TY  - JOUR
T1  - Nano Clay Additive Effect on Shear Strength of GFRP Joints
AU  - Erkliğ, Ahmet
AU  - Çakır, Mehmet Veysel
AU  - Bozkurt, Ömer Yavuz
PY  - 2019
DA  - December
Y2  - 2019
DO  - 10.16984/saufenbilder.523889
JF  - Sakarya University Journal of Science
JO  - SAUJS
PB  - Sakarya University
WT  - DergiPark
SN  - 2147-835X
SP  - 1115
EP  - 1122
VL  - 23
IS  - 6
LA  - en
AB  - Adhesivelybonding joints are widely used in various industries such as aviation,automotive and marine due to its advantages such as lightness, sealing ability,low cost, corrosion resistance and uniform stress distribution. Increasing thequality and durability of adhesives using various methods is a matter ofinterest both in science and engineering. This study investigates the role ofthe addition of Nano-clay particles to epoxy resin on the shear strength ofsingle lap GFRP bonding joints. For this aim, Nano-silica particles were addedin epoxy resin, 1%, 2%, 3% and 5% by weight. The experimental results obtainedfrom lap shear test showed that the increase in shear strength was about 36, 91and 63% for 1, 2 and 3 wt. respectively.
KW  - Single-lap joints
KW  - Nano-clay particles
KW  - GFRP
CR  - A. R. Bunsell, J. Renard: Fundamentals of fiber reinforced composite materials. CRC Press, IOP Publishing Ltd, London (2005).
CR  - M. D. Banea, L.F. da Silva: Adhesively bonded joints in composite materials: an overview. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 223(1) pp. 1-18, 2009.
CR  - E. Sancaktar, J. Kuznicki. Nanocomposite adhesives: Mechanical behaviour with nanoclay. International Journal of Adhesion and Adhesives, 31(5) pp.286-300, 2011.
CR  - A. Tutunchi, R. Kamali, A. Kianvash: Adhesive strength of steel–epoxy composite joints bonded with structural acrylic adhesives filled with silica nanoparticles. Journal of Adhesion Science and Technology, vol. 29, no. 3, pp. 195–206, 2015.
CR  - D. Guo, X. Guoxin, L. Jianbin: Mechanical properties of nanoparticles: basics and applications. Journal of Physics D: Applied Physics, vol. 47, pp.1-25, 2014.
CR  - L.Zhai, L. Guoping, L. Jian, Y. Wang: The effect of nanoparticles on the adhesion of epoxy adhesive. Materials Letters, vol. 60, pp. 3031–3033, 2006.
CR  - P. Ghabezi, M. Farahani: Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles. Journal of Computational Applied Mechanics, vol. 47, no. 2, pp. 231-239, 2016
CR  - S. Akpınar: Al.üminyum Oksit ve Titanyum Dioksit Takviyeli Yapıştırıcılarla Birleştirilmiş Bağlantıların Mekanik Özelliklerinin Deneysel Olarak Belirlenmesi. Niğde Üniversitesi Mühendislik Bilimleri Dergisi, vol. 5, no. 2, pp. 244-252, 2016.
CR  - A.S. Neto, D.T. Lopes da Cruza , A.F. Avila: Nano-modified adhesive by graphene: the single lap-joint case. Materials Research, vol. 16, no.3, pp. 592-596, 2013.
CR  - Y. Suzhu, M. N. Tong, G. Critchlow: Use of carbon nanotubes reinforced epoxy as adhesives to join aluminum plates. Materials and Design, vol. 31, pp. 126–129, 2010.
CR  - S.M.R. Khalili, M. Tavakolian, A. Sarabi: Mechanical Properties of Nanoclay Reinforced Epoxy Adhesive Bonded Joints Made with Composite Materials. Journal of Adhesion Science and Technology, vol. 24, pp. 1917–1928, 2010.
CR  - S. Sinha Ray, M. Okamoto: Polymer/Layered Silicate Nanocomposites: A Review From Preparation to Processing. Progress in Polymer Science, vol. 28, pp. 1539–1641, 2003.
CR  - A. Gu, G. Liang: Thermal Degradation Behaviour and Kinetic Analysis of Epoxy/Montmorillonite Nanocomposites. Polymer Degradation and Stability, vol. 80, pp. 383–391, 2003.
CR  - R. Jeyakumar, P.S. Sampath, R. Ramamoorthi, T. Ramakrishnan: Structural, Morphological and Mechanical Behaviour of Glass Fibre Reinforced Epoxy Nanoclay Composites. International Journal Advanced Manufecturing Technologies, vol. 93, pp. 1-9, 2017.
CR  - M. Galimberti, V.R. Cipolletti, M. Coombs: Applications of Clay–Polymer Nanocomposites. Handbook of Developes in Clay Science, vol. 5, pp. 539-586, 2013.
CR  - A. Yasmin, J. L. Abot, I.M. Daniel: Processing of clay/epoxy nanocomposites by shear mixing. Scripta Materialia, vol. 49, no. 1, pp. 81-86, 2003.
CR  - X. Kornmann, H. Lindberg, L.A. Berglund: Synthesis of epoxy–clay nanocomposites: influence of the nature of the clay on structure. Polymer, vol. 42, no. 4, pp. 1303-1310, 2001.
CR  - R.D. Adams: Adhesive bonding: science, technology and applications, Cambridge: Elsevier, Woodhead Publishing Limited. (2005).
CR  - M.B. Saeed, M.S. Zhan: Adhesive strength of nano-size particles filled thermoplastic polyimides. Part-I: Multi-walled carbon nano-tubes (MWNT)–polyimide composite films. International Journal of Adhesion and Adhesives, vol. 27, no. 4, pp. 306-318, 2007
CR  - A. C. Garg, Y. W. Mai: Failure mechanisms in toughened epoxy resins—A review. Composites Science and Technology, vol. 1, no. 3, pp. 179-223, 1988
UR  - https://doi.org/10.16984/saufenbilder.523889
L1  - https://dergipark.org.tr/en/download/article-file/793009
ER  -