TY  - JOUR
T1  - DETERMINATION OF THE CRITICAL POINT ON SNIPER BARREL IN TERMS OF THE STRESS AND DEFORMATION CONCEPTS
AU  - Doğru, Mehmet Hanifi
PY  - 2019
DA  - December
Y2  - 2019
JF  - The International Journal of Materials and Engineering Technology
JO  - TIJMET
PB  - Necip Fazıl YILMAZ
WT  - DergiPark
SN  - 2667-4033
SP  - 60
EP  - 63
VL  - 2
IS  - 2
LA  - en
AB  - AbstractThe impact performance of the material is criticalproperty in the weapon industry. In particular, the pressure distribution conceptin barrel has revealed the need to work on this issue. Therefore, the behaviorof the barrel was investigated, when the explosion pressure was realized in thebarrel. In this study, different pressure values were applied to the inside ofthe barrel to obtain a critical stress region. The barrel of the new generationlong-range sniper weapon of the American Barret company, which is legendarywith the M82A series, was used. 3D barrel model was created in SOLIDWORKSprogram. ANSYS workbench static structural toolbox wasused to perform the proposed study. Within this study, the critical points insniper weapon barrel were determined in terms of the stress and deformationconcepts.
KW  - Barrel
KW  - Numerical analyses
KW  - 
KW  - Pressure distribution
KW  - 
KW  - Deformation and stress values
CR  - Ben-Dor, G., A. Dubinsky, and T. Elperin, Engineering approach to penetration modeling. Engineering Fracture Mechanics, 2008. 75(14): 4279-4282.
CR  - Ben-Dor, G., A. Dubinsky, and T. Elperin, A model of high speed penetration into ductile targets. Theoretical and applied fracture mechanics, 1998. 28(3):237-239.
CR  - Ben-Dor, G., A. Dubinsky, and T. Elperin, On the Lambert–Jonas approximation for ballistic impact. Mechanics Research Communications, 2002. 29(2):137-139.
CR  - Lambert, J.P., Jonas, G.H., Report. 1976, Ballistic Res. Lab.
CR  - Recht, R. and T. Ipson, Ballistic perforation dynamics. Journal of Applied Mechanics, 1963. 30(3):384-390.
CR  - Yıldırım, F., The Effect of Geometric Changes of Propellants which Used in Large Caliber Weapons on Barrel Pressure and Muzzle Velocity, Ankara University Graduate School of Natural and Applied Sciences Department of Engineering Physics, 2013, M.Sc Thesis.
CR  - Işık, H., Modeling the Ballistic Parameters in a Barrel, The Journal of Defense Sciences, 2016, 15(2): 157-177.
CR  - Chang-wie, W., Yong-hai, W., Qin-man, F., Analysis of Temperature and Stress of a Thin-Walled Cylinder based on FEM, Applied Mechanics and Materials Vols 373-375 2013:12-15.
CR  - Gullerova, M., Design of a Trigger Mechanism for a Sniper Rifle, American International Journal of Contemporary Research, 2012, 2(7):106-117.
CR  - Micković, D., Jaramaz, S., Elek, P., Jaramaz, D., & Micković, D., Determination of pressure profiles behind projectiles during interior ballistic cycle. Journal of Applied Mechanics, 2013, 80(3): 031402.
CR  - Yu, W., Zhang, X., Numerical Simulation and Analysis of the Muzzle Flow During the Revolving Barrel Gun Firing, Journal of Applied Mechanics, 2013, Vol. 80: 031602-1.
UR  - https://dergipark.org.tr/en/pub/tijmet/issue//642841
L1  - https://dergipark.org.tr/en/download/article-file/883977
ER  -