TY  - JOUR
TT  - ANALYSIS OF THE TEMPERATURE EFFECT ON THE PLASTIC STRAIN OF POLYMERS DURING HIGH PRESSURE TORSION (HPT) PROCESS
AU  - Drai, Ahmed
AU  - Aour, Benaoumeur
PY  - 2017
DA  - November
JF  - The Eurasia Proceedings of Science Technology Engineering and Mathematics
JO  - EPSTEM
PB  - ISRES Publishing
WT  - DergiPark
SN  - 2602-3199
SP  - 41
EP  - 51
IS  - 1
KW  - HPT
KW  - HDPE
KW  - finite element
KW  - plastic strain
KW  - temperature
N2  - The high pressure torsion(HPT) is an efficient process to obtain enhanced microstructures viasuper-plastic deformation. In view of its optimization, it is of primeimportance to assess the relationships between processing conditions andmaterial flow. More precisely, detailed knowledge of the plastic straindistribution in the deformed material in relation to HPT processing variablesis very useful. In this context, the present work is focused primarily tohighlight the effect of the temperature on the plastic strain distribution intothe processed polymers by HPT. The effect of the sample thickness is alsostudied. To this end, the material parameters of an elasto-viscoplasticphenomenological model were derived from compressive tests at differenttemperatures and strain rates on a typical thermoplastic polymer (high densitypolyethylene (HDPE)). The distribution of the equivalent plastic strain and theloading conditions were analysed. Recommendations on process conditions wereproclaimed at the end of this work.
CR  - B. Aour,  F. Zaïri, J.M. Gloaguen, M. Naït-Abdelaziz, & J.M. Lefebvre, (2008). “A computational study of die geometry and processing conditions effects on equal channel angular extrusion of a polymer”, Int. J. Mech. Sci., vol. 50, pp. 589-602.
B. Aour, F. Zaïri, , J.M. Gloaguen, , M. Naït-Abdelaziz, & J.M. Lefebvre, (2009). “Finite element analysis of plastic strain distribution in multi-pass ECAE process of high density polyethylene”, J. Manuf. Sci. Eng. ASME., vol. 131,  no. 3, pp.  031016-11.
B. Aour, F. Zaïri, J.M. Gloaguen, M. Naït-Abdelaziz, & J.M. Lefebvre, (2010). “Analysis of polypropylene deformation in a 135° ECAE die: experiments and three-dimensional finite element simulations”, Key. Eng. Mater., vol. 423, pp. 71-78. 
M.C. Boyce, S. Socrate, & P.G. Llana, (2000). “Constitutive model for the finite deformation stress-strain behavior of poly(ethylene terephthalate) above the glass transition”, Polym., vol. 41, pp. 2183-2201. 
A. Draï, & B. Aour, (2013). “Analysis of plastic deformation behavior of HDPE during high pressure torsion process”,  Engineering Structures, vol. 46, pp. 87-93. 
J.Y. Huang, Y.T. Zhu, H. Jiang, & T.C. Love, (2001). “Microstructure and dislocation configuration in nanostructured Cu processed by repetitive corrugation and straightening”, Acta Materialia, vol. 49, pp. 1497-1505. 
S. Kobayashi, S.I. Oh & T. Altan, (1988). “Metal Forming and the Finite-Element Method”, 1st ed., Oxford University Press, New York, USA. 
D. Mousumi, D. Goutam, G. Mainak, W. Matthias, V. Rajnikant & C.S. Ghosh, (2012). “Microstructures and mechanical properties of HPT processed 6063 Al alloy”, Materials Science & Engineering, vol. A558, pp. 525-532. 
J. Richert, & M. Richert, (1986). “A new method for unlimited deformation of metals and alloys”, Aluminium , vol. 62 , no.8, pp. 604-607. 
Y. Saito, H. Utsunomiya, N. Tsuji, & T. Sakai, (1999). “Novel ultra-high straining process for bulk materials development of accumulative roll-bonding (ARB) process”, Acta Mater., vol. 47, pp. 579-583. 
V.M. Segal, (1995). “Materials Processing by simple shear”, Mater. Sci. Eng., vol. A 197, pp. 157-164. 
B. Srinivas, C. Srinivasu, , B. Mahesh & M.A. Aqheel, (2013). “Review on Severe Plastic Deformation”,  Adv. Mater. Manufacturing & Characterization,  vol. 3, no. 1, pp. 291-296. 
T.A. Tervoort, , R.J.M. Smit, , W.A.M. Brekelmans, & L. Govaert, (1998). “A constitutive equation for the elasto-viscoplastic deformation of glassy polymers”, Mech. Time-Depend. Mater., vol. 1, pp. 269-291. 
R.Z. Valiev, R.K. Islamgaliev, & I. V. Alexandrov, (2000). “Bulk Nanostructured Materials from Severe Plastic Deformation”, Prog. Mater. Sci., vol. 45, 103-189.
UR  - https://dergipark.org.tr/en/pub/epstem/issue//364337
L1  - https://dergipark.org.tr/en/download/article-file/379910
ER  -