TY  - JOUR
T1  - CORROSION BEHAVIOR OF ANNEALED STAINLESS STEEL MESH IN DIFFERENT ELECTROLYTES
TT  - Paslanmaz Çelik Ağının Farklı Elektrolitler İçerisindeki Elektrokimyasal Davranışları
AU  - Yavuz, Abdulcabbar
AU  - Kaplan, Kaan
AU  - Aktas, Sitki
PY  - 2020
DA  - April
Y2  - 2020
DO  - 10.17482/uumfd.597448
JF  - Uludağ Üniversitesi Mühendislik Fakültesi Dergisi
JO  - UUJFE
PB  - Bursa Uludağ University
WT  - DergiPark
SN  - 2148-4155
SP  - 501
EP  - 510
VL  - 25
IS  - 1
LA  - en
AB  - The aim of this study was to investigate thecorrosion behaviour of annealed stainless steel mesh. Thermal oxidationtreatments were applied to steel mesh in a muffle furnace at 500 ᵒC, 700 ᵒC and900 ᵒC. Surface morphology of annealed and non-annealed stainless steel mesheswas compared before and after polarization. Roughness of the steel surface wasincreased after heat-treatment. The corrosion properties of non-annealed andannealed steel were determined using linear sweep voltammetry. The corrosion behaviourof annealed stainless steel was examined by means of a potentiostat in a 3.5wt.% NaCl, 1 M H2SO4 and 1 M KOH electrolytes. The corrosion susceptibility of heat treatedstainless steel was more than that of non-heat treated stainless steel inalkaline electrolyte. While pitting corrosion of non-annealed and annealedstainless steel was different, corrosion potential and current of steel meshwithout heat treatment was the same as the steel meshes annealed at 500 ᵒC and700 ᵒC. Corrosion current and corrosion potential of non-annealed steel was thesame as 500 ᵒC annealed steel mesh in acidic medium.
KW  - Corrosion
KW  - Stainless Steel
KW  - Heat-treatment
KW  - Thermal Oxidation
N2  - Bu çalışmanın amacı, tavlanmış paslanmaz çelik ağınkorozyon davranışını incelemektir. Çelik ağa 500 ᵒC, 700 ᵒC ve 900 ᵒC'de birkül fırını içerisinde termal oksidasyon işlemleri uygulanmıştır. Tavlanmış vetavlanmamış paslanmaz çelik ağların yüzey morfolojisi Elektrokimyasalpolarizasyondan önce ve sonra karşılaştırılmıştır. Isıl işlemden sonra çelikyüzeyin pürüzlülüğü artmıştır. Tavlanmamış ve tavlanmış çeliğin korozyonözellikleri doğrusal tarama voltametrisi kullanılarak belirlenmiştir. Tavlıpaslanmaz çeliğin korozyon davranışı, ağırlıkça % 3.5'lik NaCl, 1 M H2SO4ve 1 M KOH elektrolitlerinde bir potansiyostat ile incelenmiştir. Isıl işlemgörmüş paslanmaz çeliğin korozyon duyarlılığı, alkalin elektrolitte ısıl işlemgörmemiş paslanmaz çeliğinkinden daha fazlaydı. Tavlanmamış ve tavlanmışpaslanmaz çeliğin çukur korozyonu farklıyken, ısıl işlem uygulanmayan çelikağın korozyon akımı ve korozyon potansiyeli 500 ᵒC ve 700 ᵒC'de tavlanan çelikağlarla aynıydı. Tavlanmamış çeliğin korozyon akımı ve korozyon potansiyeliasidik ortamda 500 ᵒC tavlanmış çelik ağınkiyle aynıydı.
CR  - 1.	Askari, M. B., Beheshti-Marnani, A., Seifi, M., Rozati, S. M., & Salarizadeh, P. (2019). Fe3O4@ MoS2/RGO as an effective nano-electrocatalyst toward electrochemical hydrogen evolution reaction and methanol oxidation in two settings for fuel cell application. Journal of Colloid and Interface Science, 537, 186–196.
CR  - 2.	Biswas, A., Mourya, P., Mondal, D., Pal, S., & Udayabhanu, G. (2018). Grafting effect of gum acacia on mild steel corrosion in acidic medium: Gravimetric and electrochemical study. Journal of Molecular Liquids, 251, 470–479.
CR  - 3.	Bregliozzi, G., Di Schino, A., Ahmed, S.-U., Kenny, J. M., & Haefke, H. (2005). Cavitation wear behaviour of austenitic stainless steels with different grain sizes. Wear, 258(1–4), 503–510.
CR  - 4.	Devikala, S., Kamaraj, P., Arthanareeswari, M., & Patel, M. B. (2019). Green corrosion inhibition of mild steel by aqueous Allium sativum extract in 3.5% NaCl. Materials Today: Proceedings, 14, 580–589.
CR  - 5.	Du, X., Wang, C., Chen, M., Jiao, Y., & Wang, J. (2009). Electrochemical performances of nanoparticle Fe3O4/activated carbon supercapacitor using KOH electrolyte solution. The Journal of Physical Chemistry C, 113(6), 2643–2646.
CR  - 6.	Eskandari, M., Najafizadeh, A., Kermanpur, A., & Karimi, M. (2009). Potential application of nanocrystalline 301 austenitic stainless steel in lightweight vehicle structures. Materials & Design, 30(9), 3869–3872.
CR  - 7.	Ferreira, M. G. S., Hakiki, N. E., Goodlet, G., Faty, S., Simoes, A. M. P., & Belo, M. D. C. (2001). Influence of the temperature of film formation on the electronic structure of oxide films formed on 304 stainless steel. Electrochimica Acta, 46(24–25), 3767–3776.
CR  - 8.	Fiore, M., Longoni, G., Santangelo, S., Pantò, F., Stelitano, S., Frontera, P., Antonucci, P., & Ruffo, R. (2018). Electrochemical characterization of highly abundant, low cost iron (III) oxide as anode material for sodium-ion rechargeable batteries. Electrochimica Acta, 269, 367–377.
CR  - 9.	Hamadou, L., Kadri, A., & Benbrahim, N. (2010). Impedance investigation of thermally formed oxide films on AISI 304L stainless steel. Corrosion Science, 52(3), 859–864. https://doi.org/10.1016/j.corsci.2009.11.004
CR  - 10.	Hassan, N., Ali, S. M., Ebrahim, A., & El-Adwy, H. (2019). Performance evaluation and optimization of Camellia sinensis extract as green corrosion inhibitor for mild steel in acidic medium. Materials Research Express, 6(8), 0865c7.
CR  - 11.	Hassanien, A. S., & Akl, A. A. (2018). Optical characteristics of iron oxide thin films prepared by spray pyrolysis technique at different substrate temperatures. Applied Physics A, 124(11), 752.
CR  - 12.	Hermas, A. A., Ogura, K., Takagi, S., & Adachi, T. (1995). Effects of alloying additions on corrosion and passivation behaviors of type 304 stainless steel. Corrosion, 51(1), 3–10.
CR  - 13.	Karlsson, B., & Ribbing, C. G. (1982). Optical constants and spectral selectivity of stainless steel and its oxides. Journal of Applied Physics, 53(9), 6340–6346. https://doi.org/10.1063/1.331503
CR  - 14.	Köçkar, H., Karaagac, O., & Özel, F. (2019). Effects of biocompatible surfactants on structural and corresponding magnetic properties of iron oxide nanoparticles coated by hydrothermal process. Journal of Magnetism and Magnetic Materials, 474, 332–336.
CR  - 15.	Lassoued, A., Lassoued, M. S., Dkhil, B., Ammar, S., & Gadri, A. (2018). Synthesis, structural, morphological, optical and magnetic characterization of iron oxide (α-Fe2O3) nanoparticles by precipitation method: effect of varying the nature of precursor. Physica E: Low-Dimensional Systems and Nanostructures, 97, 328–334.
CR  - 16.	Lin, J., Silvertsen, J., & Judy, J. (1985). Properties of RF sputtered iron oxide thin films with CoCr and Nb as dopants. IEEE Transactions on Magnetics, 21(5), 1462–1464.
CR  - 17.	Lindner, T., Kutschmann, P., Löbel, M., & Lampke, T. (2018). Hardening of HVOF-sprayed austenitic stainless-steel coatings by gas nitriding. Coatings, 8(10), 348.
CR  - 18.	Liu, L., Lang, J., Zhang, P., Hu, B., & Yan, X. (2016). Facile synthesis of Fe2O3 nano-dots@ nitrogen-doped graphene for supercapacitor electrode with ultralong cycle life in KOH electrolyte. ACS Applied Materials & Interfaces, 8(14), 9335–9344.
CR  - 19.	Lo, K. H., Shek, C. H., & Lai, J. K. L. (2009). Recent developments in stainless steels. Materials Science and Engineering: R: Reports, 65(4–6), 39–104.
CR  - 20.	López-Sánchez, J., Serrano, A., del Campo, A., Abuín, M., Salas-Colera, E., Muñoz-Noval, A., Castro, G. R., de la Figuera, J., Marco, J. F., & Marín, P. (2019). Self-assembly of iron oxide precursor micelles driven by magnetic stirring time in sol–gel coatings. RSC Advances, 9(31), 17571–17580.
CR  - 21.	Martinez, L., Leinen, D., Martin, F., Gabas, M., Ramos-Barrado, J. R., Quagliata, E., & Dalchiele, E. A. (2007). Electrochemical growth of diverse iron oxide (Fe3O4, α-FeOOH, and γ-FeOOH) thin films by electrodeposition potential tuning. Journal of the Electrochemical Society, 154(3), D126–D133.
CR  - 22.	Muhaffel, F., & Cimenoglu, H. (2019). Development of corrosion and wear resistant micro-arc oxidation coating on a magnesium alloy. Surface and Coatings Technology, 357, 822–832.
CR  - 23.	Pardo, A., Merino, M. C., Coy, A. E., Viejo, F., Arrabal, R., & Matykina, E. (2008). Pitting corrosion behaviour of austenitic stainless steels–combining effects of Mn and Mo additions. Corrosion Science, 50(6), 1796–1806.
CR  - 24.	Phul, R., Shrivastava, V., Farooq, U., Sardar, M., Kalam, A., Al-Sehemi, A. G., & Ahmad, T. (2019). One pot synthesis and surface modification of mesoporous iron oxide nanoparticles. Nano-Structures & Nano-Objects, 19, 100343.
CR  - 25.	Pippenger, B. E., Rottmar, M., Kopf, B. S., Stübinger, S., Dalla Torre, F. H., Berner, S., & Maniura‐Weber, K. (2019). Surface modification of ultrafine‐grained titanium: Influence on mechanical properties, cytocompatibility, and osseointegration potential. Clinical Oral Implants Research, 30(1), 99–110.
CR  - 26.	Saad, I. R., Abdel-Gaber, A. M., Younes, G. O., & Nsouli, B. (2018). Corrosion Inhibition of Mild Steel in Acidic Solutions Using 1, 2, 4-Triazolo [1, 5-a] pyrimidine. Russian Journal of Applied Chemistry, 91(2), 245–252.
CR  - 27.	Tartaj, P., Morales, M. P., Gonzalez‐Carreño, T., Veintemillas‐Verdaguer, S., & Serna, C. J. (2011). The iron oxides strike back: from biomedical applications to energy storage devices and photoelectrochemical water splitting. Advanced Materials, 23(44), 5243–5249.
CR  - 28.	Vesel, A., Mozetic, M., Drenik, A., Hauptman, N., & Balat-Pichelin, M. (2008). High temperature oxidation of stainless steel AISI316L in air plasma. Applied Surface Science, 255(5 PART 1), 1759–1765. https://doi.org/10.1016/j.apsusc.2008.06.017
CR  - 29.	Yang, J., Lu, Y., Guo, Z., Gu, J., & Gu, C. (2018). Corrosion behaviour of a quenched and partitioned medium carbon steel in 3.5 wt.% NaCl solution. Corrosion Science, 130, 64–75.
CR  - 30.	Yu, L., Han, R., Sang, X., Liu, J., Thomas, M. P., Hudak, B. M., Patel, A., Page, K., & Guiton, B. S. (2018). Shell-induced Ostwald ripening: simultaneous structure, composition, and morphology transformations during the creation of hollow iron oxide nanocapsules. ACS Nano, 12(9), 9051–9059.
CR  - 31.	Zhang, G., Wu, L., Tang, A., Ma, Y., Song, G.-L., Zheng, D., Jiang, B., Atrens, A., & Pan, F. (2018). Active corrosion protection by a smart coating based on a MgAl-layered double hydroxide on a cerium-modified plasma electrolytic oxidation coating on Mg alloy AZ31. Corrosion Science, 139, 370–382.
CR  - 32.	Zhou, G., & Yang, J. C. (2004). Temperature effects on the growth of oxide islands on Cu (1 1 0). Applied Surface Science, 222(1–4), 357–364.
UR  - https://doi.org/10.17482/uumfd.597448
L1  - https://dergipark.org.tr/en/download/article-file/1069662
ER  -