TY  - JOUR
T1  - Investigation of Dry Sliding Wear Behavior of Powder Metal (P/M) Materials Produced from Mixture of Fe-Cu-C Powders
AU  - Arık, Halil
AU  - Orhun, Dilruba Zümer
PY  - 2018
DA  - March
JF  - Gazi University Journal of Science Part A: Engineering and Innovation
JO  - GU J Sci, Part A
PB  - Gazi University
WT  - DergiPark
SN  - 2147-9542
SP  - 37
EP  - 48
VL  - 5
IS  - 1
LA  - en
AB  - AbstractIn this study, dry sliding wear behavior of powder metal parts producedfrom ASC.100.29 iron powder has 0.28-40 μm particle size range and containing 2% Cu and 0.75 % C were investigated using pin-on-disk method. In order to obtain cylindrical samples within10 mm diameter and 20 mm length iron powder were compacted at 800 MPa pressurein a single action press. Then compacted powder metal parts were sintered at1100 °C temperature for two hours in an atmosphere controlled tube furnace.After the sintering process, micro structural analysis, hardness and densitymeasurements of powder metal parts were performed. After, the characterization of samples drysliding wear tests were performed according to ASTM-G55-05 by using TRIBOMETERT10/20 pin-on-disk wear device. Wear tests werecarried out at different loads (10-15-20 N), with the other test parameters beingconstant, to investigate the wear behavior of powder metal parts in relation toload. The test results showed that the increasing ofload resulted in increase of wear values.
KW  - Powder metallurgy
KW  - Pin-on-disk
KW  - Dry sliding wear
CR  - Prof. Dr. Mustafa AYDIN
Prof. Dr. Recep ÇALIN
Yrd. Doç. Dr. Hasan HASIRCI
UR  - https://dergipark.org.tr/en/pub/gujsa/issue//357432
L1  - https://dergipark.org.tr/en/download/article-file/446986
ER  -