TY  - JOUR
T1  - A Framework for Production Capacity and Time Utilization of Mono Product Sequential Process Plants
AU  - Olabanji, Olayinka Mohammed
PY  - 2019
DA  - June
Y2  - 2019
JF  - International Journal of Engineering Technologies IJET
JO  - IJET
PB  - İstanbul Gelisim University
WT  - DergiPark
SN  - 2149-0104
SP  - 38
EP  - 49
VL  - 5
IS  - 2
LA  - en
AB  - This article addresses the challenges of estimating production capacityand time utilization problem in a sequential process plant. A framework andmathematical model are presented to aid the analysis and understanding of theproposed solution. A set of constraints is provided in order to specify therequirements for production capacity and time utilization planning in asequential process plant. In order to ascertain the performance of theframework, the mathematical models derived are tested using an existingdesigned process plant and the results obtained from the evaluation are also presented.The proposed model generates the utilized time for the process plant per batchand also the production capacity of the process plant as well as the productionrates of individual machines in the process plant. Application of the model toan existing process plant demonstrates that the addition of buffer storage to storework in progress materials in a mono product sequential process plant willincrease the production rate of the plant but the production rate of themachines in the plant remains constant. Also, the addition of buffer storagewill increase the time utilized by the process plant to complete its operationper batch.cess plant and the results obtainedfrom the evaluation are also presented. The proposed model generates theutilized time for the process plant per batch and also the production capacityof the process plant as well as the production rates of individual machines inthe process plant. The application of this model to an existing process plantdemonstrates that the introduction of buffer for work in progress in a monoproduct sequential process plant will increase the production rate of the plantas a whole but the production rate of the machines in the plant remainsconstant. Also, the addition of buffer storage will increase the time utilizedby the process plant per batch.
KW  - Process plants
KW  - Production capacity and planning
KW  - production framework
CR  - C. S. Chen, S. Mestry, P. Damodaran and C. Wang, “The capacity planning problem in make-to-order enterprises”. Mathematical and Computer Modelling. Vol. 50, No. 9, pp. 1461-1473, July 2009.
CR  - S. C Graves, Manufacturing planning and control. Massachusetts institute of technology. Oxford University Press, New York, 2002 pp. 728-746, Ch 2, Section 18.5.
CR  - T. A. Kletz, and P. Amyotte, Process plants. A handbook for inherently safer design, 2nd ed., CRC Press Taylor & Francis Group 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742, 2010, pp. 241-250.
CR  - R. Smith, Chemical Process: Design and Integration. John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester, West Sussex PO19 8SQ, England. 2005, pp. 17-57
CR  - M. P. Groover. Automation, production systems, and computer-integrated manufacturing. 4th ed. Prentice Hall Press, Pearson Higher Education, Inc., Upper Saddle River, NJ 07458, 2015, pp. 36-74.
CR  - S. P. Ayodeji, O. M Olabanji and M. K. Adeyeri, “Design of a Process Plant for the Production of Poundo yam”, International Journal of Engineering, Vol. 6, No. 2, pp. 10-24, February 2012.
CR  - S. Raundal, R. Badgujar, R. More and M. Nagare, “Capacity Planning Model for Manufacturing Organizations using AHP”, International Journal of Engineering Research and Technology. IJERT. Vol. 5, No. 7, pp. 137-140, 2016.
CR  - J. L. A. Koolen, Simple and Robust Plant Design. Design of Simple and Robust Process Plants. Singapoer, Toronto: Wiley VCH Verlag GmbH & Co. KGaA Germany 2002. pp. 23-34.
CR  - S. Rajagopalan and J. M. Swaminathan, “A Coordinated Production Planning Model with Capacity Expansion and Inventory Management”, Management Science INFORMS, Vol. 47, No. 11, pp. 1562–1580. November 2001.
CR  - O. E. Maimon, E. Khmelnitsky, and K. Kogan, Optimal flow control in manufacturing systems: Production Planning and Scheduling. Vol. 18: Springer Science & Business Media 2013. pp. 59-77
CR  - D. K. Harrison and D. J. Petty. Systems for planning and control in manufacturing. Newnes, An imprint of Elsevier Science Linacre House, Jordan Hill, Oxford OX2 8DP 225 Wildwood Avenue, Woburn MA 01801-2041 Butterworth-Heinemann, 2002, pp. 5-47.
CR  - C. I Hsu and H. C Li, “Reliability evaluation and adjustment of supply chain network design with demand fluctuations”, International Journal of Production Economics. Vol. 132, No. 1, pp. 131-145, 2011.
CR  - J. R. Bradley and P. W. Glynn, “Managing Capacity and Inventory Jointly in Manufacturing Systems”, Management Science INFORMS Vol. 48, No. 2, pp. 273–288, February
2002.
CR  - C. I Hsu and H. C Li, “An integrated plant capacity and production planning model for high-tech manufacturing firms with economies of scale”, International Journal of Production Economics. Vol. 118, No. 2, pp. 486-500, 2009.
CR  - A. Russell, P. E. Ogle, R. Andrew and P. E. Carpenter, “Calculating the Capacity of Chemical Plants”, American Institute of Chemical Engineers (AIChE), CEP Vol. 14, No.8, pp. 59-63, August 2014.
CR  - A. Dasci and V. Verter, “Evaluation of Plant focus strategies: A continuous approximation framework”, Annals of Operations Research, Vol. 136, No. 1 pp. 303-327, April 2005.
CR  - M. Barut and V. Sridharan, “Design and evaluation of a dynamic capacity apportionment procedure”, European Journal of Operational Research. Vol. 155, No. 1, pp. 112-
133, January 2004
CR  - M. Kolhe, “Techno-Economic Optimum Sizing of a Stand-Alone solar Photovoltaic System”, IEEE Transactions on Energy Conversion Vol. 24, No. 2, pp. 511-518, June 2009.
CR  - J. M. Marvel Schaub, and G. Weckman, “Assessing the availability and allocation of production capacity in a fabrication facility through simulation modeling: a case study”, International Journal of Industrial Engineering: Theory, Applications and Practice. Vol. 15, No. 2, pp. 166-175, 2008.
CR  - O. M. Olabanji, Design of a Process Plant for the Prodution of Poundo Yam: A Thesis Submitted for the Award of Master of Engineering in Mechanical Engineering Department. Federal University of Technology Akure Ondo State Nigeria, 2012. pp. 163-167.
CR  - M. O. Oke, S. Awonorin, O. Oyelade, J. Olajide, G. Olaniyan, and P. Sobukola, “Some thermo-physical properties of yam cuts of two geometries”, African Journal of Biotechnology. Vol. 8, No. 7, pp. 1300-1304, 2009.
CR  - F. A Tetchi, A. Rolland‐Sabaté, G. N. G Amani, and P. Colonna, “Molecular and physicochemical characterization of starches from yam, cocoyam, cassava, sweet potato and
ginger produced in the Ivory Coast”, Journal of the Science of Food and Agriculture. Vol. 87, No. 10, pp. 1906-1916, 2007.
CR  - O. O. Paul, K. Claire and D. Jacques, “Effects of planting methods and tuber weights on growth and yield of yam cultivars (Dioscorea rotundata Poir.) in Gabon”, International Research Journal of Agricultural Science and Soil Science. Vol. 6, No. 3, pp. 032-042, 2016
CR  - S. N. Moorthy, “Physicochemical and functional properties of tropical tuber starches: a review”, Starch‐Stärke. Vol. 54, No. 12, pp. 559-592. December, 2002.
UR  - https://dergipark.org.tr/en/pub/ijet/article/509228
L1  - https://dergipark.org.tr/en/download/article-file/716786
ER  -