pp. 433, 2009.
CR  - LIFE, “Methods for Management and Re-use of Polluted Sediments,” European Project Realized by in vivo, France, 2002 (in French).
CR  - P. Grégoire, “Conceptual Model for Help with Multi-criterion Decision-taking in the Framework of the Negotiated Choice for a Marine Dredging Scenario,” France, pp. 281, 2004 (in French).
CR  - F. Agostini, F. Skoczylas, Z. Lafhaj, “About a possible valorisation in cementicious materials of polluted sediments after treatment,” Cement and Concrete Composites, vol. 29, pp. 270–278, 2007.
CR  - J. Lukens, “An Analysis of State, Territory & Commonwealth Policies Related to Dredging & Dredged Material Management,” Vol. I/II, OCRM/ CPD Coastal Management Program Policy Series, Technical Document 00–02, 2000.
CR  - P. R. Krause, K. A. McDonnell, “The Beneficial Reuse of Dredged Material for Upland Disposal,” California, USA, 2000.
CR  - J. P. Ulbricht, “Contaminated Sediments: Raw Materials for Bricks,” Symposium Dragage, 2002.
CR  - Port of Baltimore, “Up for Grabs-innovative Solutions Are Being Found for Dredged Material,” The Port of Baltimore Magazine, Maryland, 2009.
CR  - C. Sheehan, J. R. Harrington, J. D. Murphy, “A technical assessment of topsoil production from dredged material,” Resources, Conservation and Recycling, vol. 54 pp. 1377–1385, 2010.
CR  - D. J. Yozzo, P. Wilber, R. J. Will, “Beneficial use of dredged material for habitat creation, enhancement, and restoration in New York- New Jersey Harbor,” Journal of Environmental Management, vol. 73 pp. 39–52, 2004.
CR  - K. Reine, D. Clarke, C. Dickerson, “Fishery resource utilization of a restored estuarine borrow pit: a beneficial use of dredged material case study,” Marine Pollution Bulletin, vol. 73, pp. 115–128, 2013.
CR  - J. Limeira, M. Etxeberria, L. Agulló, D. Molina, “Mechanical and durability properties of concrete made with dredged marine sand,” Construction and Building Materials, vol. 25, pp. 4165–4174, 2011.
CR  - I. Said, A. Missaoui, Z. Lafhaj, “Reuse of Tunisian marine sediments in paving blocks: factory scale experiment,” Journal of Cleaner, Production, vol. 102 pp. 66–77, 2015.
CR  - V. Cappuyns, V. Deweirt, S. Rousseau, “Dredged sediments as a resource for brick production: possibilities and barriers from a consumers’ perspective,” Waste Management, vol. 38, pp. 372–380, 2015.
CR  - Y. T. Kim and B. Pradhan, “Mechanical and germination characteristics of stabilized organic soils,” Marine Georesources & Geotechnology, vol. 0, pp. 1-8, 2015.
CR  - J. Park, Y. Son, S. Noh, T. Bong, “The suitability evaluation of dredged soil from reservoirs as embankment material,” Journal of Environmental Management, vol. 183, pp. 443-452, 2016.
CR  - S. Lirer, B. Liguori, I. Capasso, A. Flora, D. Caputo, “Mechanical and chemical properties of composite materials made of dredged sediments in a fly-ash based geopolymer,” Journal of Environmental Management, vol. 191, pp. 1-7, 2017.
CR  - V. Mymrin, J. C. Stella, C. B. Scremim, R. C. Y. Pan, F. G. Sanches, K. Alekseev, D. E. Pedroso, A. Molinetti, O. M. Fortini, “Utilization of sediments dredged from marine ports as a principal component of composite material,” Journal of Cleaner Production, vol. 142, pp. 4041-4049, 2017.
CR  - AYY, “Atık Yönetimi Yönetmeliği,” Resmi Gazete No.: 29314, Çevre ve Şehircilik Bakanlığı, Ankara, 2015.
CR  - D. E. Averett and T. J. Estes, “Physical Separation Process Demonstrations-A Review of Three Dredging Projects,” DOER Technical Notes Collection, ERDC TN-DOER-T10, Vicksburg, MS, USA, 2011.
CR  - J. Riordan, J. P. Murphy, J. R. Harrington, “Construction and Demolition Waste and Dredge Material as Landfill Liner in Ireland,” 1st Middle European Conference on Landfill Technology, 2008.
CR  - M. A. Chikouche, E. Ghorbel, M. Bibi, “The possibility of using dredging sludge in manufacturing cements: optimization of heat treatment cycle and ratio replacement,” Construction and Building Materials, vol. 106, pp. 330-341, 2016.
CR  - W. Liu, H. Cui, Z. Dong, F. Xing, F. Zhang, T. Y. Lo, “Carbonation of concrete made with dredged marine sand and ıts effect on chloride binding,” Construction and Building Materials, vol. 120, pp. 1-9, 2016.
CR  - GLC, “Beneficial Uses of Great Lakes; Dredged Material: A Report of the Great Lakes Beneficial Use Task Force,” Great Lake Commission, Ann Arbor, USA, 2001.
CR  - C. W. Mallory, M. A. Nawrocki, “Containment Area Facility Concepts for Dredged Material Separation, Drying and Rehandling,” Contract Report D-74-6, MS: U.S. Army Engineer Waterways Experiment Station, Vicksburg, USA, 1974.
CR  - P. J. Kelly, “In USACE/American Association of Port Authorities Quality Partnership Initiative-Emerging Technologies,” Miami River Project, VA: American Association of Port Authorities, USA, 2008.
CR  - A. Taylor, J. McWilliams, H. Van Dam, B. Lammers, "Deepening, cleaning and processing sediment from the miami river,” Terra et Aqua, no. 103, pp. 23-30, 2006.
CR  - D. E. Highley, L. E. Hetherington, T. J. Brown, D. J. Harrison, G. O. Jenkins, “The Strategic Importance of the Marine Aggregate Industry to the UK,” Research Report OR/07/019, Nottingham, United Kingdom, 2007.
CR  - GLC, “Beneficial Use of Dredged Material in the Great Lakes,” Great Lakes Commission, Ann Arbor, MI, USA, 2013.
CR  - Ravenna Port Authority, “Sistemazione Materiale da Scavo, Ravenna: AutoritàPortuale,” Ravenna, ITALY, 2011.
CR  - G. Maurizio, "Mechanical treatment of dredged material: the malcontenta plant in the lagoon of venice,” Terra et Aqua, no. 76, pp. 22-29, 1999.
CR  - TÜBİTAK MAM, “Deniz Dip Tarama Uygulamaları ve Tarama Malzemesinin Çevresel Yönetimi (DİPTAR),” Final Raporu, Proje No: 111G036, TÜBİTAK KAMAG 1007 Projesi, Kocaeli, Türkiye, 2016.
CR  - USACE, 2001, Long-Term Management Strategy (LTMS) for the Placement of Dredged Material in the San Francisco Bay Region, Appendix R: Dredged material at landfills, USA.
CR  - SM, 2012, Standard Methods for the Examination of Water and Wastewaters, 22nd ed., APHA/AWWA/Water Environment Federation, American Public Health Association Publication, Washington, USA.
CR  - T. J. Olin-Estes and M. R. Palermo, “Recovery of dredged material for beneficial use: the future role of physical separation processes,” Journal of Hazardous Materials, vol. 85, pp. 39-51, 2001.
CR  - J. O. Kim, J. Choi, S. Lee, J. Chung, “Evaluation of hydrocyclone and post-treatment technologies for remediation of contaminated dredged sediments,” Journal of Environmental Management, vol. 166, pp. 94-102, 2016.
UR  - https://doi.org/10.16984/saufenbilder.336784
L1  - https://dergipark.org.tr/en/download/article-file/454593
ER  -