TY  - JOUR
T1  - Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet
AU  - Canel, Timur
AU  - Bağlan, İrem
PY  - 2020
DA  - December
JF  - Turkish Journal of Science
JO  - TJOS
PB  - Ahmet Ocak AKDEMİR
WT  - DergiPark
SN  - 2587-0971
SP  - 252
EP  - 256
VL  - 5
IS  - 3
LA  - en
AB  - Variation of the groove size depending on the laser power has been modeled in this proposedmathematical model. It is obtained by polymerization of Polyoxymethylene formaldehyde, a semi-crystallinepolymer, and is among the hardest and strongest thermoplastics. Polyoxymethylene can be used in slip frictionpairs without lubrication. Polyoxymethylene materials are widely used for materials in tribologicalapplications. They also show good friction properties.
KW  - mathematical modeling
KW  - Polyoxmethylene
KW  - Fourier method
KW  - Laser ablation
KW  - Surface texturing
CR  - Reference1 
M.H. Cho, S. Park, Micro CNC surface texturing on polyoxymethylene (POM) and its tribological performance in lubricated sliding, Tribology International, 2011, 44: 859-867.
CR  - Reference2
V. Belaud, S. Valette, G. Stremsdoerfer, B. Beaugıraud, E. Audouard, And S. Benayoun, Femtosecond Laser Ablation of Polypropylene: A Statistical Approach of Morphological Data, Scanning 2014, Vol. 36, 209–217
CR  - Reference3
S. Lazare, J. Lopez, F. Weisbuch, High-aspect-ratio microdrilling in olymericmaterials  with intense KrF laser radiation, Appl. Phys. 1999, A 69 [Suppl.], S1–S6
CR  - Reference4
S. Lazare And V. Tokarev, Recent Experimental and Theoretical Advances in Microdrilling of Polymers with Ultraviolet Laser Beams, Fifth International Symposium on Laser Precision Microfabrication, Proceedings of SPIE 2004, Vol. 5662, 221-231.
CR  - Reference5
T. Canel, A.U. Kaya, B. Çelik, Parameter optimization of nanosecond laser for microdrilling on PVC by Taguchi method, Optics & Laser Technology, 2012, 44; 2347-2353
CR  - Reference6
T. Canel, E. Kayahan, L. Candan, S. Fidan, T. Sınmazçelik, Influence of laser parameters in surface texturing of polyphenylene sulfide composites, J. Appl. Polym. Scı. 2019, Doi: 10.1002/App.47976
CR  - Reference7
T. Canel, M. Zeren, T. Sınmazcelik, Laser parameters optimization of surface treating of Al 6082-T6 with Taguchi method, Optics & Laser Technology, 2019, 120; 105714
CR  - Reference8
T. Canel, İ. Bağlan, T. Sinmazcelik, Mathematical modelling of laser ablation of random oriented short glass fiber reinforced Polyphenylene sulphide (PPS) polymer composite. Optics & Laser Technology, 2019, 115; 481-486
CR  - Reference9
T. Canel, İ. Bağlan, T. Sınmazçelik, Mathematical modeling of heat distribution on carbon fiber Poly(etherether-ketone) (PEEK) composite during laser ablation, Optics & Laser Technology, 2020, 127; 106190
CR  - Reference10
T. Canel, İ. Bağlan, Mathematical Modelling of One Dimensional Temperature Distribution As A Function Of Laser Intensity On Carbon Fiber Reinforced Poly(Ether-Ether-Ketone)-(Peek) Composite, TWMS J. App. and Eng. Math. 2020, V.10, N.3, pp. 769-777
UR  - https://dergipark.org.tr/en/pub/tjos/issue//832800
L1  - https://dergipark.org.tr/en/download/article-file/1420271
ER  -