TY - JOUR T1 - Workwear fabric suitability to molten metal industry AU - Kutlu, Bengi AU - Bitgen, Tuğçem PY - 2020 DA - December Y2 - 2020 DO - 10.32710/tekstilvekonfeksiyon.738092 JF - Textile and Apparel PB - Ege University WT - DergiPark SN - 1300-3356 SP - 289 EP - 295 VL - 30 IS - 4 LA - en AB - In the scope of the foundry processes, there are vital risks when melting of metals at high temperatures, carrying this molten metal to molds and pouring it to molds. In this study, wide range of workwear materials which are used in foundries in Turkey were collected and their protection properties were investigated to observe their performances. Determining suitable material to molten metal processing was aimed. These workwear materials were produced from FR-cotton, cotton denim, modacrylic-viscose-FR cotton, meta-aramid, aluminized aramid, FR viscose-wool-polyamide and leather. Their performances were very different. Except from meta-aramid and both of the FR cotton fabrics, other fabrics failed flame spread. Contrary to flame spread, leather, aluminized aramid, FR viscose-wool-polyamide and cotton denim materials showed the highest values in molten metal protection test. Besides, leather had no air permeability but has some water vapor permeability and aluminized aramid has poor air and water permeabilities. KW - Molten metal KW - workwear KW - protective clothing KW - molten aluminium KW - foundry CR - Referans1. Tudoksad (Turkish Foundry Association), 2020, April 20, We add value to metals, retrieved from https://www.tudoksad.org.tr/upload/files/Dokum_Sanayi_Bilgi_Foyu.pdf CR - Referans2. Mäkinen, H. 2013. Flame Resistant Textiles for Molten Metal Hazards, In F.S. Kilinc (Ed.), Handbook of Fire Resistant Textiles, Cambridge: Woodhead Publishing Limited, pp.581-602. CR - Referans3. Barker, R., Yener, M. 1981. Evaluating the Resistance of Some Protective Fabrics to Molten Iron, Textile Research Journal 1981; 51; 533 CR - Referans4. Benisek, L., Edmondson, G.K., Philips, W.A. 1979. Protective Clothing—Evaluation of Wool and Other Fabrics Textile Research Journal 1979; 49; 212 CR - Referans5. Benisek, L., Edmondson, G.K., 1981. Protective Clothing Fabrics: Part I. Against Molten Metal Hazards1 Textile Research Journal 1981; 51; 182 CR - Referans6. Proctor, T.D. and Thompson, H. 1992. Effect of Fabric Finish On the Adhesion of Molten Metal to Wool, Performance of Protective Clothing: Fourth Volume, ASTM STP 1133, James P. McBriarty and Norman W.Henry, Eds., American Society for Testing and Materials, Philadelphia CR - Referans7. Benisek, L., Edmondson, G.K., 1984. Effect of Chrome Dyeing on Protection of Wool Against Molten Aluminium, Textile Research Journal 1984; 54; 214 CR - Referans8. Coughlan, J.E. 1992. Protective Clothing Development at New Zealand Aluminum Smelters Ltd., Performance of Frotective Clothing; Fourth Volume, ASTM STP 1135, J. P. McBriarty and N. W. Henry, Eds., American Society for Testing and Materials, Philadelphaia, p.252 CR - Referans9. Magnússon, V., Gunnarsson, G. & Jónsson, H. 2001. Safety Clothing for the Aluminium Industry, 1st International Conference and Workshop on Anode Rodding Plants for Primary Aluminium, Reykjavik, Iceland CR - Referans10. Mäkinen, H., Laiho, H., Pajunen, P., 1997. 'Evaluation of the Protective Performance of Fabrics and Fabric Combinations against Molten Iron,' Performance of Protective Clothing: Sixth Volume, ASTM STP 1273, Jeffrey O. Stull and Arthur D. Schwope, Eds., American Society for Testing and Materials, CR - Referans11. 11. Lee, M, 2009. Recent Developments In Australian Aluminium Casthouse Personal Protective Clothing, Materials Science Forum, Vol.630, pp.19-25. CR - Referans12. Gabara, V. 1994. High performance fibers 1: Aramid fibers, H. Brody, (Ed.), Synthetic fiber metarialism, New York: Longman publishing group. pp.239-260 CR - Referans13. Hearle, J. W. S. ve Morton, W E. (2008), Physical properties of textile fibres (4th Ed.). Cambridge: Woodhead Publishing Limited. CR - Referans14. Fan, J. (2009). Durability of fabric and garment. J. Fan. ve L. Hunter, (Ed.), Engineering Apparel Fabrics and Garments. Boca Raton: Woodhead Publishing Limited. pp.161-195. CR - Referans15. Bunsell, A.R. (Ed.) 2009. Handbook of tensile properties of textile and technical fibres. United Kingdom: Woodhead Publishing Limited. CR - Referans16. Horrocks, A. R. 2014. High performance textile for heat and fire protection. C. Lawrence, (Ed.), High Performance Textile For Heat and Fire Protection. Cambridge: Woodhead Publishing Limited. pp.144-190. UR - https://doi.org/10.32710/tekstilvekonfeksiyon.738092 L1 - https://dergipark.org.tr/en/download/article-file/1105791 ER -