TY  - JOUR
T1  - Evaluation of an Experimental Setup Developed For Measuring the Friction Coefficients
AU  - Işık, Doğuhan Ufuk
AU  - Akata, Hüseyin Erol
PY  - 2018
DA  - July
JF  - International Journal of Electronics Mechanical and Mechatronics Engineering
JO  - IJEMME
PB  - Istanbul Aydin University
WT  - DergiPark
SN  - 2146-0604
SP  - 1589
EP  - 1592
VL  - 8
IS  - 3
LA  - en
AB  - Abstract - In the presented study, an experimental setup was developed in order to measure the friction coefficient and examinethe material flow during upsetting. A grid pattern was printed on the side and upper surfaces of ring shaped test specimen, andphotos of the final positions of the grids were taken for different upset ratios. Grid deformation views and the standard procedurefor friction coefficient determination were used in the analysis of the ring-compression test results. Two different test materialswere upset to different ratios in the tests and the friction coefficients for unlubricated conditions were determined. The frictioncoefficients are harmonious with similar test results as expected. Variation in the grid dimensions with respect to deformation ratiosoffer a better analysis for the ring deformations.
KW  - Friction
KW  - Ring - compression
KW  - deformation
CR  - [1] Male AT, Cockroft MG. “A method for the deformation of coefficient of friction of metals under bulk plastic
deformation”. J Ins Met 1964– 1965;93:38–46.
[2] Koboyashi S. “Deformation characteristics and ductile fracture at 1040 steel in simple upsetting of solid cylinders
and rings”. ASME Paper 69-WA/Prod-14 1–8; 1970.
[3] Lange K. “Handbook of metal forming”. USA: McGraw-Hill International Book Company; 1985.
[4] Dieter GE. “Mechanical metallurgy. second ed”. Japan: McGraw-Hill International Book Company; 1984.
[5] Sahin M, Cetinarslan CS, Akata HE; “Effect of Surface Roughness on Friction Coefficients During Upsetting
Processes for Different Materials”, Materials & Design 28 (2): 633-640 2007
[6] Rajesh E, SivaPrakash M., “Analysis of friction factor by employing the ring compression test under different
lubricants” International Journal of Scientific & Engineering Research, Volume 4, Issue 5, 1163-1170, May-2013
1163 ISSN 2229-5518
UR  - https://dergipark.org.tr/en/pub/ijemme/issue//546210
L1  - https://dergipark.org.tr/en/download/article-file/682502
ER  -