TY  - JOUR
T1  - INVESTIGATION of MECHANICAL PROPERTIES of CARBON FIBRE REINFORCED POLYESTER MATRIX COMPOSITE
AU  - Urtekin, Levent
AU  - Güneş, Deniz
AU  - Çanlı, Murat
PY  - 2021
DA  - December
JF  - Journal of Scientific Reports-A
JO  - JSR-A
PB  - Kütahya Dumlupinar University
WT  - DergiPark
SN  - 2687-6167
SP  - 68
EP  - 79
IS  - 047
LA  - en
AB  - This study aimed to administer hand lay-up method for designing composite materials in which unidirectional and biaxial carbon fiber reinforcements are placed in a polyester matrix to generate one, two and three layers at room temperature. The samples were laid up from composite plates with the help of a mold in accordance with the fiber direction angle in accordance with the standards. In order to determine the mechanical properties of the samples, tensile, bending and drop weight low velocity impact tests were performed. The tensile test results in composite materials with the same layer number, pointed out that 00 unidirectional fiber reinforced composite materials performed the highest tensile strength values. On the other hand, the biaxial carbon fiber reinforced composite materials had the highest elasticity values of ±450. The highest elasticity values have been found in the unidirectional carbon fiber reinforcements of composite materials with 00 fiber direction angle in terms of bending test results. The biaxial composite materials with a ±450 fiber direction angle showed the highest values of impact tensile strength in drop weight low velocity impact tests. 00 unidirectional fiber reinforced composite materials, which showed the highest elasticity values in tensile and bending tests, were found to be the composite materials with the highest deformation values in the falling weight low velocity impact tests. It appears that increasing the number of layers caused an increase in the impact strength. They can be an alternative to aluminum and glass fiber reinforced polyester matrix composite materials due to their lightness and strength at the same thickness, which is valuable in boats, caravans and design cars.
KW  - Carbon fiber
KW  - Composite
KW  - Mechanical properties
KW  - Polyester resin
CR  - [1] Wonderly, C., Grenestedt, J., Fernlund, G. and Cepus, E.,(2005), Compos. Part B-Eng., 36(5), 417-426
CR  - [2] Cohades, A., Branfoot, C., Rae, S., Bond, I. and Michaud, V., (2018), Adv. Mater. Interfaces, 5(17), 1800177
CR  - [3] Meng, M., Chua, Y.J., Wouterson, E. and Ong, C.P.K., (2017), Neurocomputing, 257, 128-135
CR  - [4] Sanjay, M.R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S. and Pradeep, S., (2018), J. Clean Prod., 172, 566-581
CR  - [5] Sprenger, S., (2015), J. Compos. Mater., 49(1), 53-63
CR  - [6] Bush, M.A., Bush, P.J. and Miller, R.G., (2006), J. Forensic Sci., 51(3), 636-642
CR  - [7] Nissila, T., Hietala, M. and Oksman, K., (2019), Compos. Part A-Appl. S., 125, 105515
CR  - [8] Reis, A.K.D., Monticelli, F.M., Neves, R.M., de Paula Santos, L.F., Botelho, E.C. and Luis H., (2020), Ornaghi Jr, J. Compos. Mater., 54(27), 4121-4131
CR  - [9] Şahin, Y., (2006)Introduction to composite materials (In Turkish), Seçkin Publishing, Ankara
CR  - [10] Elarabi S.M. and Weidong, Y., (2005), J. Ind. Text., 35, 39-45
CR  - [11] Murugan, R., Ramesh, R. and Padmanabhan, K., (2014), Procedia Eng., 97, 459-468
CR  - [12] Botelho E.C. and Rezende, M.C., (2006), Polym-Plast. Technol., 45, 61-69
CR  - [13] Yağmur, S., Kurt, A. and Şeker, U., (2018), Gazi Univ. J. Sci. Part C: Design Tech., 6(3), 705- 714
CR  - [14] Yetgin, S. H., Ünal, H. and Hatipoğlu, G., (2016), Düzce Univ. S. Tech., 4(1), 167-175
CR  - [15] Zhang, X., Fan, X., Yan, C., Li, H., Zhu, Y., Li, X. and Yu, L., (2012), ACS Appl. Mater. Inter., 4(3), 1543-1552
CR  - [16] Das, T.K., Ghosh, P. and Das, N.C., (2019), Adv. Compos. Hybrid Mater., 1-20
CR  - [17] Eray, S., (2020), In: Metal Oxide Powder Technologies, , Elsevier, Amsterdam, 101-119
CR  - [18] Shin, S.E., Ko, Y.J. and Bae, D., (2016), Compos. Part B-Eng., 106, 66-73
CR  - [19] Xu, Z., Zhang, Y., Zhou, J., Qi, M., Shi, J. and Zhang, J., (2020), J. Appl. Polym. Sci., 137(42), 49302
CR  - [20] Djordjevic, I., Sekulic, D.P. and Stevanovic, M., (2007), J. Reinf. Plast. Comp., 26, 1193-1199
CR  - [21] Karataş M.A. and Gökkaya, H., (2018), Defence Tech., 14(4), 318-326
CR  - [22] Karslı N.G. and Aytac, A., (2013), Compos. Part B-Eng., 51, 270-275
CR  - [23] Dong, F., Hou, G., Cao, F., Yan, F., Liu, L. and Wang, J., (2016), Tribol Int., 101, 291–300
CR  - [24] Engin, K., Koyuncu, T. and Lüle, F., (2015), Anadolu J. Agricult. Sci., 30(1), 43-50
CR  - [25] Henerichs, M., Voss, R., Kuster, F. and Wegener, K., (2015), CIRP J. Manuf. Sci. Tech., 9, 136- 145
CR  - [26] Song, H., (2015), Compos. Part B-Eng., 79, 61-66
CR  - [27] Akbar, İ. and Liew, K.M., (2020), J. Clean. Prod., 274, 123001
CR  - [28] Demir, M.E., Çelik, Y.H. and Kılıçkap, E., (2019), J. Polytech., 22(4), 811-817
CR  - [29] Knoblauch R. and Geddes C.D., (2020), CD, Materials, 13(18), 4004
CR  - [30] Yue Z. and Economy. J., (2017), Woodhead Publishing, Sawston, 61-131,
CR  - [31] Güneş. D., (2019), Master Thesis. Kütahya Dumlupınar University, Kütahya,
CR  - [32] Baral, N., Guezenoc, H., Davies, P. and Baley, C., (2008), Mater. Lett., 62, 1096–1099
CR  - [33] Bergmann, T., Heimbs, S., and Maier, M., (2015), Compos. Struct., 125, 362-373
CR  - [34] Shi, Y., Swait, T. and Soutis, C., (2012), Compos. Struct., 94(9), 2902-2913
CR  - [35] Arslan, G., Fidan, S. and Sınmazçelik, T., (2018), El-Cezeri J. Sci. Eng., 5(1), 182-190
UR  - https://dergipark.org.tr/en/pub/jsr-a/article/978938
L1  - https://dergipark.org.tr/en/download/article-file/1909471
ER  -