TY  - JOUR
T1  - Some Properties of Fiberboard Manufactured with Wastes of Kraft Pulp Mill
TT  - Some Properties of Fiberboard Manufactured with Wastes of Kraft Pulp Mill
AU  - Ustaömer, Derya
AU  - Ersoy Kalyoncu, Evren
AU  - Kırcı, Hüseyin
PY  - 2019
DA  - December
Y2  - 2019
DO  - 10.35229/jaes.641828
JF  - Journal of Anatolian Environmental and Animal Sciences
JO  - JAES
PB  - Bülent VEREP
WT  - DergiPark
SN  - 2548-0006
SP  - 632
EP  - 637
VL  - 4
IS  - 4
LA  - en
AB  - In this study, it was aimed to investigate the usability of some wastessuch as wood chip screening rejects and kraft pulp screening rejects as fibrousmaterials in the manufacture of medium density fiberboard (MDF). Chip screening rejects were refined with a laboratory type refiner;however, pulp screening rejects were not refined. These materialswere added to commercial fibers with the rates of 10%, 30%. Fiberboards weremanufactured using urea formaldehyde (UF) adhesive. Some properties of thesefiberboards such as water absorption (WA), thickness swelling (TS), surfaceroughness parameters, color change, modulus of rupture (MOR) and modulus ofelasticity (MOE) values were determined. As a result of these, it was foundthat all values showed different trend depending on rates and types of Kraftmill wastes. Generally, the use of thesematerials had positive effects on the panel properties.
KW  - Fiberboard
KW  - Pulp fiber
KW  - Kraft process
KW  - Screening rejects
KW  - Wood chips
N2  - Bu çalışmada, odun yonga elemeatıklarının ve kraft hamuru elek atıklarının lifsel materyaller olarak ortayoğunlukta lif levha (MDF) üretiminde kullanımının uygunluğu araştırılmıştır. Yongaeleme atıkları, laboratuvar tipi bir rafinörde liflendirilirken; hamur elemeatıkları ise rafinör işlemine uğratılmadan kullanılmıştır. Elde edilen lifselmateryaller ticari liflere %10 ve %30 oranlarında ilave edilmiş ve üreformaldehit (UF) tutkalı kullanılarak lif levha üretimlerigerçekleştirilmiştir. Üretilen bu levhaların su alma (SA), kalınlığına şişme(KŞ) değerleri, yüzey pürüzlülük parametreleri, renk değişim değerleri, eğilmedirenci (MOR) ve eğilmede elastikiyet modülü (MOE) gibi bazı özellikleri belirlenmiştir.Bu çalışmanın sonucu olarak, tümdeğerlerin, kraft fabrika atıklarının türü ve kullanım oranına bağlı olarakdeğişim gösterdiği belirlenmiştir. Genel olarak, bu atık materyallerinkullanımının levha özellikleri üzerinde olumlu yönde etkisinin olduğu tespitedilmiştir.
CR  - Akgül, M. & Çamlibel, O. (2008). Manufacture of medium density fiberboard (MDF) panels from rhododendron (R. ponticum L.) biomass. Building and Environment, 43 (4), 438–443.
CR  - Akgül, M. & Tozluoğlu, A. (2008). Utilizing peanut husk (Arachis hypogaea L.) in the manufacture of medium-density fiberboards. Bioresource Technology, 99(13), 5590–5594.
CR  - Bajpai, P. (2010). Overview of Pulp and Papermaking Processes in “Environmentally friendly production of pulp and paper” P. Bajpai, Eds., Springer International Publishing, United States of America, pp.8-45.
CR  - Bajpai, P. (2015). Generation of Waste in Pulp and Paper Mills in “Management of pulp and paper mill waste”, P. Bajpai, Eds., Springer International Publishing, Switzerland, pp. 9-17.
CR  - Biermann, C. J. (1996).  Refining and pulp characterization in “Handbook of pulping and papermaking”, C. J. Biermann, Eds., Academic Press, Cambridge, pp. 137-157.
CR  - Clark, JdA. (1985). Pulp technology and treatment for paper, 2nd Ed. Miller Freeman Publications, San Francisco, CA. 878 pp.
CR  - DIN 4768 (1990). Determination of values of surface roughness parameters Ra, Rz, Rmax using electrical contact (stylus) instruments, concepts and measuring conditions. Deutsches Institut für Norming, Berlin, Germany.
CR  - EN 310 (1993). Wood Based Panels, Determination of Modulus of Elasticity in Bending and Bending Strength, European Committee for Standardization, Brussels, Belgium.
CR  - EN 317 (1993). Particleboards and Fiberboards, Determination of Swelling in Thickness After Immersion, European Committee for Standardization, Brussels, Belgium.
CR  - Enqvist , E. (2006). Impregnation, vapor phase and methanol as means of intensifying the softwood kraft pulping process, Ph.D Thesis, Helsinki University of Technology, Espoo, Finland.
CR  - Eriksen, J.T., Hauan, S., Gaure, K. & Mattans, A.L. (1981). Consequences of chip quality for processes and pulp quality in TMP production. International Mechanical Pulping Conference, June 1981, Oslo, Norway, 19-21.
CR  - Gavrilescu, D. (2004). Solid Waste Generation in Kraft Pulp Mills. Environmental Engineering and Management Journal, 3, 399–404.
CR  - Gerald, K. (2006).  Raw material for pulp in “Handbook of Pulp” H. Sixta H, Eds. Wiley-VCH Verlag GmbH & Co. KgaA publishers, Germany. pp. 21–68.
CR  - Gullichsen, J. (1999). Fiber Line Operations, in “Papermaking Science and Technology, Book 6A, Chemical Pulping”, J.Gullichsen and C.J. Fogelholm, Eds., Fapet Oy, Helsinki pp. A19-A244.
CR  - Hart, P.W. (2011). Production of high yield bleached hardwood Kraft pulp: Breaking the Kraft pulp yield barrier. Tappi Journal, 10(9), 37-41.
CR  - Hiziroglu, S. & Kosonkorn, P. (2006). Evaluation of surface roughness of Thai medium density fiberboard (MDF). Building and Environment, 41, 527-533.
CR  - Hunter Associates Laboratory (2008). CIEL*a*b* color scale. Applications note insight on color, HunterLab, 8 (9):1-4. https://support.hunterlab.com/hc/en-us/article_attachments/201440625/an08_96a2.pdf .  (10 August 2018).
CR  - Johansonn, A. (2011). Correlations between fibre properties and paper properties, PhD Thesis, KTH Royal Institute of Technology, Stockholm, Sweden.
CR  - Kırcı, H. (2000). Paper pulping industry lecture notes, KTU. Faculty of Forestry Publication, No. 63 Trabzon.
CR  - Luukko, K. & Maloney, T. C. (1999). Swelling of mechanical pulp fibers. In “Cellulose”, Kluwer Academic Publishers, Netherlands pp.123-135.
CR  - Migneault, S.,  Nadji, H.,  Riedl, B.,  Deng, J., Zhang, T. & Koubaa, A. (2010). Medium Density Fiberboards Produced Using Pulp and Paper Sludge from Different Pulping Processes. Wood Fib. Sc., 42(3), 292-303.
CR  - Nourbakhsh, A. & Ashori, A. (2009). Preparation and Properties of Wood Plastic Composites Made of Recycled HDPE. Compos. Mater. 43 (8), 877-883.
CR  - Smook, G.A. (2002). Handbook for pulp and paper technologists, 3rd Ed. Angus Wilde Publications, Vancouver, Canada, 419 pp.
CR  - Sundholm, J. (1999). What is Mechanical Pulp, in “Mechanical pulping, papermaking science and Technology, Book 5”, Fapet Oy, Helsinki pp. 16-21.
CR  - Tikka, P., Tahkanen, H. & Kovasin, K. (1993). Chip Thickness vs. Kraft Pulping Performance: Experiments by Multiple Hanging Baskets in Batch Digesters. Tappi Journal, 76(3), 131–136.
CR  - TS-642-ISO 554 (1997). Conditioning and/or Standard Atmospheres for Trial and Standard Reference Atmosphere. TSE, Ankara.
CR  - TS EN 326-1 (1999). Wood-Based Panels-Sampling, Cutting and Inspection-Part 1: Sampling Test Pieces and Expression of Test Results. TSE, Ankara.
CR  - Twede, D.,  Selke,  S.E.M., Kamdem, D.P & Shires, D. (2014). Cartons, crates and corrugated board, Second Edition: Handbook of Paper and Wood Packaging Technology, Destech Publications, Inc., pp 584.
CR  - URL1.http://events.risiinfo.com/woodfibers/sites/default/files/presentations/2017/Tian%20Presentation .pdf. (10 August 2018).
CR  - URL2. https://www.fpl.fs.fed.us/documnts/fplrn/fplrn045.pdf. (10 August 2018).
CR  - URL3.https://sensing.konicaminolta.us/blog/identifying-color-differences-using-l-a-b-or-l-c-h-coordinates/. (10 August 2018).
CR  - Vaaler,  D.A & Moe, S.T. (2001). Carbohydrate profiles of kraft pulps manufactured with white liquor additives. 11th International Symposium on Wood and Pulping Chemistry, 11-14 June 2001, Nice, France, 99. 279-282.
UR  - https://doi.org/10.35229/jaes.641828
L1  - https://dergipark.org.tr/en/download/article-file/901028
ER  -